{"title":"Bambu Lab X2D","description":"\u003cp data-start=\"155\" data-end=\"380\"\u003eThe Bambu Lab X2 Series introduces dual-nozzle printing in a more accessible, compact platform—bringing cleaner supports, faster multi-material workflows, and improved efficiency without stepping into full industrial systems.\u003c\/p\u003e\n\u003cp data-start=\"382\" data-end=\"599\"\u003eBuilt with an enclosed frame, active chamber heating, and intelligent monitoring, the X2 Series delivers reliable performance across everyday and engineering materials while reducing waste and improving print quality.\u003c\/p\u003e\n\u003cp data-start=\"601\" data-end=\"840\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eIdeal for makers, schools, and growing businesses, X2 Series printers offer a major upgrade from single-nozzle machines—combining multi-color capability, cleaner support removal, and consistent results in a streamlined, easy-to-run system.\u003c\/p\u003e","products":[{"product_id":"bambu-4-in-1-ptfe-adapter","title":"Bambu 4-in-1 PTFE Adapter - P2S \/ X2D \/ P1 \/ X1 Series \/ A2L","description":"\u003ch2 data-start=\"141\" data-end=\"178\"\u003eBambu 4-in-1 PTFE Adapter (FAZ013)\u003c\/h2\u003e\n\u003cp data-start=\"180\" data-end=\"458\"\u003eThe Bambu 4-in-1 PTFE Adapter allows multiple filament feed paths to connect to a single printer input. It expands filament flexibility by letting you use \u003cstrong data-start=\"335\" data-end=\"394\"\u003eAMS alongside up to three additional external filaments\u003c\/strong\u003e, making it ideal for materials that are \u003cstrong data-start=\"435\" data-end=\"457\"\u003enot AMS-compatible\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-start=\"460\" data-end=\"476\"\u003eWhat It Does\u003c\/h3\u003e\n\u003cp data-start=\"477\" data-end=\"678\"\u003e• Combines up to \u003cstrong data-start=\"494\" data-end=\"515\"\u003e4 filament inputs\u003c\/strong\u003e into one PTFE output\u003cbr data-start=\"536\" data-end=\"539\"\u003e• Allows \u003cstrong data-start=\"548\" data-end=\"576\"\u003eAMS + external filaments\u003c\/strong\u003e to remain connected at the same time\u003cbr data-start=\"613\" data-end=\"616\"\u003e• Eliminates repeated tube swapping when switching materials\u003c\/p\u003e\n\u003ch3 data-start=\"680\" data-end=\"700\"\u003eWhy You’d Use It\u003c\/h3\u003e\n\u003cp data-start=\"701\" data-end=\"972\"\u003eThis adapter is especially useful when printing with \u003cstrong data-start=\"754\" data-end=\"811\"\u003eTPU, carbon-fiber, glass-fiber, or abrasive filaments\u003c\/strong\u003e that should not run through the AMS. You can keep AMS loaded for standard materials while feeding specialty filaments externally without disconnecting anything.\u003c\/p\u003e\n\u003ch3 data-start=\"974\" data-end=\"995\"\u003eFilament Capacity\u003c\/h3\u003e\n\u003cp data-start=\"996\" data-end=\"1129\"\u003e• \u003cstrong data-start=\"998\" data-end=\"1021\"\u003eWith AMS connected:\u003c\/strong\u003e\u003cbr data-start=\"1021\" data-end=\"1024\"\u003e– 1 AMS input\u003cbr data-start=\"1039\" data-end=\"1042\"\u003e– Up to 3 additional external filaments\u003cbr data-start=\"1083\" data-end=\"1086\"\u003e– Up to \u003cstrong data-start=\"1096\" data-end=\"1117\"\u003e7 filaments total\u003c\/strong\u003e available\u003c\/p\u003e\n\u003cp data-start=\"1131\" data-end=\"1207\"\u003e• \u003cstrong data-start=\"1133\" data-end=\"1149\"\u003eWithout AMS:\u003c\/strong\u003e\u003cbr data-start=\"1149\" data-end=\"1152\"\u003e– Up to \u003cstrong data-start=\"1162\" data-end=\"1186\"\u003e4 external filaments\u003c\/strong\u003e connected directly\u003c\/p\u003e\n\u003ch3 data-start=\"1209\" data-end=\"1226\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"1227\" data-end=\"1302\"\u003e• \u003cstrong data-start=\"1229\" data-end=\"1242\"\u003eX1 Series\u003c\/strong\u003e\u003cbr data-start=\"1242\" data-end=\"1245\"\u003e• \u003cstrong data-start=\"1247\" data-end=\"1260\"\u003eP1 Series\u003c\/strong\u003e\u003cbr data-start=\"1260\" data-end=\"1263\"\u003e• \u003cstrong data-start=\"1265\" data-end=\"1278\"\u003eH2 Series\u003c\/strong\u003e\u003cbr data-start=\"1278\" data-end=\"1281\"\u003e• \u003cstrong data-start=\"1283\" data-end=\"1290\"\u003eP2S\u003c\/strong\u003e\u003cbr data-start=\"1290\" data-end=\"1293\"\u003e• \u003cstrong data-start=\"1295\" data-end=\"1302\"\u003eH2C\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1304\" data-end=\"1326\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp data-start=\"1327\" data-end=\"1511\"\u003e• OUT port connects to the toolhead PTFE tube\u003cbr data-start=\"1372\" data-end=\"1375\"\u003e• IN ports accept AMS buffer output and\/or direct filament feeds\u003cbr data-start=\"1439\" data-end=\"1442\"\u003e• Direction matters — incorrect orientation may cause filament jams\u003c\/p\u003e\n\u003ch3 data-start=\"1513\" data-end=\"1539\"\u003eProduct Specifications\u003c\/h3\u003e\n\u003cp data-start=\"1540\" data-end=\"1656\"\u003e• Materials: Plastic, metal\u003cbr data-start=\"1567\" data-end=\"1570\"\u003e• Color: Black \/ White\u003cbr data-start=\"1592\" data-end=\"1595\"\u003e• Package size: 60 × 60 × 30 mm\u003cbr data-start=\"1626\" data-end=\"1629\"\u003e• Package weight: 0.03 kg\u003c\/p\u003e\n\u003ch3 data-start=\"1658\" data-end=\"1679\"\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cp data-start=\"1680\" data-end=\"1712\"\u003e• Bambu 4-in-1 PTFE Adapter ×1\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003060457535,"sku":"FAZ013","price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/1ae3857a-FAZ013_1.jpg?v=1757004388"},{"product_id":"bambu-dual-sided-textured-pei-plate","title":"Bambu Dual-Sided Textured PEI Plate - P2S \/ X2D \/ A1 \/ P1 \/ X1 Series","description":"\u003ch2 data-start=\"110\" data-end=\"173\"\u003eBambu Textured PEI Plate – A1 \/ P1 \/ X1 \/ P2S (256 × 256 mm)\u003c\/h2\u003e\n\u003cp data-start=\"175\" data-end=\"461\"\u003eThe Bambu Textured PEI Plate for A1, P1, X1, and \u003cstrong data-start=\"224\" data-end=\"231\"\u003eP2S\u003c\/strong\u003e printers delivers strong first-layer adhesion with easy, tool-free part removal. The powder-coated PEI surface provides a durable textured finish, while the spring steel base ensures excellent magnetic hold and long service life.\u003c\/p\u003e\n\u003ch3 data-start=\"463\" data-end=\"479\"\u003eKey Features\u003c\/h3\u003e\n\u003cp data-start=\"480\" data-end=\"706\"\u003e• Excellent first-layer adhesion for consistent prints\u003cbr data-start=\"534\" data-end=\"537\"\u003e• Self-release surface once cooled\u003cbr data-start=\"571\" data-end=\"574\"\u003e• Durable powder-coated PEI texture\u003cbr data-start=\"609\" data-end=\"612\"\u003e• Flexible spring steel plate for easy removal\u003cbr data-start=\"658\" data-end=\"661\"\u003e• Strong magnetic backing to reduce warping\u003c\/p\u003e\n\u003ch3 data-start=\"708\" data-end=\"725\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"726\" data-end=\"776\"\u003e• A1\u003cbr data-start=\"730\" data-end=\"733\"\u003e• P1 \/ P1P \/ P1S\u003cbr data-start=\"749\" data-end=\"752\"\u003e• X1 \/ X1C\u003cbr data-start=\"762\" data-end=\"765\"\u003e• \u003cstrong data-start=\"767\" data-end=\"774\"\u003eP2S\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"778\" data-end=\"804\"\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp data-start=\"805\" data-end=\"921\"\u003e• PLA\u003cbr data-start=\"810\" data-end=\"813\"\u003e• PETG\u003cbr data-start=\"819\" data-end=\"822\"\u003e• TPU\u003cbr data-start=\"827\" data-end=\"830\"\u003e• ABS\u003cbr data-start=\"835\" data-end=\"838\"\u003e• ASA\u003cbr data-start=\"843\" data-end=\"846\"\u003e• PC\u003cbr data-start=\"850\" data-end=\"853\"\u003e• Nylon (PA)\u003cbr data-start=\"865\" data-end=\"868\"\u003e• Carbon-fiber and glass-fiber reinforced filaments\u003c\/p\u003e\n\u003cp data-start=\"923\" data-end=\"1022\"\u003e\u003cem data-start=\"923\" data-end=\"1022\"\u003eFor higher-temperature materials, enclosed printers such as P1S, X1\/X1C, and P2S are recommended.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1024\" data-end=\"1042\"\u003eSurface Finish\u003c\/h3\u003e\n\u003cp data-start=\"1043\" data-end=\"1171\"\u003e• Textured matte bottom layer\u003cbr data-start=\"1072\" data-end=\"1075\"\u003e• Helps hide first-layer imperfections\u003cbr data-start=\"1113\" data-end=\"1116\"\u003e• Adhesives typically not required for PLA, PETG, TPU\u003c\/p\u003e\n\u003ch3 data-start=\"1173\" data-end=\"1187\"\u003eUse \u0026amp; Care\u003c\/h3\u003e\n\u003cp data-start=\"1188\" data-end=\"1411\"\u003e• Allow plate to cool before removing prints\u003cbr data-start=\"1232\" data-end=\"1235\"\u003e• Clean regularly with hot water and dish soap, then towel dry\u003cbr data-start=\"1297\" data-end=\"1300\"\u003e• Do not use acetone or aggressive solvents\u003cbr data-start=\"1343\" data-end=\"1346\"\u003e• Light sanding (≈600 grit) can help restore adhesion over time\u003c\/p\u003e\n\u003ch3 data-start=\"1413\" data-end=\"1429\"\u003eInstallation\u003c\/h3\u003e\n\u003cp data-start=\"1430\" data-end=\"1541\"\u003e• Align the plate with locating points, name facing up\u003cbr data-start=\"1484\" data-end=\"1487\"\u003e• Lower onto the magnetic heatbed until fully seated\u003c\/p\u003e\n\u003ch3 data-start=\"1543\" data-end=\"1578\"\u003eSpecifications (256 × 256 Size)\u003c\/h3\u003e\n\u003cp data-start=\"1579\" data-end=\"1754\"\u003e• Usable print area: 256 × 256 mm\u003cbr data-start=\"1612\" data-end=\"1615\"\u003e• Plate material: PEI powder coating on spring steel\u003cbr data-start=\"1667\" data-end=\"1670\"\u003e• Steel thickness: approx. 0.5 mm\u003cbr data-start=\"1703\" data-end=\"1706\"\u003e• Surface temperature resistance: up to 180 °C\u003c\/p\u003e\n\u003ch3 data-start=\"1756\" data-end=\"1765\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"1766\" data-end=\"1894\"\u003e• Textured PEI plates are consumable items\u003cbr data-start=\"1808\" data-end=\"1811\"\u003e• Cosmetic wear is normal with use\u003cbr data-start=\"1845\" data-end=\"1848\"\u003e• Warranty covers manufacturing defects only\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003060850751,"sku":"FAP033","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/1339a7b7-logo.png?v=1757004388"},{"product_id":"z-belt","title":"Z Belt - P2S \/ X2D \/ P1 \/ X1 Series","description":"\u003ch3 data-start=\"220\" data-end=\"234\"\u003e\u003cstrong data-start=\"224\" data-end=\"234\"\u003eZ Belt\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"236\" data-end=\"373\"\u003eReplacement Z drive belt used to transmit motion from the Z motor to the lead screws, enabling smooth vertical movement of the print bed.\u003c\/p\u003e\n\u003cp data-start=\"375\" data-end=\"625\"\u003e\u003cstrong data-start=\"375\" data-end=\"388\"\u003eIncluded:\u003c\/strong\u003e 1 × Z belt\u003cbr data-start=\"399\" data-end=\"402\"\u003e\u003cstrong data-start=\"402\" data-end=\"416\"\u003eBelt Type:\u003c\/strong\u003e GT2 close-drive timing belt\u003cbr data-start=\"444\" data-end=\"447\"\u003e\u003cstrong data-start=\"447\" data-end=\"463\"\u003eBelt Length:\u003c\/strong\u003e 1142 mm\u003cbr data-start=\"471\" data-end=\"474\"\u003e\u003cstrong data-start=\"474\" data-end=\"487\"\u003eMaterial:\u003c\/strong\u003e Rubber with fiberglass reinforcement\u003cbr data-start=\"524\" data-end=\"527\"\u003e\u003cstrong data-start=\"527\" data-end=\"545\" data-is-only-node=\"\"\u003eCompatibility:\u003c\/strong\u003e X1 Series, P1 Series\u003cbr data-start=\"566\" data-end=\"569\"\u003e\u003cstrong data-start=\"569\" data-end=\"579\"\u003eNotes:\u003c\/strong\u003e Replacement part only. Installation required.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003064651839,"sku":"FAB002","price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ba495c58-Z_1400x_9a8dc6e5-067c-4265-8535-df6e5c7b5126.webp?v=1757004401"},{"product_id":"bambu-ptfe-tube","title":"Bambu PTFE Tube - P2S \/ X2D \/ A1 Series \/ P1 \/ X1 Series","description":"\u003ch2 data-start=\"87\" data-end=\"136\"\u003ePTFE Tube — Filament Guide \u0026amp; Low-Friction Feed\u003c\/h2\u003e\n\u003cp data-start=\"138\" data-end=\"334\"\u003eThe PTFE tube guides filament from the spool to the printer while reducing friction for smooth, reliable feeding. It’s a wear item and should be inspected regularly as part of routine maintenance.\u003c\/p\u003e\n\u003cp data-start=\"336\" data-end=\"545\"\u003eOver time, filament rubbing can wear the inner surface. Worn PTFE tubes can cause feeding resistance, misfeeds, or filament buildup—especially in AMS systems—so timely replacement helps prevent print failures.\u003c\/p\u003e\n\u003ch3 data-start=\"547\" data-end=\"562\"\u003eKey details\u003c\/h3\u003e\n\u003cp data-start=\"563\" data-end=\"699\"\u003e• Function: Reduces resistance and guides filament\u003cbr data-start=\"613\" data-end=\"616\"\u003e• Inner diameter: 2.5 mm\u003cbr data-start=\"640\" data-end=\"643\"\u003e• Outer diameter: 4 mm\u003cbr data-start=\"665\" data-end=\"668\"\u003e• Material: PTFE (low-friction)\u003c\/p\u003e\n\u003ch3 data-start=\"701\" data-end=\"722\"\u003eMaintenance notes\u003c\/h3\u003e\n\u003cp data-start=\"723\" data-end=\"978\"\u003e• PTFE tubes are consumables and will wear over time\u003cbr data-start=\"775\" data-end=\"778\"\u003e• Inspect during regular printer or AMS maintenance\u003cbr data-start=\"829\" data-end=\"832\"\u003e• Replace if you see abrasion, drag, deformation, or feeding issues\u003cbr data-start=\"899\" data-end=\"902\"\u003e• Worn tubes can lead to AMS jams or filament accumulation if left unchecked\u003c\/p\u003e\n\u003ch3 data-start=\"980\" data-end=\"999\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1000\" data-end=\"1145\"\u003eConsumable parts are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"4000mm*1 (AMS Hub\/Custom cut for all series) \/ White","offer_id":42003065208895,"sku":"FAT003","price":12.99,"currency_code":"CAD","in_stock":true},{"title":"4000mm*1 (AMS Hub\/Custom cut for all series) \/ Grey","offer_id":42003065241663,"sku":"FAT005","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/4b22ee5a-4mPTFE_1400x_f1583051-1bfc-4ece-952a-978f0cb93326.webp?v=1775556025"},{"product_id":"glue-stick-for-build-plate","title":"Glue Stick for Build Plate","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e A Bambu glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUser Guide\u003c\/strong\u003e Apply evenly to the cleaned build plate before printing and cover all print areas. Please wash the plate after printing has been completed. \u003cstrong\u003eNote\u003c\/strong\u003e \u003cem\u003eWARNING! CHOKING HAZARD. Please keep small parts away from children under 3 years old and stored in a cool and dry place.\u003c\/em\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003065274431,"sku":"SGL001","price":5.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/e37dd888-1_1400x-1.webp?v=1757004403"},{"product_id":"liquid-glue-for-build-plate","title":"Liquid Glue for Build Plate","description":"\u003cstrong\u003eOverview\u003c\/strong\u003e\r\n\r\nThe Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.\r\n\r\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\r\n\u003cul\u003e\r\n \t\u003cli\u003eExcellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.\u003c\/li\u003e\r\n \t\u003cli\u003eThe Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.\u003c\/li\u003e\r\n \t\u003cli\u003eCompared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface\u003c\/li\u003e\r\n \t\u003cli\u003eThe ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003065864255,"sku":"LGL001","price":21.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/7da98157-1834ea701b187eae9ad52a49fb604e5d_1400x_4adf34fa-1277-49cb-b221-d96a2b6f4259.webp?v=1757004403"},{"product_id":"bambu-lab-ams-2-pro-automatic-material-system","title":"Bambu Lab AMS 2 Pro - Automatic Material System","description":"\u003ch2\u003eBambu Lab AMS 2 Pro — Smarter Multi-Color, Integrated Drying\u003c\/h2\u003e\n\u003cp\u003eAMS 2 Pro is Bambu Lab’s advanced four-spool material system for reliable multi-color and multi-material printing. It improves filament handling, reduces tangles, and adds active drying support to keep filament in better condition during long or complex prints. Use one for everyday jobs, or connect multiple units with a hub to scale up.\u003c\/p\u003e\n\u003ch3\u003eWhy choose AMS 2 Pro\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003e4-spool automatic switching\u003c\/strong\u003e for color and material changes\u003cbr\u003e• \u003cstrong\u003eIntegrated drying capability\u003c\/strong\u003e with humidity-managed storage\u003cbr\u003e• \u003cstrong\u003eBuffered, low-tangle feeding\u003c\/strong\u003e for smoother swaps and cleaner purges\u003cbr\u003e• \u003cstrong\u003eQuieter, cleaner operation\u003c\/strong\u003e than earlier AMS generations\u003cbr\u003e• \u003cstrong\u003eRFID-enabled spools\u003c\/strong\u003e for automatic filament recognition\u003cbr\u003e• \u003cstrong\u003eExpandable\u003c\/strong\u003e — connect multiple units with a 4-port hub (up to 16 colors\/materials)\u003c\/p\u003e\n\u003ch3\u003eDrying note (important)\u003c\/h3\u003e\n\u003cp\u003e• Active drying \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003erequires the AMS 2 Pro Switching Power Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e• Some printer bundles include it; otherwise it is sold separately\u003cbr\u003e• Printing works without the adapter — drying does not\u003c\/p\u003e\n\u003ch3\u003eCompatibility (quick guide)\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eX1 \/ P1 \/ P2 series\u003c\/strong\u003e\u003cbr\u003e– One AMS 2 Pro: Filament Buffer\u003cbr\u003e– Multiple AMS units: 4-Port AMS Hub\u003cbr\u003e• \u003cstrong\u003eA1 \/ A1 Mini\u003c\/strong\u003e\u003cbr\u003e– Requires Filament Hub – A1 Series\u003cbr\u003e– Mixing AMS Lite with other AMS units on the same hub is not supported\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003e• Multi-color parts, labels, signage, and decorative prints\u003cbr\u003e• Multi-material jobs (rigid + flexible, support materials, etc.)\u003cbr\u003e• Print farms and production workflows needing low-touch automation\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• AMS 2 Pro unit (4-slot)\u003cbr\u003e• 6 PIN Connection cable and internal path components\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e(Filament Buffer, 4-Port AMS Hub, and Switching Power Adapter are sold separately unless bundled.)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003eAMS units, printers, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072352319,"sku":"SA007","price":349.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ams_3.jpg?v=1767373195"},{"product_id":"bambu-lab-ams-ht-automatic-material-system","title":"Bambu Lab AMS HT - Automatic Material System","description":"\u003ch2\u003eBambu Lab AMS HT — High-Temp Drying, Pro Material Handling\u003c\/h2\u003e\n\u003cp\u003eAMS HT is Bambu Lab’s high-temperature material system built for engineering filaments. It actively dries filament, keeps it sealed, and feeds it smoothly to the printer—reducing moisture issues, tangles, and failed prints when working with tougher materials.\u003c\/p\u003e\n\u003ch3\u003eWhy choose AMS HT\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh-temperature active drying\u003c\/strong\u003e to keep filament stable and print-ready\u003cbr\u003e• \u003cstrong\u003eSealed, humidity-controlled storage\u003c\/strong\u003e for consistent performance\u003cbr\u003e• \u003cstrong\u003eSmooth, buffered feeding\u003c\/strong\u003e for reliable material swaps\u003cbr\u003e• \u003cstrong\u003eRFID-enabled spools\u003c\/strong\u003e for automatic filament recognition\u003cbr\u003e• \u003cstrong\u003eExpandable system\u003c\/strong\u003e — connect multiple AMS units with a hub\u003c\/p\u003e\n\u003ch3\u003eCompatibility (quick guide)\u003c\/h3\u003e\n\u003cp\u003e• Works with Bambu Lab printers\u003cbr\u003e• \u003cstrong\u003eX1 \/ P1 \/ P2 \/ X1E series:\u003c\/strong\u003e\u003cbr\u003e– One unit: Filament Buffer\u003cbr\u003e– Multiple units: AMS Hub\u003cbr\u003e• \u003cstrong\u003eA1 \/ A1 Mini:\u003c\/strong\u003e requires Filament Hub – A1 Series\u003cbr\u003e• Not compatible with AMS Lite on the same hub\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003e• Nylon, PC, ASA, CF\/GF-filled filaments\u003cbr\u003e• Long prints where moisture consistency matters\u003cbr\u003e• Multi-material production, fixtures, and functional parts\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• AMS HT unit\u003cbr\u003e• Power and connection cables\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e• For best results, pair with enclosed printers and hardened nozzles\u003cbr\u003e• When using multiple AMS units, follow hub and routing guidelines\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003eAMS units, printers, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072385087,"sku":"SA008-US","price":169.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ams-2-1_f9e74322-3c24-433a-bc5f-f3b60a5e9c5b.jpg?v=1767373566"},{"product_id":"panda-cryogrip-frostbite-coarse-buildplate-a1-p1-x1","title":"Panda CryoGrip Frostbite (Coarse) Buildplate (A\/P\/X)","description":"\u003ch2\u003eBIQU CryoGrip Pro “Frostbite” Build Plate — A1 \/ P1 \/ P2 \/ X1\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCoarse Texture • Maximum Grip • Room-Temp Adhesion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CryoGrip Pro Frostbite plate is built for stubborn prints. Its coarse surface delivers aggressive first-layer grip that helps prevent warping on large, tall, or detail-heavy parts—often without bed heat. Print confidently, then flex to release when cool.\u003c\/p\u003e\n\u003ch3\u003eWhy choose Frostbite\u003c\/h3\u003e\n\u003cp\u003e• Extreme first-layer grip for warp-prone parts\u003cbr\u003e• Works well at room temperature in most setups\u003cbr\u003e• Ideal for large bases, sharp corners, and tall prints\u003cbr\u003e• Flexible spring steel — bend to release, no scraping\u003cbr\u003e• Durable multi-layer CryoGrip construction\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• Bambu Lab \u003cstrong\u003eA1 \/ P1 \/ P2 \/ X1 Series\u003c\/strong\u003e\u003cbr\u003e• Size: \u003cstrong\u003e257 × 257 mm\u003c\/strong\u003e\u003cbr\u003e• Uses the standard Bambu magnetic base\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• 1 × BIQU CryoGrip Pro Frostbite build plate (dual-sided)\u003c\/p\u003e\n\u003ch3\u003eUse \u0026amp; care\u003c\/h3\u003e\n\u003cp\u003e• Clean with \u003cstrong\u003eblue Dawn dish soap + hot water\u003c\/strong\u003e, towel dry\u003cbr\u003e• Avoid alcohols sharp tools, and solvents\u003cbr\u003e• Let the plate cool, then flex to remove parts\u003cbr\u003e• Store flat, clean, and dry\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e• Coarse texture will imprint on the bottom surface\u003cbr\u003e• Excellent for PLA, PETG, ASA, and other warp-sensitive materials\u003cbr\u003e• Designed for reliable adhesion in cool or unheated environments\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003eBuild plates are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072974911,"sku":"BQCRYOGRIP-FB","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/c8dd09d0-3010200040-CryoGrip_Pro_1000_2.webp?v=1757004427"},{"product_id":"bambu-high-flow-hotend-h2d","title":"Bambu High Flow Hotend - H2\/P2S\/X2D","description":"\u003ch2 data-start=\"150\" data-end=\"238\"\u003eBambu High-Flow Hotend (H2 \/ P2S) — Faster Extrusion, Bigger Nozzles, Less Print Time\u003c\/h2\u003e\n\u003cp data-start=\"240\" data-end=\"579\"\u003ePrint larger parts faster without sacrificing consistency. The Bambu High-Flow Hotend is optimized for higher melt throughput on \u003cstrong data-start=\"369\" data-end=\"390\"\u003eH2-series and P2S\u003c\/strong\u003e printers, making it ideal for thick layers, wide line widths, and strong functional parts. With Bambu’s quick-swap design, you can change hotends in minutes and keep downtime to a minimum.\u003c\/p\u003e\n\u003ch3 data-start=\"581\" data-end=\"616\"\u003eWhy choose the High-Flow Hotend\u003c\/h3\u003e\n\u003cp data-start=\"617\" data-end=\"889\"\u003e• Higher melt throughput for faster print speeds and thicker layers\u003cbr data-start=\"684\" data-end=\"687\"\u003e• Optimized for larger nozzles (0.6–0.8 mm) and high-volume extrusion\u003cbr data-start=\"756\" data-end=\"759\"\u003e• Stable thermal performance for consistent flow at speed\u003cbr data-start=\"816\" data-end=\"819\"\u003e• Quick-swap hotend design for easy maintenance and fast job changes\u003c\/p\u003e\n\u003ch3 data-start=\"891\" data-end=\"908\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"909\" data-end=\"1123\"\u003e• Printers: \u003cstrong data-start=\"921\" data-end=\"952\"\u003eBambu Lab P2S and H2 Series\u003c\/strong\u003e (H2D \/ H2S \/ H2D Pro)\u003cbr data-start=\"974\" data-end=\"977\"\u003e• Filament: 1.75 mm materials supported by your printer (PLA, PETG, TPU, etc.)\u003cbr data-start=\"1055\" data-end=\"1058\"\u003e• Abrasive filaments (CF\/GF): use a \u003cstrong data-start=\"1094\" data-end=\"1121\"\u003ehardened nozzle variant\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1125\" data-end=\"1150\"\u003eRecommended use cases\u003c\/h3\u003e\n\u003cp data-start=\"1151\" data-end=\"1355\"\u003e• Large models, enclosures, and shells\u003cbr data-start=\"1189\" data-end=\"1192\"\u003e• Jigs, fixtures, and functional shop parts\u003cbr data-start=\"1235\" data-end=\"1238\"\u003e• Fast draft prototypes and short production runs\u003cbr data-start=\"1287\" data-end=\"1290\"\u003e• Prints prioritizing strength and speed over ultra-fine detail\u003c\/p\u003e\n\u003ch3 data-start=\"1357\" data-end=\"1396\"\u003eAvailable nozzle sizes (by variant)\u003c\/h3\u003e\n\u003cp data-start=\"1397\" data-end=\"1560\"\u003e• 0.4 mm — balanced detail and speed\u003cbr data-start=\"1433\" data-end=\"1436\"\u003e• 0.6 mm — ideal high-flow performance for most fast prints\u003cbr data-start=\"1495\" data-end=\"1498\"\u003e• 0.8 mm — maximum throughput, thick walls, and rapid infill\u003c\/p\u003e\n\u003ch3 data-start=\"1562\" data-end=\"1586\"\u003eInstall \u0026amp; setup tips\u003c\/h3\u003e\n\u003cp data-start=\"1587\" data-end=\"1905\"\u003e• Power off the printer and allow the hotend to cool fully before swapping\u003cbr data-start=\"1661\" data-end=\"1664\"\u003e• Seat the hotend firmly and route cables\/PTFE exactly as shown for your machine\u003cbr data-start=\"1744\" data-end=\"1747\"\u003e• Run flow calibration and first-layer leveling after installation\u003cbr data-start=\"1813\" data-end=\"1816\"\u003e• Increase line width and layer height (≈0.32–0.40 mm+) to fully benefit from high flow\u003c\/p\u003e\n\u003ch3 data-start=\"1907\" data-end=\"1945\"\u003ePrinting tips for speed \u0026amp; strength\u003c\/h3\u003e\n\u003cp data-start=\"1946\" data-end=\"2184\"\u003e• Use slightly higher nozzle temperatures within your filament’s safe range\u003cbr data-start=\"2021\" data-end=\"2024\"\u003e• Increase wall and infill speeds gradually while monitoring extrusion consistency\u003cbr data-start=\"2106\" data-end=\"2109\"\u003e• Tune cooling carefully—especially with PETG or TPU at higher flow rates\u003c\/p\u003e\n\u003ch3 data-start=\"2186\" data-end=\"2214\"\u003eWhen to replace a hotend\u003c\/h3\u003e\n\u003cp data-start=\"2215\" data-end=\"2406\"\u003e• Repeated clogs or reduced flow that normal cleaning won’t fix\u003cbr data-start=\"2278\" data-end=\"2281\"\u003e• Worn or damaged nozzle affecting surface quality\u003cbr data-start=\"2331\" data-end=\"2334\"\u003e• Frequent switching between fine-detail and high-throughput workflows\u003c\/p\u003e\n\u003ch3 data-start=\"2408\" data-end=\"2429\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"2430\" data-end=\"2583\"\u003e• Bambu High-Flow hotend assembly with pre-installed nozzle\u003cbr data-start=\"2489\" data-end=\"2492\"\u003e• Integrated heater and temperature sensor (per variant)\u003cbr data-start=\"2548\" data-end=\"2551\"\u003e• Basic installation materials\u003c\/p\u003e\n\u003ch3 data-start=\"2585\" data-end=\"2604\"\u003eSpecs (summary)\u003c\/h3\u003e\n\u003cp data-start=\"2605\" data-end=\"2813\"\u003e• Filament diameter: 1.75 mm\u003cbr data-start=\"2633\" data-end=\"2636\"\u003e• Nozzle: size varies by selection\u003cbr data-start=\"2670\" data-end=\"2673\"\u003e• Temperature: supports the rated temperature range of your printer\u003cbr data-start=\"2740\" data-end=\"2743\"\u003e• Maintenance: periodic cold pulls and nozzle inspection recommended\u003c\/p\u003e\n\u003ch3 data-start=\"2815\" data-end=\"2834\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2835\" data-end=\"2992\"\u003eHotends and nozzles are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.4mm Hardened Steel","offer_id":42003074678847,"sku":"FAH063 \/ FAH030","price":69.0,"currency_code":"CAD","in_stock":true},{"title":"0.6mm Hardened Steel","offer_id":42003074711615,"sku":"FAH064 \/ FAH031","price":69.0,"currency_code":"CAD","in_stock":true},{"title":"0.8mm Hardened Steel","offer_id":42790027886655,"sku":"FAH065","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5486ce32-HF_Hotend.png?v=1757004437"},{"product_id":"panda-cryogrip-glacier-smooth-buildplate-a1-p1-x1","title":"Panda CryoGrip Glacier (Smooth) Buildplate (A\/P\/X)","description":"\u003ch2 data-start=\"139\" data-end=\"202\"\u003ePanda CryoGrip Glacier (Smooth) Build Plate — A1 \/ P1 \/ P2 \/ X1\u003c\/h2\u003e\n\u003cp data-start=\"203\" data-end=\"251\"\u003eSmooth Finish • Room-Temp Grip • Flex-to-Release\u003c\/p\u003e\n\u003cp data-start=\"253\" data-end=\"578\"\u003eThe CryoGrip Glacier (Smooth) build plate delivers a \u003cstrong data-start=\"306\" data-end=\"339\"\u003eclean, refined bottom surface\u003c\/strong\u003e with reliable first-layer adhesion—often at room temperature. Designed for A1, P1, P2, and X1 series printers, its double-sided, multi-layer construction keeps parts secure during printing, then releases easily with a simple flex once cooled.\u003c\/p\u003e\n\u003ch3 data-start=\"580\" data-end=\"611\"\u003eWhy choose Glacier (Smooth)\u003c\/h3\u003e\n\u003cp data-start=\"612\" data-end=\"992\"\u003e• Smooth, refined bottom finish that looks complete straight off the bed\u003cbr data-start=\"684\" data-end=\"687\"\u003e• Strong room-temperature adhesion for PLA, PETG, and TPU (add heat only if needed)\u003cbr data-start=\"770\" data-end=\"773\"\u003e• Flex-to-release design—bend the plate to pop parts free with minimal effort\u003cbr data-start=\"850\" data-end=\"853\"\u003e• Energy-efficient workflow: reduce or eliminate bed heat on suitable prints\u003cbr data-start=\"929\" data-end=\"932\"\u003e• Durable, double-sided construction for long service life\u003c\/p\u003e\n\u003ch3 data-start=\"994\" data-end=\"1006\"\u003eBest for\u003c\/h3\u003e\n\u003cp data-start=\"1007\" data-end=\"1145\"\u003e• PLA, PETG, TPU, and other everyday filaments\u003cbr data-start=\"1053\" data-end=\"1056\"\u003e• Display models, cosplay shells, organizers, and functional parts needing a clean base\u003c\/p\u003e\n\u003ch3 data-start=\"1147\" data-end=\"1164\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"1165\" data-end=\"1318\"\u003e• Bambu Lab A1\u003cbr data-start=\"1189\" data-end=\"1192\"\u003e• Bambu Lab P1P \/ P1S \/ P2S\u003cbr data-start=\"1213\" data-end=\"1216\"\u003e• Bambu Lab X1 \/ X1 Carbon \/ X1E\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1320\" data-end=\"1341\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1342\" data-end=\"1402\"\u003e• Panda CryoGrip Glacier (Smooth) build plate (double-sided)\u003c\/p\u003e\n\u003ch3 data-start=\"1404\" data-end=\"1424\"\u003eSetup \u0026amp; use tips\u003c\/h3\u003e\n\u003cp data-start=\"1425\" data-end=\"1783\"\u003e• Place on a clean magnetic base with the Glacier side facing up\u003cbr data-start=\"1489\" data-end=\"1492\"\u003e• Run bed leveling before first use\u003cbr data-start=\"1527\" data-end=\"1530\"\u003e• PLA\/TPU often print unheated; increase bed temperature gradually for PETG if required\u003cbr data-start=\"1617\" data-end=\"1620\"\u003e• Allow prints to cool slightly, then flex the plate to release\u003cbr data-start=\"1683\" data-end=\"1686\"\u003e• If adhesion is excessive, reduce first-layer squish or slightly lower bed\/nozzle temperatures\u003c\/p\u003e\n\u003ch3 data-start=\"1785\" data-end=\"1807\"\u003eCare \u0026amp; maintenance\u003c\/h3\u003e\n\u003cp data-start=\"1808\" data-end=\"1990\"\u003e• Clean using \u003cstrong data-start=\"1822\" data-end=\"1857\"\u003eblue Dawn dish soap + hot water\u003c\/strong\u003e, then towel dry thoroughly\u003cbr data-start=\"1884\" data-end=\"1887\"\u003e• Avoid scrapers, abrasives, or sharp tools\u003cbr data-start=\"1930\" data-end=\"1933\"\u003e• Do not use harsh solvents that may damage the surface\u003c\/p\u003e\n\u003ch3 data-start=\"1992\" data-end=\"2001\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"2002\" data-end=\"2169\"\u003e• For maximum grip on large or warp-prone parts, choose CryoGrip Frostbite (Coarse)\u003cbr data-start=\"2085\" data-end=\"2088\"\u003e• Engineering filaments may still require bed heat or a different build surface\u003c\/p\u003e\n\u003ch3 data-start=\"2171\" data-end=\"2190\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2191\" data-end=\"2342\"\u003eBuild plates and accessories are final sale. Any approved return must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/CryoGrip_Pro_Frostbite_EN_20250701.jpg?v=1751353279\" alt=\"\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003074744383,"sku":"BQCRYOGRIP-GL","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5fac9690-2_4423883f-8590-46c3-9a31-af2beafa7f73.webp?v=1757004437"},{"product_id":"hotend-with-nozzle-h2d","title":"Bambu Hotend - P2S \/ X2D \/ H2 Series","description":"\u003ch2 data-start=\"110\" data-end=\"193\"\u003eBambu Hotend (H2 \/ P2S) — Quick-Swap Precision for Everyday \u0026amp; Engineering Prints\u003c\/h2\u003e\n\u003cp data-start=\"195\" data-end=\"528\"\u003eKeep your printer performing at its peak with the official Bambu Lab hotend for H2-series and P2S platforms. Designed for fast swaps and stable thermal performance, this factory hotend delivers clean extrusion, sharp detail, and dependable flow across a wide range of materials—from quick PLA prototypes to tougher, functional parts.\u003c\/p\u003e\n\u003ch3 data-start=\"530\" data-end=\"556\"\u003eWhy choose this hotend\u003c\/h3\u003e\n\u003cp data-start=\"557\" data-end=\"889\"\u003e• \u003cstrong data-start=\"559\" data-end=\"580\"\u003eQuick-swap design\u003c\/strong\u003e for fast nozzle or hotend changes with minimal downtime\u003cbr data-start=\"636\" data-end=\"639\"\u003e• \u003cstrong data-start=\"641\" data-end=\"678\"\u003eFactory-tuned thermal performance\u003c\/strong\u003e for consistent extrusion and reliable layer bonding\u003cbr data-start=\"730\" data-end=\"733\"\u003e• \u003cstrong data-start=\"735\" data-end=\"767\"\u003eClean surfaces \u0026amp; sharp edges\u003c\/strong\u003e thanks to an optimized melt zone and flow path\u003cbr data-start=\"814\" data-end=\"817\"\u003e• \u003cstrong data-start=\"819\" data-end=\"848\"\u003eService-friendly assembly\u003c\/strong\u003e—prebuilt to reduce installation errors\u003c\/p\u003e\n\u003ch3 data-start=\"891\" data-end=\"908\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"909\" data-end=\"1161\"\u003e• \u003cstrong data-start=\"911\" data-end=\"924\"\u003ePrinters:\u003c\/strong\u003e P2S and H2-series machines (including H2D, H2S, H2D Pro)\u003cbr data-start=\"981\" data-end=\"984\"\u003e• \u003cstrong data-start=\"986\" data-end=\"1008\"\u003eFilament diameter:\u003c\/strong\u003e 1.75 mm\u003cbr data-start=\"1016\" data-end=\"1019\"\u003e• Select the correct variant for your printer model and nozzle size\u003cbr data-start=\"1086\" data-end=\"1089\"\u003e• For abrasive materials (CF\/GF-filled), use a hardened nozzle variant\u003c\/p\u003e\n\u003ch3 data-start=\"1163\" data-end=\"1202\"\u003eAvailable nozzle sizes (by variant)\u003c\/h3\u003e\n\u003cp data-start=\"1203\" data-end=\"1391\"\u003e• \u003cstrong data-start=\"1205\" data-end=\"1215\"\u003e0.2 mm\u003c\/strong\u003e – maximum detail and fine features\u003cbr data-start=\"1250\" data-end=\"1253\"\u003e• \u003cstrong data-start=\"1255\" data-end=\"1265\"\u003e0.4 mm\u003c\/strong\u003e – balanced quality and speed (most common choice)\u003cbr data-start=\"1315\" data-end=\"1318\"\u003e• \u003cstrong data-start=\"1320\" data-end=\"1339\"\u003e0.6 mm \/ 0.8 mm\u003c\/strong\u003e – higher flow, stronger walls, faster large parts\u003c\/p\u003e\n\u003ch3 data-start=\"1393\" data-end=\"1414\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1415\" data-end=\"1561\"\u003e• Complete hotend assembly with pre-installed nozzle\u003cbr data-start=\"1467\" data-end=\"1470\"\u003e• Integrated heater and temperature sensor (per variant)\u003cbr data-start=\"1526\" data-end=\"1529\"\u003e• Required mounting components\u003c\/p\u003e\n\u003ch3 data-start=\"1563\" data-end=\"1591\"\u003eInstallation \u0026amp; care tips\u003c\/h3\u003e\n\u003cp data-start=\"1592\" data-end=\"1863\"\u003e• Power off and allow the printer to fully cool before swapping\u003cbr data-start=\"1655\" data-end=\"1658\"\u003e• Seat the hotend firmly and route cables\/PTFE exactly as specified\u003cbr data-start=\"1725\" data-end=\"1728\"\u003e• Run nozzle, flow, and bed calibration after installation\u003cbr data-start=\"1786\" data-end=\"1789\"\u003e• Inspect nozzle wear regularly when printing fiber-reinforced filaments\u003c\/p\u003e\n\u003ch3 data-start=\"1865\" data-end=\"1893\"\u003eWhen to replace a hotend\u003c\/h3\u003e\n\u003cp data-start=\"1894\" data-end=\"2144\"\u003e• Repeated clogs or inconsistent extrusion after normal maintenance\u003cbr data-start=\"1961\" data-end=\"1964\"\u003e• Visible nozzle damage or excessive wear\u003cbr data-start=\"2005\" data-end=\"2008\"\u003e• Persistent surface defects not resolved through calibration\u003cbr data-start=\"2069\" data-end=\"2072\"\u003e• Frequent switching between fine-detail and high-flow printing setups\u003c\/p\u003e\n\u003ch3 data-start=\"2146\" data-end=\"2165\"\u003eSpecs (summary)\u003c\/h3\u003e\n\u003cp data-start=\"2166\" data-end=\"2363\"\u003e• Filament: 1.75 mm\u003cbr data-start=\"2185\" data-end=\"2188\"\u003e• Nozzle size: per selected variant\u003cbr data-start=\"2223\" data-end=\"2226\"\u003e• Temperature capability: matches supported range of the printer\u003cbr data-start=\"2290\" data-end=\"2293\"\u003e• Maintenance: periodic cold pulls and nozzle inspection recommended\u003c\/p\u003e\n\u003ch3 data-start=\"2365\" data-end=\"2384\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2385\" data-end=\"2542\"\u003eHotends and nozzles are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.4mm Hardened Steel","offer_id":42003148013631,"sku":"FAH060 \/ FAH023","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"0.6mm Hardened Steel","offer_id":42003148046399,"sku":"FAH061 \/ FAH024","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"0.8mm Hardened Steel","offer_id":42003148079167,"sku":"FAH062 \/ FAH025","price":24.99,"currency_code":"CAD","in_stock":false},{"title":"0.2mm Stainless Steel","offer_id":42003148111935,"sku":"FAH059 \/ FAH026","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAH023.png?v=1757006947"},{"product_id":"biqu-panda-cushion-xp-shock-absorbing-feet","title":"BIQU Panda Cushion XP Shock Absorbing Feet","description":"\u003cdiv class=\"cw-intro\"\u003e\u003cp\u003eBIQU Panda Cushion XP feet replace the stock rubber feet under a Bambu Lab P1P, P1S, P2S, X2D, X1C or X1E. Each foot combines a large bearing ball with multi-layer damping, so it soaks up the shaking of fast prints while still holding the printer firmly against sliding. Less vibration into the desk means less noise, less resonance rattling the frame and cleaner walls on your prints, especially on a lightweight table. Set of feet for one printer; installs by swapping the originals, no drilling. Winnipeg pickup or Canada-wide shipping from Convoy-Westcan.\u003c\/p\u003e\u003c\/div\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42920342061119,"sku":"BQFEET","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/lQDPKHwyVUVxZCnNA-jNA-iwSSObIRNQMvUIrvIJfPohAA_1000_1000.webp?v=1770790101"},{"product_id":"panda-cryogrip-frostbite-coarse-buildplate-a1-p1-x1-orange","title":"Panda CryoGrip Frostbite (Coarse) Buildplate (A\/P\/X) ORANGE","description":"\u003ch2 data-end=\"167\" data-start=\"103\"\u003eBIQU CryoGrip Pro “Frostbite” Build Plate — A1 \/ P1 \/ P2 \/ X1\u003c\/h2\u003e\n\u003cp data-end=\"229\" data-start=\"169\"\u003e\u003cstrong data-end=\"229\" data-start=\"169\"\u003eCoarse Texture • Maximum Grip • Room-Temp Adhesion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"495\" data-start=\"231\"\u003eThe CryoGrip Pro Frostbite plate is built for stubborn prints. Its coarse surface delivers aggressive first-layer grip that helps prevent warping on large, tall, or detail-heavy parts—often without bed heat. Print confidently, then flex to release when cool.\u003c\/p\u003e\n\u003ch3 data-end=\"521\" data-start=\"497\"\u003eWhy choose Frostbite\u003c\/h3\u003e\n\u003cp data-end=\"782\" data-start=\"522\"\u003e• Extreme first-layer grip for warp-prone parts\u003cbr data-end=\"572\" data-start=\"569\"\u003e• Works well at room temperature in most setups\u003cbr data-end=\"622\" data-start=\"619\"\u003e• Ideal for large bases, sharp corners, and tall prints\u003cbr data-end=\"680\" data-start=\"677\"\u003e• Flexible spring steel — bend to release, no scraping\u003cbr data-end=\"737\" data-start=\"734\"\u003e• Durable multi-layer CryoGrip construction\u003c\/p\u003e\n\u003ch3 data-end=\"801\" data-start=\"784\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-end=\"913\" data-start=\"802\"\u003e• Bambu Lab \u003cstrong data-end=\"842\" data-start=\"814\"\u003eA1 \/ P1 \/ P2 \/ X1 Series\u003c\/strong\u003e\u003cbr data-end=\"845\" data-start=\"842\"\u003e• Size: \u003cstrong data-end=\"869\" data-start=\"853\"\u003e257 × 257 mm\u003c\/strong\u003e\u003cbr data-end=\"872\" data-start=\"869\"\u003e• Uses the standard Bambu magnetic base\u003c\/p\u003e\n\u003ch3 data-end=\"936\" data-start=\"915\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-end=\"995\" data-start=\"937\"\u003e• 1 × \u003cstrong\u003eORANGE\u003c\/strong\u003e BIQU CryoGrip Pro Frostbite build plate (dual-sided)\u003c\/p\u003e\n\u003ch3 data-end=\"1011\" data-start=\"997\"\u003eUse \u0026amp; care\u003c\/h3\u003e\n\u003cp data-end=\"1186\" data-start=\"1012\"\u003e• Clean with \u003cstrong data-end=\"1060\" data-start=\"1025\"\u003eblue Dawn dish soap + hot water\u003c\/strong\u003e, towel dry\u003cbr data-end=\"1074\" data-start=\"1071\"\u003e• Avoid alcohols sharp tools, and solvents\u003cbr data-end=\"1106\" data-start=\"1103\"\u003e• Let the plate cool, then flex to remove parts\u003cbr data-end=\"1156\" data-start=\"1153\"\u003e• Store flat, clean, and dry\u003c\/p\u003e\n\u003ch3 data-end=\"1197\" data-start=\"1188\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-end=\"1476\" data-start=\"1198\"\u003e• Coarse texture will imprint on the bottom surface\u003cbr data-end=\"1252\" data-start=\"1249\"\u003e• Excellent for PLA, PETG, ASA, and other warp-sensitive materials\u003cbr data-end=\"1321\" data-start=\"1318\"\u003e• Designed for reliable adhesion in cool or unheated environments\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"1525\" data-start=\"1478\"\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp data-end=\"1663\" data-start=\"1526\"\u003e• Same-day or next-business-day dispatch when in stock\u003cbr data-end=\"1583\" data-start=\"1580\"\u003e• Free local courier on eligible orders over $60\u003cbr data-end=\"1634\" data-start=\"1631\"\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp data-end=\"1828\" data-start=\"1665\"\u003e\u003cstrong data-end=\"1684\" data-start=\"1665\"\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr data-end=\"1687\" data-start=\"1684\"\u003eBuild plates are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42920521564223,"sku":"BQCRYOGRIP-FB-ORG","price":35.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3010200086-Frostbite_A1P1X1_1.webp?v=1770795942"},{"product_id":"tpu-feed-assist-module","title":"TPU Feed Assist Module","description":"\u003ch1 data-section-id=\"1lghuyw\" data-start=\"171\" data-end=\"236\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"173\" data-end=\"236\"\u003eBambu TPU Feed Assist Module — Smooth, Reliable TPU Feeding\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"238\" data-end=\"283\"\u003eConsistent Feed • Fewer Jams • Flexible Setup\u003c\/p\u003e\n\u003chr data-start=\"285\" data-end=\"288\"\u003e\n\u003ch2 data-section-id=\"rzkdgm\" data-start=\"290\" data-end=\"301\"\u003eOverview\u003c\/h2\u003e\n\u003cp data-start=\"303\" data-end=\"574\"\u003eThe Bambu TPU Feed Assist Module is designed to eliminate one of the biggest challenges in TPU printing—unreliable filament feeding. By actively assisting the filament path, it reduces drag, improves consistency, and helps prevent slipping, grinding, and under-extrusion.\u003c\/p\u003e\n\u003cp data-start=\"576\" data-end=\"711\"\u003eIt’s especially useful when running TPU from external holders, dry boxes, or longer feed paths where resistance can cause print issues.\u003c\/p\u003e\n\u003chr data-start=\"713\" data-end=\"716\"\u003e\n\u003ch2 data-section-id=\"1vknjep\" data-start=\"718\" data-end=\"758\"\u003eWhy choose the TPU Feed Assist Module\u003c\/h2\u003e\n\u003cp data-start=\"760\" data-end=\"1156\"\u003e• Reliable TPU feeding: Reduces slipping and inconsistent extrusion\u003cbr data-start=\"827\" data-end=\"830\"\u003e• Fewer jams: Stabilizes filament path for smoother operation\u003cbr data-start=\"891\" data-end=\"894\"\u003e• Better print quality: Helps eliminate under-extrusion and flow issues\u003cbr data-start=\"965\" data-end=\"968\"\u003e• Flexible setup: Works with side-mounted or external spool holders\u003cbr data-start=\"1035\" data-end=\"1038\"\u003e• Ideal for soft TPU: Especially useful for 85A and softer materials\u003cbr data-start=\"1106\" data-end=\"1109\"\u003e• Works across multiple models (not H2D-only)\u003c\/p\u003e\n\u003chr data-start=\"1158\" data-end=\"1161\"\u003e\n\u003ch2 data-section-id=\"1rbt86j\" data-start=\"1163\" data-end=\"1214\"\u003ePair it with the TPU High-Flow Kit (Recommended)\u003c\/h2\u003e\n\u003cp data-start=\"1216\" data-end=\"1285\"\u003eFor best TPU performance, combine with the \u003cstrong data-start=\"1259\" data-end=\"1284\"\u003eH2D TPU High-Flow Kit\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"1287\" data-end=\"1388\"\u003e• Feed Assist → improves filament delivery\u003cbr data-start=\"1329\" data-end=\"1332\"\u003e• High-Flow Hotend → improves extrusion speed and flow\u003c\/p\u003e\n\u003cp data-start=\"1390\" data-end=\"1475\"\u003e👉 Together they provide \u003cstrong data-start=\"1415\" data-end=\"1475\"\u003efaster, more consistent TPU printing with fewer failures\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"1477\" data-end=\"1480\"\u003e\n\u003ch2 data-section-id=\"7rkfek\" data-start=\"1482\" data-end=\"1527\"\u003eImportant limitations (read before buying)\u003c\/h2\u003e\n\u003cp data-start=\"1529\" data-end=\"1891\"\u003e• Assembly required: Housing and frame must be 3D printed before use\u003cbr data-start=\"1597\" data-end=\"1600\"\u003e• External spool required: AMS auto loading\/unloading is not supported\u003cbr data-start=\"1670\" data-end=\"1673\"\u003e• AMS HT workaround: Can feed through AMS HT TPU outlet for dry storage\u003cbr data-start=\"1744\" data-end=\"1747\"\u003e• Dual hotend limitation:\u003cbr data-start=\"1772\" data-end=\"1775\"\u003e– Right side install → left nozzle works normally\u003cbr data-start=\"1826\" data-end=\"1829\"\u003e– Left side install → dual-nozzle printing not recommended\u003c\/p\u003e\n\u003chr data-start=\"1893\" data-end=\"1896\"\u003e\n\u003ch2 data-section-id=\"1bhz8pj\" data-start=\"1898\" data-end=\"1918\"\u003eRecommended setup\u003c\/h2\u003e\n\u003cp data-start=\"1920\" data-end=\"2091\"\u003e• Use with external spool holder or dry box\u003cbr data-start=\"1963\" data-end=\"1966\"\u003e• Keep TPU dry (critical for print quality)\u003cbr data-start=\"2009\" data-end=\"2012\"\u003e• Minimize sharp bends in PTFE path\u003cbr data-start=\"2047\" data-end=\"2050\"\u003e• Best results with Bambu TPU filaments\u003c\/p\u003e\n\u003chr data-start=\"2093\" data-end=\"2096\"\u003e\n\u003ch2 data-section-id=\"znyway\" data-start=\"2098\" data-end=\"2114\"\u003ePrinting tips\u003c\/h2\u003e\n\u003cp data-start=\"2116\" data-end=\"2336\"\u003e• Shorter, smoother filament paths = better results\u003cbr data-start=\"2167\" data-end=\"2170\"\u003e• Combine with slower retraction settings for soft TPU\u003cbr data-start=\"2224\" data-end=\"2227\"\u003e• Ideal for long-duration or repeat TPU prints\u003cbr data-start=\"2273\" data-end=\"2276\"\u003e• Helps stabilize feeding on flexible or elastic materials\u003c\/p\u003e\n\u003chr data-start=\"2338\" data-end=\"2341\"\u003e\n\u003ch2 data-section-id=\"i8yokb\" data-start=\"2343\" data-end=\"2363\"\u003eTypical use cases\u003c\/h2\u003e\n\u003cp data-start=\"2365\" data-end=\"2558\"\u003e• Consistent TPU production printing\u003cbr data-start=\"2401\" data-end=\"2404\"\u003e• Soft TPU (85A–90A) where feeding issues are common\u003cbr data-start=\"2456\" data-end=\"2459\"\u003e• Dry box setups or remote spool placement\u003cbr data-start=\"2501\" data-end=\"2504\"\u003e• Reducing failed prints due to feed inconsistencies\u003c\/p\u003e\n\u003chr data-start=\"2560\" data-end=\"2563\"\u003e\n\u003ch2 data-section-id=\"14bu82z\" data-start=\"2565\" data-end=\"2581\"\u003eCompatibility\u003c\/h2\u003e\n\u003cp data-start=\"2583\" data-end=\"2672\"\u003e• Bambu Lab H2 Series\u003cbr data-start=\"2604\" data-end=\"2607\"\u003e• Bambu Lab X1 Series\u003cbr data-start=\"2628\" data-end=\"2631\"\u003e• Bambu Lab P1 Series\u003cbr data-start=\"2652\" data-end=\"2655\"\u003e• Bambu Lab P2S\u003c\/p\u003e\n\u003chr data-start=\"2674\" data-end=\"2677\"\u003e\n\u003ch2 data-section-id=\"9rzg0e\" data-start=\"2679\" data-end=\"2699\"\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cp data-start=\"2701\" data-end=\"2830\"\u003e• Extruder components ×1\u003cbr data-start=\"2725\" data-end=\"2728\"\u003e• Main control board ×1\u003cbr data-start=\"2751\" data-end=\"2754\"\u003e• PTFE tubes ×2\u003cbr data-start=\"2769\" data-end=\"2772\"\u003e• Connectors and cables\u003cbr data-start=\"2795\" data-end=\"2798\"\u003e• Mounting hardware and screws\u003c\/p\u003e\n\u003cp data-start=\"2832\" data-end=\"2883\"\u003e\u003cem data-start=\"2832\" data-end=\"2883\"\u003ePrinted housing and frame required (not included)\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-start=\"2885\" data-end=\"2888\"\u003e\n\u003ch2 data-section-id=\"cb2lgp\" data-start=\"2890\" data-end=\"2908\"\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp data-start=\"2910\" data-end=\"3013\"\u003eParts and consumables are final sale once installed or assembled. Ensure compatibility before purchase.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43042507718719,"sku":"FAC234","price":70.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/SLA.png?v=1774414219"},{"product_id":"tungsten-carbide-nozzle-h2-p2s","title":"Tungsten Carbide Nozzle - H2\/P2S\/X2D","description":"\u003ch1 data-section-id=\"mf6jq1\" data-start=\"241\" data-end=\"287\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"243\" data-end=\"287\"\u003eBambu Tungsten Carbide Nozzle — H2 \/ P2S\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"289\" data-end=\"362\"\u003eExtreme Wear Resistance • High-Speed Ready • Built for Abrasive Filaments\u003c\/p\u003e\n\u003chr data-start=\"364\" data-end=\"367\"\u003e\n\u003ch2 data-section-id=\"rzkdgm\" data-start=\"369\" data-end=\"380\"\u003eOverview\u003c\/h2\u003e\n\u003cp data-start=\"382\" data-end=\"547\"\u003eThe Bambu Tungsten Carbide Nozzle is a premium, long-life upgrade designed for printing abrasive and high-performance filaments without constant wear or degradation.\u003c\/p\u003e\n\u003cp data-start=\"549\" data-end=\"761\"\u003eWith \u003cstrong data-start=\"554\" data-end=\"601\"\u003eHRA 90 hardness (far beyond hardened steel)\u003c\/strong\u003e, these nozzles deliver significantly longer lifespan, consistent extrusion, and reliable performance—even with carbon fiber, glass fiber, and filled materials.\u003c\/p\u003e\n\u003cp data-start=\"763\" data-end=\"938\"\u003eAvailable in \u003cstrong data-start=\"776\" data-end=\"816\"\u003eStandard Flow and High Flow variants\u003c\/strong\u003e, you can choose between precision-focused printing or maximum speed and throughput. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-start=\"940\" data-end=\"943\"\u003e\n\u003ch2 data-section-id=\"1d7tphx\" data-start=\"945\" data-end=\"974\"\u003eStandard Flow vs High Flow\u003c\/h2\u003e\n\u003cp data-start=\"976\" data-end=\"1140\"\u003e• \u003cstrong data-start=\"978\" data-end=\"995\"\u003eStandard Flow\u003c\/strong\u003e → Maximum consistency, best for detail and everyday printing\u003cbr data-start=\"1056\" data-end=\"1059\"\u003e• \u003cstrong data-start=\"1061\" data-end=\"1074\"\u003eHigh Flow\u003c\/strong\u003e → Higher throughput, faster print speeds, better for production\u003c\/p\u003e\n\u003cp data-start=\"1142\" data-end=\"1201\"\u003e👉 Same durability — choose based on \u003cstrong data-start=\"1179\" data-end=\"1201\"\u003espeed vs precision\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"1203\" data-end=\"1206\"\u003e\n\u003ch2 data-section-id=\"66az34\" data-start=\"1208\" data-end=\"1238\"\u003eWhy choose Tungsten Carbide\u003c\/h2\u003e\n\u003cp data-start=\"1240\" data-end=\"1560\"\u003e• Extreme durability: Significantly longer lifespan vs hardened steel\u003cbr data-start=\"1309\" data-end=\"1312\"\u003e• Abrasive-ready: Handles CF, GF, glow, and filled filaments\u003cbr data-start=\"1372\" data-end=\"1375\"\u003e• Consistent extrusion: Maintains accuracy over time (less wear = better prints)\u003cbr data-start=\"1455\" data-end=\"1458\"\u003e• High temperature capable: Up to 350 °C\u003cbr data-start=\"1498\" data-end=\"1501\"\u003e• Lower maintenance: Fewer nozzle swaps and recalibration\u003c\/p\u003e\n\u003chr data-start=\"1562\" data-end=\"1565\"\u003e\n\u003ch2 data-section-id=\"ardopp\" data-start=\"1567\" data-end=\"1605\"\u003eNozzle size guide (quick reference)\u003c\/h2\u003e\n\u003cp data-start=\"1607\" data-end=\"1702\"\u003e0.4 mm\u003cbr data-start=\"1613\" data-end=\"1616\"\u003e• Best balance of detail and strength\u003cbr data-start=\"1653\" data-end=\"1656\"\u003e• Ideal for general use and functional parts\u003c\/p\u003e\n\u003cp data-start=\"1704\" data-end=\"1809\"\u003e0.6 mm\u003cbr data-start=\"1710\" data-end=\"1713\"\u003e• Faster printing with strong layer bonding\u003cbr data-start=\"1756\" data-end=\"1759\"\u003e• Great for engineering materials and production\u003c\/p\u003e\n\u003cp data-start=\"1811\" data-end=\"1901\"\u003e0.8 mm\u003cbr data-start=\"1817\" data-end=\"1820\"\u003e• Maximum flow and strength\u003cbr data-start=\"1847\" data-end=\"1850\"\u003e• Best for large, structural, or industrial parts\u003c\/p\u003e\n\u003chr data-start=\"1903\" data-end=\"1906\"\u003e\n\u003ch2 data-section-id=\"8r5e29\" data-start=\"1908\" data-end=\"1933\"\u003eNozzle size comparison\u003c\/h2\u003e\n\u003cp data-start=\"1935\" data-end=\"2078\"\u003eNozzle Size: 0.4 mm\u003cbr data-start=\"1954\" data-end=\"1957\"\u003eBest for: Everyday prints, detail, balanced performance\u003cbr data-start=\"2012\" data-end=\"2015\"\u003eCommon uses: Toys, brackets, mechanical parts, general prints\u003c\/p\u003e\n\u003cp data-start=\"2080\" data-end=\"2212\"\u003eNozzle Size: 0.6 mm\u003cbr data-start=\"2099\" data-end=\"2102\"\u003eBest for: Faster prints with strong parts\u003cbr data-start=\"2143\" data-end=\"2146\"\u003eCommon uses: Functional parts, larger models, engineering prints\u003c\/p\u003e\n\u003cp data-start=\"2214\" data-end=\"2337\"\u003eNozzle Size: 0.8 mm\u003cbr data-start=\"2233\" data-end=\"2236\"\u003eBest for: Maximum strength and speed\u003cbr data-start=\"2272\" data-end=\"2275\"\u003eCommon uses: Large structural parts, industrial applications\u003c\/p\u003e\n\u003chr data-start=\"2339\" data-end=\"2342\"\u003e\n\u003ch2 data-section-id=\"g52eea\" data-start=\"2344\" data-end=\"2382\"\u003eMaterial compatibility (highlights)\u003c\/h2\u003e\n\u003cp data-start=\"2384\" data-end=\"2410\"\u003eWorks extremely well with:\u003c\/p\u003e\n\u003cp data-start=\"2412\" data-end=\"2586\"\u003e• Carbon fiber (PLA-CF, PETG-CF, PA-CF, etc.)\u003cbr data-start=\"2457\" data-end=\"2460\"\u003e• Glass fiber materials (PA6-GF, ABS-GF)\u003cbr data-start=\"2500\" data-end=\"2503\"\u003e• Glow, sparkle, metal, and filled filaments\u003cbr data-start=\"2547\" data-end=\"2550\"\u003e• Standard PLA, PETG, ABS, ASA, PC\u003c\/p\u003e\n\u003cp data-start=\"2588\" data-end=\"2600\"\u003eLimitations:\u003c\/p\u003e\n\u003cp data-start=\"2602\" data-end=\"2729\"\u003e• Very soft TPU (85A) has restrictions depending on setup\u003cbr data-start=\"2659\" data-end=\"2662\"\u003e• Some specialty filaments perform better at smaller nozzle sizes\u003c\/p\u003e\n\u003chr data-start=\"2731\" data-end=\"2734\"\u003e\n\u003ch2 data-section-id=\"1cgao1g\" data-start=\"2736\" data-end=\"2760\"\u003eRecommended use cases\u003c\/h2\u003e\n\u003cp data-start=\"2762\" data-end=\"2930\"\u003e• Carbon fiber and glass fiber printing\u003cbr data-start=\"2801\" data-end=\"2804\"\u003e• High-wear production environments\u003cbr data-start=\"2839\" data-end=\"2842\"\u003e• Engineering and industrial parts\u003cbr data-start=\"2876\" data-end=\"2879\"\u003e• Users tired of replacing hardened steel nozzles\u003c\/p\u003e\n\u003chr data-start=\"2932\" data-end=\"2935\"\u003e\n\u003ch2 data-section-id=\"14bu82z\" data-start=\"2937\" data-end=\"2953\"\u003eCompatibility\u003c\/h2\u003e\n\u003cp data-start=\"2955\" data-end=\"3083\"\u003e• Bambu Lab H2 Series\u003cbr data-start=\"2976\" data-end=\"2979\"\u003e• Bambu Lab P2S\u003cbr data-start=\"2994\" data-end=\"2997\"\u003e• H2D dual nozzle supported (same size required)\u003cbr data-start=\"3045\" data-end=\"3048\"\u003e• H2C: Left (lifting) hotend only\u003c\/p\u003e\n\u003chr data-start=\"3085\" data-end=\"3088\"\u003e\n\u003ch2 data-section-id=\"9rzg0e\" data-start=\"3090\" data-end=\"3110\"\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cp data-start=\"3112\" data-end=\"3142\"\u003e• Tungsten Carbide Nozzle ×1\u003c\/p\u003e\n\u003chr data-start=\"3144\" data-end=\"3147\"\u003e\n\u003ch2 data-section-id=\"knfsp4\" data-start=\"3149\" data-end=\"3167\"\u003eSpecs (typical)\u003c\/h2\u003e\n\u003cp data-start=\"3169\" data-end=\"3291\"\u003e• Material: Tungsten Carbide\u003cbr data-start=\"3197\" data-end=\"3200\"\u003e• Max temp: 350 °C\u003cbr data-start=\"3218\" data-end=\"3221\"\u003e• Hardness: HRA 90\u003cbr data-start=\"3239\" data-end=\"3242\"\u003e• Designed for high-wear and abrasive filaments\u003c\/p\u003e\n\u003chr data-start=\"3293\" data-end=\"3296\"\u003e\n\u003ch2 data-section-id=\"cb2lgp\" data-start=\"3298\" data-end=\"3316\"\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp data-start=\"3318\" data-end=\"3382\"\u003eNozzles and consumable components are final sale once installed.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Standard Flow \/ 0.4mm Tungsten Carbide","offer_id":43042933866559,"sku":"FAH040","price":81.0,"currency_code":"CAD","in_stock":true},{"title":"Standard Flow \/ 0.6mm Tungsten Carbide","offer_id":43042933899327,"sku":"FAH041","price":80.0,"currency_code":"CAD","in_stock":true},{"title":"Standard Flow \/ 0.8mm Tungsten Carbide","offer_id":43042933932095,"sku":"FAH042","price":80.0,"currency_code":"CAD","in_stock":true},{"title":"High Flow \/ 0.4mm Tungsten Carbide","offer_id":43043036168255,"sku":"FAH043","price":122.0,"currency_code":"CAD","in_stock":true},{"title":"High Flow \/ 0.6mm Tungsten Carbide","offer_id":43043036201023,"sku":"FAH044","price":122.0,"currency_code":"CAD","in_stock":true},{"title":"High Flow \/ 0.8mm Tungsten Carbide","offer_id":43043036233791,"sku":"FAH045","price":122.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAH040__2.png?v=1774418536"},{"product_id":"panda-designer-series-honeycomb-houndstooth-buildplate-a-p-x","title":"Panda Designer Series Honeycomb \u0026 Houndstooth Buildplate (A\/P\/X)","description":"\u003ch1 data-section-id=\"yzjpbk\" data-start=\"242\" data-end=\"312\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"244\" data-end=\"312\"\u003eBIQU Panda Build Plate — Honeycomb \u0026amp; Houndstooth Designer Series\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"314\" data-end=\"364\"\u003eDual Texture • Strong Adhesion • Functional Finish\u003c\/p\u003e\n\u003chr data-start=\"366\" data-end=\"369\"\u003e\n\u003ch2 data-section-id=\"rzkdgm\" data-start=\"371\" data-end=\"382\"\u003eOverview\u003c\/h2\u003e\n\u003cp data-start=\"384\" data-end=\"692\"\u003eElevate your prints with the BIQU Panda Designer Series Build Plate, featuring dual textured patterns that transfer directly onto your first layer. One side offers a \u003cstrong data-start=\"550\" data-end=\"578\"\u003emodern honeycomb pattern\u003c\/strong\u003e, while the other features a \u003cstrong data-start=\"607\" data-end=\"638\"\u003eclassic houndstooth texture\u003c\/strong\u003e—perfect for adding both style and grip to your parts.\u003c\/p\u003e\n\u003cp data-start=\"694\" data-end=\"866\"\u003eUnlike cosmetic-only plates, this surface uses a \u003cstrong data-start=\"743\" data-end=\"775\"\u003ecross-linked polymer coating\u003c\/strong\u003e to provide strong adhesion during printing and clean release once cooled—no glue required.\u003c\/p\u003e\n\u003chr data-start=\"868\" data-end=\"871\"\u003e\n\u003ch2 data-section-id=\"6mh3nb\" data-start=\"873\" data-end=\"891\"\u003eWhy you need it\u003c\/h2\u003e\n\u003cp data-start=\"893\" data-end=\"1264\"\u003e• Dual designer finishes: Honeycomb + houndstooth textures\u003cbr data-start=\"951\" data-end=\"954\"\u003e• Functional surfaces: Adds grip and anti-slip texture to parts\u003cbr data-start=\"1017\" data-end=\"1020\"\u003e• Strong adhesion: Reliable first layers for PLA and PETG\u003cbr data-start=\"1077\" data-end=\"1080\"\u003e• Clean release: Parts pop off easily after cooling\u003cbr data-start=\"1131\" data-end=\"1134\"\u003e• No glue needed: Engineered coating handles adhesion naturally\u003cbr data-start=\"1197\" data-end=\"1200\"\u003e• Durable build: Spring steel core resists warping and bending\u003c\/p\u003e\n\u003chr data-start=\"1266\" data-end=\"1269\"\u003e\n\u003ch2 data-section-id=\"1qm21pm\" data-start=\"1271\" data-end=\"1287\"\u003eSurface guide\u003c\/h2\u003e\n\u003cp data-start=\"1289\" data-end=\"1409\"\u003e\u003cstrong data-start=\"1289\" data-end=\"1307\"\u003eHoneycomb side\u003c\/strong\u003e\u003cbr data-start=\"1307\" data-end=\"1310\"\u003e• Modern geometric texture\u003cbr data-start=\"1336\" data-end=\"1339\"\u003e• Adds grip and structural appearance\u003cbr data-start=\"1376\" data-end=\"1379\"\u003e• Great for functional parts\u003c\/p\u003e\n\u003cp data-start=\"1411\" data-end=\"1536\"\u003e\u003cstrong data-start=\"1411\" data-end=\"1431\"\u003eHoundstooth side\u003c\/strong\u003e\u003cbr data-start=\"1431\" data-end=\"1434\"\u003e• Classic patterned finish\u003cbr data-start=\"1460\" data-end=\"1463\"\u003e• Ideal for cosmetic or consumer-facing parts\u003cbr data-start=\"1508\" data-end=\"1511\"\u003e• Unique, high-end look\u003c\/p\u003e\n\u003chr data-start=\"1538\" data-end=\"1541\"\u003e\n\u003ch2 data-section-id=\"1pkt87m\" data-start=\"1543\" data-end=\"1573\"\u003eCompatibility \u0026amp; usage guide\u003c\/h2\u003e\n\u003cp data-start=\"1575\" data-end=\"1759\"\u003e• Printers: Bambu Lab X1 \/ X1C \/ P1P \/ P1S \/ A1\u003cbr data-start=\"1622\" data-end=\"1625\"\u003e• Size: 256 × 256 mm\u003cbr data-start=\"1645\" data-end=\"1648\"\u003e• Material: Spring steel + cross-linked polymer coating\u003cbr data-start=\"1703\" data-end=\"1706\"\u003e• Mounting: Magnetic base required (OEM compatible)\u003c\/p\u003e\n\u003chr data-start=\"1761\" data-end=\"1764\"\u003e\n\u003ch2 data-section-id=\"14vew0e\" data-start=\"1766\" data-end=\"1783\"\u003ePrinting guide\u003c\/h2\u003e\n\u003cp data-start=\"1785\" data-end=\"1865\"\u003e• PLA: 60–65 °C bed\u003cbr data-start=\"1804\" data-end=\"1807\"\u003e• PETG: 70–80 °C bed\u003cbr data-start=\"1827\" data-end=\"1830\"\u003e• No glue required for normal use\u003c\/p\u003e\n\u003chr data-start=\"1867\" data-end=\"1870\"\u003e\n\u003ch2 data-section-id=\"co99wv\" data-start=\"1872\" data-end=\"1893\"\u003e⚠️ Important notes\u003c\/h2\u003e\n\u003cp data-start=\"1895\" data-end=\"2129\"\u003e• Do NOT use glue unless absolutely necessary (can reduce texture quality)\u003cbr data-start=\"1969\" data-end=\"1972\"\u003e• Designed for PLA and PETG performance\u003cbr data-start=\"2011\" data-end=\"2014\"\u003e• Let plate cool before removing prints for best results\u003cbr data-start=\"2070\" data-end=\"2073\"\u003e• Avoid aggressive scraping to protect surface texture\u003c\/p\u003e\n\u003chr data-start=\"2131\" data-end=\"2134\"\u003e\n\u003ch2 data-section-id=\"9rzg0e\" data-start=\"2136\" data-end=\"2156\"\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cp data-start=\"2158\" data-end=\"2215\"\u003e• 1 × BIQU Panda Build Plate (256 × 256 mm, dual-sided)\u003c\/p\u003e\n\u003chr data-start=\"2217\" data-end=\"2220\"\u003e\n\u003ch2 data-section-id=\"1ut1apo\" data-start=\"2222\" data-end=\"2235\"\u003eSetup tips\u003c\/h2\u003e\n\u003cp data-start=\"2237\" data-end=\"2487\"\u003e• Clean using blue Dawn dish soap + hot water, then towel-dry completely\u003cbr data-start=\"2309\" data-end=\"2312\"\u003e• IPA can be used lightly, but soap + water is preferred for longevity\u003cbr data-start=\"2382\" data-end=\"2385\"\u003e• Keep surface clean and oil-free for consistent adhesion\u003cbr data-start=\"2442\" data-end=\"2445\"\u003e• Store flat to maintain plate integrity\u003c\/p\u003e\n\u003chr data-start=\"2489\" data-end=\"2492\"\u003e\n\u003ch2 data-section-id=\"zt1hjh\" data-start=\"2494\" data-end=\"2541\"\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h2\u003e\n\u003cp data-start=\"2543\" data-end=\"2770\"\u003e• Same-day or next-business-day dispatch when in stock (after processing)\u003cbr data-start=\"2616\" data-end=\"2619\"\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr data-start=\"2699\" data-end=\"2702\"\u003e• In-store pickup available — local advice from active Bambu users\u003c\/p\u003e\n\u003chr data-start=\"2772\" data-end=\"2775\"\u003e\n\u003ch2 data-section-id=\"cb2lgp\" data-start=\"2777\" data-end=\"2795\"\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp data-start=\"2797\" data-end=\"2954\"\u003eBuild plates and consumables are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":43078004572223,"sku":"BQDESIGN-HC\u0026HT","price":35.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3010200041-Designer_1000_6_2.webp?v=1775551623"},{"product_id":"bambu-lab-x2d-ams-combo","title":"Bambu Lab X2D AMS Combo","description":"\u003ch1 data-section-id=\"4ktsjc\" data-start=\"269\" data-end=\"343\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"271\" data-end=\"343\"\u003eBambu Lab X2D (AMS Combo) — Dual-Nozzle, Multi-Color, Smart Enclosed\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"345\" data-end=\"399\"\u003eDual-Nozzle Printing • AMS Multi-Color • AI Monitoring\u003c\/p\u003e\n\u003chr data-start=\"401\" data-end=\"404\"\u003e\n\u003ch2 data-section-id=\"rzkdgm\" data-start=\"406\" data-end=\"417\"\u003eOverview\u003c\/h2\u003e\n\u003cp data-start=\"419\" data-end=\"546\"\u003eThe Bambu Lab X2D AMS Combo brings dual-nozzle printing and multi-material capability into a more compact, accessible platform.\u003c\/p\u003e\n\u003cp data-start=\"548\" data-end=\"848\"\u003eWith independent nozzles, active chamber heating, and AMS multi-color support, the X2D delivers cleaner supports, faster color changes, and reliable performance across both everyday and engineering materials—making it a strong upgrade from single-nozzle systems.\u003c\/p\u003e\n\u003chr data-start=\"850\" data-end=\"853\"\u003e\n\u003ch2 data-section-id=\"1ohkns5\" data-start=\"855\" data-end=\"882\"\u003eWhy choose the X2D Combo\u003c\/h2\u003e\n\u003cp data-start=\"884\" data-end=\"1173\"\u003e• Dual-nozzle printing for clean supports and minimal purge waste\u003cbr data-start=\"949\" data-end=\"952\"\u003e• AMS-ready multi-color printing out of the box\u003cbr data-start=\"999\" data-end=\"1002\"\u003e• Active heated chamber for stronger, warp-free parts\u003cbr data-start=\"1055\" data-end=\"1058\"\u003e• AI monitoring and auto-checks reduce failed prints\u003cbr data-start=\"1110\" data-end=\"1113\"\u003e• Compact enclosed system for home, shop, or classroom use\u003c\/p\u003e\n\u003chr data-start=\"1175\" data-end=\"1178\"\u003e\n\u003ch2 data-section-id=\"t4ytit\" data-start=\"1180\" data-end=\"1195\"\u003eKey features\u003c\/h2\u003e\n\u003cp data-start=\"1197\" data-end=\"1578\"\u003e• Dual-nozzle system: Dedicated support nozzle for clean removal\u003cbr data-start=\"1261\" data-end=\"1264\"\u003e• Closed-loop servo extruder: Smooth surfaces and consistent extrusion\u003cbr data-start=\"1334\" data-end=\"1337\"\u003e• Dual-intake cooling: Better overhangs and sharper detail\u003cbr data-start=\"1395\" data-end=\"1398\"\u003e• AI cameras: Detects spaghetti, clogs, and setup issues in real time\u003cbr data-start=\"1467\" data-end=\"1470\"\u003e• Tool-free nozzle swap: Fast and simple maintenance\u003cbr data-start=\"1522\" data-end=\"1525\"\u003e• Quiet operation: Optimized for low-noise printing\u003c\/p\u003e\n\u003chr data-start=\"1580\" data-end=\"1583\"\u003e\n\u003ch2 data-section-id=\"15c27wl\" data-start=\"1585\" data-end=\"1608\"\u003eCore specs (summary)\u003c\/h2\u003e\n\u003cp data-start=\"1610\" data-end=\"1878\"\u003e• Build volume (single nozzle): ~256 × 256 × 260 mm\u003cbr data-start=\"1661\" data-end=\"1664\"\u003e• Dual-nozzle area: ~235.5 × 256 × 256 mm\u003cbr data-start=\"1705\" data-end=\"1708\"\u003e• Nozzle temp: up to 300 °C\u003cbr data-start=\"1735\" data-end=\"1738\"\u003e• Chamber temp: up to ~65 °C (active heating)\u003cbr data-start=\"1783\" data-end=\"1786\"\u003e• Motion system: CoreXY\u003cbr data-start=\"1809\" data-end=\"1812\"\u003e• Power: 100–120 V (CA\/US)\u003c\/p\u003e\n\u003chr data-start=\"1880\" data-end=\"1883\"\u003e\n\u003ch2 data-section-id=\"1cryiqd\" data-start=\"1885\" data-end=\"1908\"\u003eAMS Combo highlights\u003c\/h2\u003e\n\u003cp data-start=\"1910\" data-end=\"2129\"\u003e• Includes AMS system for automatic filament switching\u003cbr data-start=\"1964\" data-end=\"1967\"\u003e• Multi-color and multi-material printing made simple\u003cbr data-start=\"2020\" data-end=\"2023\"\u003e• Expandable with additional AMS units (adapter required)\u003cbr data-start=\"2080\" data-end=\"2083\"\u003e• Clean filament routing and reduced tangles\u003c\/p\u003e\n\u003chr data-start=\"2131\" data-end=\"2134\"\u003e\n\u003ch2 data-section-id=\"14dx406\" data-start=\"2136\" data-end=\"2158\"\u003eMaterials (typical)\u003c\/h2\u003e\n\u003cp data-start=\"2160\" data-end=\"2309\"\u003e• PLA, PETG, TPU\u003cbr data-start=\"2176\" data-end=\"2179\"\u003e• PVA (supports)\u003cbr data-start=\"2195\" data-end=\"2198\"\u003e• ABS, ASA\u003cbr data-start=\"2208\" data-end=\"2211\"\u003e• Nylon (PA) and engineering materials\u003cbr data-start=\"2249\" data-end=\"2252\"\u003e• Compatible with CF\/GF materials (with proper nozzles)\u003c\/p\u003e\n\u003chr data-start=\"2311\" data-end=\"2314\"\u003e\n\u003ch2 data-section-id=\"9rzg0e\" data-start=\"2316\" data-end=\"2336\"\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cp data-start=\"2338\" data-end=\"2583\"\u003e• X2D printer (2x 0.4 mm hardened nozzle installed)\u003cbr data-start=\"2386\" data-end=\"2389\"\u003e• Textured PEI build plate\u003cbr data-start=\"2415\" data-end=\"2418\"\u003e• AMS unit (combo version)\u003cbr data-start=\"2444\" data-end=\"2447\"\u003e• Spool holder and accessories\u003cbr data-start=\"2477\" data-end=\"2480\"\u003e• External exhaust fan bundle\u003cbr data-start=\"2509\" data-end=\"2512\"\u003e• Tool kit and setup components\u003c\/p\u003e\n\u003chr data-start=\"2585\" data-end=\"2588\"\u003e\n\u003ch2 data-section-id=\"15dqgbd\" data-start=\"2590\" data-end=\"2605\"\u003eWho it’s for\u003c\/h2\u003e\n\u003cp data-start=\"2607\" data-end=\"2818\"\u003e• Users upgrading from single-nozzle printers\u003cbr data-start=\"2652\" data-end=\"2655\"\u003e• Customers wanting clean multi-material printing\u003cbr data-start=\"2704\" data-end=\"2707\"\u003e• Schools, makerspaces, and small production setups\u003cbr data-start=\"2758\" data-end=\"2761\"\u003e• Anyone wanting dual-nozzle without stepping up to H2D\u003c\/p\u003e\n\u003chr data-start=\"2820\" data-end=\"2823\"\u003e\n\u003ch2 data-section-id=\"1yq355f\" data-start=\"2825\" data-end=\"2874\"\u003eKey differences vs H2D\u003c\/h2\u003e\n\u003cp data-start=\"2876\" data-end=\"2990\"\u003e👉 X2D = more compact, easier entry into dual-nozzle\u003cbr data-start=\"2928\" data-end=\"2931\"\u003e👉 H2D = larger format + higher-end industrial capability\u003c\/p\u003e\n\u003chr data-start=\"2992\" data-end=\"2995\"\u003e\n\u003ch2 data-section-id=\"h9u9gu\" data-start=\"2997\" data-end=\"3043\"\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp data-start=\"3045\" data-end=\"3191\"\u003e• Same-day or next-business-day dispatch when in stock\u003cbr data-start=\"3099\" data-end=\"3102\"\u003e• Free local courier on eligible orders over $60\u003cbr data-start=\"3159\" data-end=\"3162\"\u003e• In-store pickup available\u003c\/p\u003e\n\u003chr data-start=\"3193\" data-end=\"3196\"\u003e\n\u003ch2 data-section-id=\"cb2lgp\" data-start=\"3198\" data-end=\"3216\"\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp data-start=\"3218\" data-end=\"3383\"\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43128143380543,"sku":"X2D-COMBO","price":1069.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/compressed.jpg?v=1776181485"},{"product_id":"bambu-lab-x2d-printer","title":"Bambu Lab X2D Printer","description":"\u003ch1 data-section-id=\"1206eoc\" data-start=\"104\" data-end=\"168\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"106\" data-end=\"168\"\u003eBambu Lab X2D — Dual-Nozzle, Smart Enclosed (Printer Only)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"170\" data-end=\"223\"\u003eDual-Nozzle Printing • Clean Supports • AI Monitoring\u003c\/p\u003e\n\u003chr data-start=\"225\" data-end=\"228\"\u003e\n\u003ch2 data-section-id=\"rzkdgm\" data-start=\"230\" data-end=\"241\"\u003eOverview\u003c\/h2\u003e\n\u003cp data-start=\"243\" data-end=\"433\"\u003eThe Bambu Lab X2D delivers dual-nozzle printing in a compact, enclosed system—designed for cleaner supports, faster material changes, and more efficient printing without the need for an AMS.\u003c\/p\u003e\n\u003cp data-start=\"435\" data-end=\"614\"\u003eWith independent nozzles and active chamber heating, the X2D produces stronger parts, cleaner finishes, and more consistent results across both everyday and engineering materials.\u003c\/p\u003e\n\u003chr data-start=\"616\" data-end=\"619\"\u003e\n\u003ch2 data-section-id=\"f34x61\" data-start=\"621\" data-end=\"642\"\u003eWhy choose the X2D\u003c\/h2\u003e\n\u003cp data-start=\"644\" data-end=\"950\"\u003e• Dual-nozzle printing for clean supports and reduced waste\u003cbr data-start=\"703\" data-end=\"706\"\u003e• No AMS required for multi-material workflows (supports + model)\u003cbr data-start=\"771\" data-end=\"774\"\u003e• Active heated chamber for stronger, warp-resistant parts\u003cbr data-start=\"832\" data-end=\"835\"\u003e• AI monitoring and auto-checks reduce failed prints\u003cbr data-start=\"887\" data-end=\"890\"\u003e• Compact enclosed system for home, shop, or classroom use\u003c\/p\u003e\n\u003chr data-start=\"952\" data-end=\"955\"\u003e\n\u003ch2 data-section-id=\"t4ytit\" data-start=\"957\" data-end=\"972\"\u003eKey features\u003c\/h2\u003e\n\u003cp data-start=\"974\" data-end=\"1355\"\u003e• Dual-nozzle system: Dedicated support nozzle for clean removal\u003cbr data-start=\"1038\" data-end=\"1041\"\u003e• Closed-loop servo extruder: Smooth surfaces and consistent extrusion\u003cbr data-start=\"1111\" data-end=\"1114\"\u003e• Dual-intake cooling: Better overhangs and sharper detail\u003cbr data-start=\"1172\" data-end=\"1175\"\u003e• AI cameras: Detects spaghetti, clogs, and setup issues in real time\u003cbr data-start=\"1244\" data-end=\"1247\"\u003e• Tool-free nozzle swap: Fast and simple maintenance\u003cbr data-start=\"1299\" data-end=\"1302\"\u003e• Quiet operation: Optimized for low-noise printing\u003c\/p\u003e\n\u003chr data-start=\"1357\" data-end=\"1360\"\u003e\n\u003ch2 data-section-id=\"15c27wl\" data-start=\"1362\" data-end=\"1385\"\u003eCore specs (summary)\u003c\/h2\u003e\n\u003cp data-start=\"1387\" data-end=\"1617\"\u003e• Build volume (single nozzle): ~256 × 256 × 260 mm\u003cbr data-start=\"1438\" data-end=\"1441\"\u003e• Dual-nozzle area: ~235.5 × 256 × 256 mm\u003cbr data-start=\"1482\" data-end=\"1485\"\u003e• Nozzle temp: up to 300 °C\u003cbr data-start=\"1512\" data-end=\"1515\"\u003e• Chamber temp: up to ~65 °C (active heating)\u003cbr data-start=\"1560\" data-end=\"1563\"\u003e• Motion system: CoreXY\u003cbr data-start=\"1586\" data-end=\"1589\"\u003e• Power: 100–120 V (CA\/US)\u003c\/p\u003e\n\u003chr data-start=\"1619\" data-end=\"1622\"\u003e\n\u003ch2 data-section-id=\"14dx406\" data-start=\"1624\" data-end=\"1646\"\u003eMaterials (typical)\u003c\/h2\u003e\n\u003cp data-start=\"1648\" data-end=\"1805\"\u003e• PLA, PETG, TPU\u003cbr data-start=\"1664\" data-end=\"1667\"\u003e• PVA (support material)\u003cbr data-start=\"1691\" data-end=\"1694\"\u003e• ABS, ASA\u003cbr data-start=\"1704\" data-end=\"1707\"\u003e• Nylon (PA) and engineering materials\u003cbr data-start=\"1745\" data-end=\"1748\"\u003e• Compatible with CF\/GF materials (with proper nozzles)\u003c\/p\u003e\n\u003chr data-start=\"1807\" data-end=\"1810\"\u003e\n\u003ch2 data-section-id=\"9rzg0e\" data-start=\"1812\" data-end=\"1832\"\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cp data-start=\"1834\" data-end=\"2001\"\u003e• X2D printer (2 × 0.4 mm hardened nozzles installed)\u003cbr data-start=\"1887\" data-end=\"1890\"\u003e• Textured PEI build plate\u003cbr data-start=\"1916\" data-end=\"1919\"\u003e• Spool holder\u003cbr data-start=\"1933\" data-end=\"1936\"\u003e• External exhaust fan bundle\u003cbr data-start=\"1965\" data-end=\"1968\"\u003e• Tool kit and setup components\u003c\/p\u003e\n\u003chr data-start=\"2003\" data-end=\"2006\"\u003e\n\u003ch2 data-section-id=\"15dqgbd\" data-start=\"2008\" data-end=\"2023\"\u003eWho it’s for\u003c\/h2\u003e\n\u003cp data-start=\"2025\" data-end=\"2244\"\u003e• Users upgrading from single-nozzle printers\u003cbr data-start=\"2070\" data-end=\"2073\"\u003e• Customers wanting clean support removal without AMS\u003cbr data-start=\"2126\" data-end=\"2129\"\u003e• Schools, makerspaces, and small production setups\u003cbr data-start=\"2180\" data-end=\"2183\"\u003e• Anyone wanting dual-nozzle without multi-color complexity\u003c\/p\u003e\n\u003chr data-start=\"2246\" data-end=\"2249\"\u003e\n\u003ch2 data-section-id=\"rrsy5y\" data-start=\"2251\" data-end=\"2275\"\u003eOptional upgrade path\u003c\/h2\u003e\n\u003cp data-start=\"2277\" data-end=\"2374\"\u003e👉 Add AMS later for full multi-color printing capability\u003cbr data-start=\"2334\" data-end=\"2337\"\u003e👉 Expand system as your needs grow\u003c\/p\u003e\n\u003chr data-start=\"2376\" data-end=\"2379\"\u003e\n\u003ch2 data-section-id=\"ze4s5t\" data-start=\"2381\" data-end=\"2412\"\u003eKey differences vs X2D Combo\u003c\/h2\u003e\n\u003cp data-start=\"2414\" data-end=\"2519\"\u003e👉 Printer-only = lower cost, no AMS included\u003cbr data-start=\"2459\" data-end=\"2462\"\u003e👉 AMS Combo = full multi-color printing out of the box\u003c\/p\u003e\n\u003chr data-start=\"2521\" data-end=\"2524\"\u003e\n\u003ch2 data-section-id=\"16sxoi5\" data-start=\"2526\" data-end=\"2551\"\u003eKey differences vs H2D\u003c\/h2\u003e\n\u003cp data-start=\"2553\" data-end=\"2662\"\u003e👉 X2D = compact, accessible dual-nozzle system\u003cbr data-start=\"2600\" data-end=\"2603\"\u003e👉 H2D = larger format + higher-end industrial capability\u003c\/p\u003e\n\u003chr data-start=\"2664\" data-end=\"2667\"\u003e\n\u003ch2 data-section-id=\"h9u9gu\" data-start=\"2669\" data-end=\"2715\"\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp data-start=\"2717\" data-end=\"2863\"\u003e• Same-day or next-business-day dispatch when in stock\u003cbr data-start=\"2771\" data-end=\"2774\"\u003e• Free local courier on eligible orders over $60\u003cbr data-start=\"2831\" data-end=\"2834\"\u003e• In-store pickup available\u003c\/p\u003e\n\u003chr data-start=\"2865\" data-end=\"2868\"\u003e\n\u003ch2 data-section-id=\"cb2lgp\" data-start=\"2870\" data-end=\"2888\"\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp data-start=\"2890\" data-end=\"3055\"\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43128289198143,"sku":"X2D","price":859.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/1-compressed.jpg?v=1776182289"},{"product_id":"air-filter-p2-x2-series","title":"Air Filter - X2D","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Air Filter — X2D Series (FAC213)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOdor Reduction • Particle Filtration • Easy Replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Air Filter (FAC213) is the official replacement air filter for the Bambu Lab X2D Series. Designed to work with the printer's integrated air filtration system, it helps reduce printing odors while capturing fine airborne particles generated during printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhether you're printing for hours at a time or working with materials that produce noticeable odors, replacing the filter regularly helps maintain airflow and keeps your printer operating at peak performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhy replace your air filter\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Helps reduce printing odors during operation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Captures fine airborne particles generated while printing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Maintains proper airflow through the filtration system\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Quick and easy replacement with no special tools required\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab replacement part for optimal fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Lab X2D\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X2D Combo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePlease confirm compatibility with your printer before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's included\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Air Filter (FAC213) ×1\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eInstallation \u0026amp; maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Power off the printer before replacing the filter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Remove the existing filter and install the new cartridge in the designated filter compartment\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Ensure the filter is fully seated before operating the printer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Replace when airflow decreases, odors become more noticeable, or according to your maintenance schedule\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eRecommended replacement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eReplacement intervals vary depending on materials and usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eTypical replacement is recommended every \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e100–300 printing hours\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, or sooner when frequently printing odor-producing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eImportant notes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Designed specifically for the Bambu Lab X2D Series\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Helps improve local air quality but does not replace proper room ventilation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• For best results, use in conjunction with appropriate ventilation when printing engineering or high-temperature materials\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Free local courier on eligible orders over $60\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• In-store pickup and knowledgeable local support available\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAccessories and consumables are final sale. Approved returns (if any) must be unused and unopened. Restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466328342591,"sku":"FAC213","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC213.png?v=1782706276"},{"product_id":"filament-track-switch","title":"Filament Track Switch - X2D \/ H2D\/H2C","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Lab Filament Track Switch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFlexible Filament Routing • Smarter Dual-Nozzle Printing • Expand Your Workflow\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Lab Filament Track Switch is an intelligent filament routing module designed for Bambu Lab dual-nozzle printers. It removes the fixed relationship between AMS units and individual nozzles, allowing either nozzle to use any compatible filament path for greater flexibility and more efficient multi-material printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhether you're printing support materials, engineering filaments, or complex multi-color projects, the Filament Track Switch opens up more routing options while reducing unnecessary filament restrictions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhy choose the Filament Track Switch\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Flexible filament routing: Either nozzle can access compatible filament paths\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Smarter multi-material printing: Freely assign materials to either nozzle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Expand your workflow: Ideal for complex dual-material and support printing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab accessory: Factory-designed for seamless integration\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Easy installation: Designed specifically for compatible Bambu printers\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Eliminates fixed AMS-to-nozzle assignments\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Supports dynamic filament mapping between nozzles\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Optimized for dual-nozzle printing workflows\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Improves flexibility when using multiple AMS units\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab replacement and upgrade component\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Lab X2D\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab H2 Series (compatible models)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePlease verify compatibility with your specific printer before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eImportant notes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eRequires a compatible dual-nozzle Bambu Lab printer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Intended for users running multi-material or multi-color workflows\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Installation may require printer configuration updates after installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eUsing the Filament Track Switch disables the use of the external spool holder on supported printers.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Consider this before purchasing if you regularly print from external spools.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's in the box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Filament Track Switch ×1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Installation hardware (as supplied by Bambu Lab)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eInstallation \u0026amp; setup\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Power off the printer before installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Follow the official Bambu Lab installation guide\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Verify filament routing after installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Run printer calibration if prompted following installation\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWho it's for\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Users running multiple AMS units\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Multi-material and multi-color printing enthusiasts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Engineers using dedicated support materials\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Print farms looking for greater material flexibility\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e\u003cspan\u003e• In-store pickup available with knowledgeable local support\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAccessories and upgrade components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466375233599,"sku":"SA016","price":76.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/track_2.png?v=1782706629"},{"product_id":"bambu-mag-alloy-scraper","title":"Bambu Mag-Alloy Scraper","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Lab Mag-Alloy Scraper\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePremium Aluminum Construction • Safe Print Removal • Magnetic Storage\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Lab Mag-Alloy Scraper is a premium print removal tool designed to lift finished prints safely and efficiently without damaging your build plate. Machined from a single piece of aluminum alloy, it combines exceptional durability with an ergonomic design that provides excellent control and leverage for removing even stubborn prints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIntegrated magnets allow convenient storage on metal surfaces, while the included silicone blade cover and spare blade ensure long-lasting performance and safe handling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhy choose the Mag-Alloy Scraper\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Easy print removal: Optimized blade angle slides beneath prints with minimal effort\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Protect your build plate: Low-profile design helps reduce the risk of scratches and damage\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Premium construction: CNC-machined from a solid piece of aluminum alloy\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Comfortable grip: Ergonomic design for both left- and right-handed users\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Magnetic storage: Built-in magnets keep the scraper within easy reach\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Replaceable blade: Includes an extra blade for extended service life\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Precision-machined aluminum alloy handle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Optimized blade geometry for safe print removal\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Silicone blade cover for safe storage\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Integrated magnets for convenient mounting\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Compatible with optional 3D printable decorative handle accessories from MakerWorld\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Compatible with all FDM 3D printers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Safe for use on PEI, textured PEI, smooth PEI, and other common build surfaces when used correctly\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's in the box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Mag-Alloy Scraper ×1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Spare replacement blade ×1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Self-adhesive steel mounting plate ×1\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eTips for use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Allow the build plate to cool before removing prints whenever possible\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Start from a corner and work the blade underneath gradually\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Keep the scraper as flat as possible against the build plate\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Replace the blade when it becomes worn for best performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Winnipeg: free local courier on eligible orders over $60\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• In-store pickup available with knowledgeable local support\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTools and accessories are final sale once used. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466440212543,"sku":"B-SA001","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/B-SA001-1.png?v=1782707600"},{"product_id":"silicone-sock-for-hotend-p2s","title":"Silicone Sock for Hotend - P2S\/X2D","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Silicone Sock for Hotend — P2S \/ X2D (FAH048)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThermal Insulation • Cleaner Nozzles • Genuine Bambu Lab Replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Silicone Sock for Hotend (FAH048) is an official replacement silicone sleeve designed for the Bambu Lab P2S and X2D. Made from high-temperature silicone, it helps maintain stable nozzle temperatures, improves thermal efficiency, and reduces plastic buildup on the hotend during printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eReplacing worn or damaged silicone socks helps maintain consistent print quality while protecting the heater block from stray filament and cooling airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhy replace your silicone sock\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Improves thermal stability for more consistent extrusion\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Helps prevent filament from sticking to the heater block and nozzle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Protects the hotend from cooling airflow and heat loss\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• High-temperature, tear-resistant silicone construction\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab replacement part for a precise factory fit\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• High-temperature silicone construction\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Helps maintain stable nozzle temperatures during long prints\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Reduces filament buildup around the hotend\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Quick, tool-free installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Designed specifically for the P2S and X2D hotend assemblies\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Lab P2S\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X2D\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's in the box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Silicone Sock for Hotend ×3\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eInstallation \u0026amp; maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Allow the hotend to cool completely before replacing the silicone sock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Remove the old sock and inspect the heater block for filament residue\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Press the new silicone sock firmly into place around the heater block\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Replace if torn, damaged, or heavily contaminated with filament\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Winnipeg: free local courier on eligible orders over $60\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• In-store pickup available with knowledgeable local support\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eReplacement parts and consumables are final sale once opened or installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466453647423,"sku":"FAH048","price":4.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAH048.jpg?v=1782709528"},{"product_id":"bambu-engineering-plate-a-p-x-256mm","title":"Bambu Engineering Plate - P2S \/ X2D \/ A1 \/ P1 \/ X1 Series","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Engineering Plate — X1 \/ P1 \/ P2S \/ X2D \/ A1 (FAP042)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSmooth Surface • Maximum Material Compatibility • Genuine Bambu Lab Build Plate\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Engineering Plate (FAP042) is the official smooth build plate for the Bambu Lab X1, P1, P2S, X2D, and A1 Series printers. Designed for maximum versatility, it provides reliable first-layer adhesion across Bambu Lab's entire filament lineup when used with a suitable layer of liquid or solid glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIts durable, high-temperature-resistant coating produces a smooth, professional finish on the bottom of every print, making it an excellent choice for engineering materials, functional parts, and precision prototypes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhy choose the Engineering Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Compatible with virtually all Bambu Lab filament types when used with glue\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Smooth surface produces clean, professional-looking first layers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Excellent choice for engineering and high-temperature materials\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Durable coating resists heat, scratches, and corrosion\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab build plate for factory fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Smooth engineering surface for premium bottom-layer finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Optimized for high-temperature printing applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Flexible spring steel core for easy print removal after cooling\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Surface temperature resistance up to 120°C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Built for long service life with proper care\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Lab X1 Series\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab P1 Series\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab P2S\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X2D\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab A1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePlease verify your printer model before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eRecommended materials\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• PLA \/ PLA-CF \/ PLA-GF \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• PETG \/ PETG-CF \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• TPU \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended as a release agent)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• ABS \/ ASA \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• PC \/ PC-CF \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• PA \/ PA-CF \/ PAHT-CF \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e• PET-CF \u003c\/span\u003e\u003cem\u003e\u003cspan\u003e(liquid glue recommended)\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's in the box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Engineering Plate (FAP042) ×1\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCare \u0026amp; maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Apply a thin layer of liquid glue before printing for improved adhesion and easier part removal\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Wash regularly with warm water and dish soap to remove oils and restore adhesion\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Allow the plate to cool before removing prints for best results\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Do not use acetone, as it may damage the surface coating\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• For X1, P1, and A1 printers, normal wear in the nozzle wiping area is expected and does not affect print quality\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• The Engineering Plate is a consumable item and will naturally wear over time with regular use\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Winnipeg: free local courier on eligible orders over $60\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• In-store pickup available with knowledgeable local support\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eBuild plates and consumables are final sale once used. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466471669823,"sku":"FAP042","price":42.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/111.png?v=1782711245"},{"product_id":"floating-damper-feet","title":"Bambu Floating Damper Feet - P2S \/ X2D","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eBambu Floating Damper Feet — P2S \/ X2D \/ X1 \/ P1 (FAZ051)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePremium Vibration Isolation • Quieter Printing • Genuine Bambu Lab Upgrade\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Bambu Floating Damper Feet (FAZ051) are Bambu Lab's latest vibration isolation feet, designed for the P2S and X2D while also serving as a premium upgrade for the X1 and P1 Series printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUnlike traditional rubber feet, the floating damper design absorbs and isolates printer vibration before it reaches your workbench, helping reduce operating noise and vibration transfer while maintaining excellent print quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhether you're running a single printer in your home office or multiple machines in a print farm, these upgraded feet help create a quieter, more refined printing experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhy choose the Floating Damper Feet\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Significantly reduces vibration transferred to desks and work surfaces\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Helps lower operating noise during printing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Official upgrade for X1 and P1 Series printers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Standard equipment on newer P2S and X2D platforms\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Tool-free installation with no permanent modifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Advanced floating damper design absorbs printer vibration\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Helps reduce resonance on desks, shelves, and workbenches\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• May improve print consistency in vibration-sensitive environments\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Simple drop-in replacement for factory feet\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Genuine Bambu Lab accessory with factory fit and finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Bambu Lab X2D\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab P2S\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X1 Carbon\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X1E\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab X1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab P1S\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Bambu Lab P1P\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePerfect as an upgrade for existing X1 and P1 Series printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWhat's in the box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Floating Damper Feet ×4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eInstallation \u0026amp; maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Power off the printer before installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Remove the original feet and install the floating damper feet in their place\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Ensure all four feet are seated evenly before printing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Periodically inspect the feet for wear or damage\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e• Same-day or next-business-day dispatch when in stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Winnipeg: free local courier on eligible orders over $60\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• In-store pickup available with knowledgeable local support\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003ePolicy snapshot\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAccessories and replacement parts are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466493591615,"sku":"FAZ051-V1","price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/floating_damper_feet_1500.png?v=1782713074"},{"product_id":"extruder-gear-assembly-p2s","title":"Extruder Gear Assembly - P2S \/ X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Extruder Gear Assembly — P2S \/ X2D (FAE035)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Gear Set • Precision Filament Feeding • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Extruder Gear Assembly (FAE035) is the official replacement gear assembly for the Bambu Lab P2S and X2D. Installed inside the extruder, the hardened steel drive gears are powered by the extrusion motor to precisely feed filament into the hotend or retract it during unloading and material changes.\u003c\/p\u003e\n\u003cp\u003eReplacing worn or damaged gears helps restore consistent extrusion, reduce filament slipping, and maintain dependable print quality—even during high-speed printing and when using abrasive materials.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Extruder Gear Assembly?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores smooth, consistent filament feeding\u003cbr\u003e• Hardened steel gears provide excellent wear resistance\u003cbr\u003e• Helps reduce filament slipping and grinding\u003cbr\u003e• Factory-fit replacement for reliable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• OEM hardened steel drive gear assembly\u003cbr\u003e• Precision-machined for smooth filament transport\u003cbr\u003e• Supports reliable loading, unloading, and retraction\u003cbr\u003e• Designed for high-speed printing and engineering materials\u003cbr\u003e• Direct replacement for the original P2S\/X2D extruder gear assembly\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab P2S\u003cbr\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Filament slipping or grinding during printing\u003cbr\u003e• Under-extrusion or inconsistent extrusion\u003cbr\u003e• Difficulty loading or unloading filament\u003cbr\u003e• Visible wear on the drive or idler gears\u003cbr\u003e• Excessive filament dust accumulating inside the extruder\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Extruder Unit Front Cover ×1\u003cbr\u003e• Extruder Gear ×1\u003cbr\u003e• Extruder Idler Pulley ×1\u003cbr\u003e• M3 × 8 Screw ×1\u003cbr\u003e• Spring ×1\u003cbr\u003e• Washer ×1\u003cbr\u003e• Bearing ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Clean any filament debris from the extruder before installing the new gear assembly\u003cbr\u003e• Inspect the filament sensor and cutter while the extruder is disassembled\u003cbr\u003e• Perform a filament load and extrusion test after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and mechanical components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43466605822015,"sku":"FAE035","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAE035-1.jpg?v=1782715919"},{"product_id":"vision-encoder-x2d","title":"Vision Encoder - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Vision Encoder — X2D (FAP037)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003ePrecision Motion Calibration • Under 50 μm Accuracy • Genuine Bambu Lab Accessory\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Vision Encoder (FAP037) is an advanced calibration accessory designed exclusively for the Bambu Lab X2D. Using over \u003cstrong\u003e10,000 precision optical reference markers\u003c\/strong\u003e and high-resolution vision-based measurements, it calibrates the printer's XY motion system to compensate for mechanical tolerances, belt wear, and long-term changes in machine geometry. The result is motion accuracy of \u003cstrong\u003eless than 50 μm\u003c\/strong\u003e, delivering exceptional dimensional precision and improved part fit.\u003c\/p\u003e\n\u003cp\u003eUnlike a build plate, the Vision Encoder is used only during the calibration process. A typical calibration takes approximately \u003cstrong\u003e5 minutes\u003c\/strong\u003e, with results remaining effective for weeks under normal operating conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy choose the Vision Encoder?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab calibration accessory\u003cbr\u003e• Calibrates XY motion accuracy to under \u003cstrong\u003e50 μm\u003c\/strong\u003e\u003cbr\u003e• Compensates for belt stretch, mechanical wear, and assembly tolerances\u003cbr\u003e• Improves dimensional accuracy across the entire build area\u003cbr\u003e• Especially beneficial for precision assemblies, mechanical parts, and large prints\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Over 10,000 optical calibration markers for high-resolution measurement\u003cbr\u003e• Approximately 5-minute calibration process\u003cbr\u003e• Calibration remains effective for weeks under normal use\u003cbr\u003e• Larger prints benefit even more from improved motion accuracy\u003cbr\u003e• Works with Bambu Studio's advanced dimensional compensation features for exceptional part fit\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eIdeal for\u003c\/h2\u003e\n\u003cp\u003e• Functional engineering parts\u003cbr\u003e• Tight-tolerance mechanical assemblies\u003cbr\u003e• Multi-part projects requiring excellent fitment\u003cbr\u003e• Production environments demanding repeatable dimensional accuracy\u003cbr\u003e• Users seeking the highest possible print precision\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Bambu Vision Encoder ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eImportant notes\u003c\/h2\u003e\n\u003cp\u003e• \u003cstrong\u003eThe Vision Encoder is a calibration tool only and is not a build plate.\u003c\/strong\u003e\u003cbr\u003e• Remove the protective film before first use.\u003cbr\u003e• The printer bed should be clean and at room temperature before calibration.\u003cbr\u003e• Store the Vision Encoder safely after calibration to protect the precision optical surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; usage\u003c\/h2\u003e\n\u003cp\u003e• Place the Vision Encoder on the printer bed when prompted by Bambu Studio.\u003cbr\u003e• Run the Vision Encoder calibration routine.\u003cbr\u003e• Remove and store the encoder once calibration is complete.\u003cbr\u003e• Recalibrate periodically, especially after moving the printer, replacing motion components, or following extensive printer use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eCalibration accessories are final sale once used. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491042066495,"sku":"FAP037","price":96.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ChatGPT_Image_Jul_4_2026_01_06_10_PM.png?v=1783188381"},{"product_id":"cooling-fan-for-hotend-x2d","title":"Cooling Fan for Hotend - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Cooling Fan for Hotend — X2D (FAF023)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Hotend Fan • Prevents Heat Creep • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Cooling Fan for Hotend (FAF023) is the official replacement hotend cooling fan for the Bambu Lab X2D. Its primary function is to cool the upper portion of the hotend (heat sink), preventing filament from softening before it reaches the melt zone. Proper cooling helps eliminate heat creep, ensuring reliable extrusion and reducing the risk of nozzle clogs.\u003c\/p\u003e\n\u003cp\u003eWhether you're replacing a failed fan or keeping a spare on hand, this genuine Bambu Lab assembly restores dependable hotend cooling and print reliability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Hotend Cooling Fan?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Prevents heat creep and premature filament softening\u003cbr\u003e• Reduces the risk of nozzle jams and extrusion issues\u003cbr\u003e• Maintains consistent hotend operating temperatures\u003cbr\u003e• Factory-fit replacement for reliable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official hotend cooling fan assembly for the X2D\u003cbr\u003e• Cools the hotend heat sink for stable filament feeding\u003cbr\u003e• Includes left and right air ducts for proper airflow distribution\u003cbr\u003e• Precision OEM design for quiet, reliable operation\u003cbr\u003e• Direct replacement for the factory-installed cooling fan\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Hotend cooling fan error or fan speed warning\u003cbr\u003e• Fan is noisy, rattling, or grinding\u003cbr\u003e• Frequent nozzle clogs or heat creep\u003cbr\u003e• Inconsistent extrusion after the hotend warms up\u003cbr\u003e• Fan no longer spins or operates intermittently\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Hotend Cooling Fan ×1\u003cbr\u003e• Left Air Duct ×1\u003cbr\u003e• Right Air Duct ×1\u003cbr\u003e• BT2×5 Screws ×3\u003cbr\u003e• BT1.6×5 Screws ×2\u003cbr\u003e• BT3×7 Screw ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement guide\u003cbr\u003e• Ensure all fan connectors are fully seated before reassembly\u003cbr\u003e• Keep the fan blades and air ducts free of dust and filament debris\u003cbr\u003e• Run a printer self-check after installation to verify proper fan operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAF023\u003cbr\u003e• Material: Metal\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 60 × 60 × 30 mm\u003cbr\u003e• Package Weight: Approx. 0.012 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491043246143,"sku":"FAF023","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAF023.png?v=1783188526"},{"product_id":"th-board-x2d","title":"TH Board - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu TH Board — X2D (DLB064)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Toolhead Interface Board • Genuine Bambu Lab Replacement Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu TH Board (DLB064) is the official replacement toolhead interface board for the Bambu Lab X2D. This circuit board serves as the communication and control hub for the toolhead, coordinating the operation of key components including the hotend, extruder, filament cutter, cooling fans, sensors, and heaters to ensure smooth, reliable printing.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a damaged board or troubleshooting an electrical fault, this genuine Bambu Lab part restores factory performance and reliability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the TH Board?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Controls communication between the printer and toolhead components\u003cbr\u003e• Restores reliable extrusion, heating, and sensor operation\u003cbr\u003e• Direct OEM replacement with factory fit and performance\u003cbr\u003e• Designed specifically for the X2D platform\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official X2D Toolhead (TH) Board assembly\u003cbr\u003e• Manages hotend heating and temperature monitoring\u003cbr\u003e• Controls extruder motor operation and filament movement\u003cbr\u003e• Interfaces with cooling fans, filament cutter, and onboard sensors\u003cbr\u003e• Precision OEM electronics for dependable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Toolhead communication errors\u003cbr\u003e• Hotend heating or temperature faults\u003cbr\u003e• Extruder or filament cutter not responding\u003cbr\u003e• Cooling fan or sensor failures with confirmed working components\u003cbr\u003e• Physical damage or electrical failure of the TH Board\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• TH Board ×1\u003cbr\u003e• BT2×5 Screws ×4\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Carefully disconnect and reconnect all toolhead wiring harnesses\u003cbr\u003e• Ensure all connectors are fully seated before reassembly\u003cbr\u003e• Run a printer self-test and calibration after installation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: DLB064\u003cbr\u003e• Material: Circuit Board\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 100 × 70 × 35 mm\u003cbr\u003e• Package Weight: Approx. 0.015 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491044360255,"sku":"DLB064","price":63.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/DLB064.png?v=1783188691"},{"product_id":"hotend-heating-assembly-connection-board-x2d","title":"Hotend Heating Assembly Connection Board - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Hotend Heating Assembly Connection Board — X2D (DLB065)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Toolhead Interface Board • Hotend Connection Board • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Hotend Heating Assembly Connection Board (DLB065) is the official replacement interface board for the Bambu Lab X2D hotend assembly. Mounted directly above the extruder, this board serves as the central connection point for several critical toolhead components, ensuring reliable communication and power distribution throughout the print head. It connects the extruder, filament sensor board, eddy current coils, and front toolhead components to the printer's electronics.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a damaged board or repairing a communication fault, this genuine Bambu Lab component restores factory performance and dependable operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Hotend Heating Assembly Connection Board?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores reliable electrical connections within the toolhead\u003cbr\u003e• Supports proper communication between key printhead components\u003cbr\u003e• Factory-fit OEM replacement for dependable long-term performance\u003cbr\u003e• Designed specifically for the X2D platform\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official X2D hotend interface board\u003cbr\u003e• Connects the extruder assembly and filament sensor board\u003cbr\u003e• Interfaces with the eddy current calibration coils\u003cbr\u003e• Supports front toolhead cover electronics and wiring\u003cbr\u003e• Precision OEM circuit board for reliable signal transmission\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Toolhead communication errors\u003cbr\u003e• Hotend heating or sensor faults\u003cbr\u003e• Extruder or filament sensor not responding correctly\u003cbr\u003e• Intermittent electrical connection issues\u003cbr\u003e• Physical damage or failed interface board\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Hotend Heating Assembly Connection Board ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Carefully disconnect all toolhead wiring before removing the board\u003cbr\u003e• Ensure no cables are pinched during reassembly\u003cbr\u003e• Verify all connectors are fully seated before powering on the printer\u003cbr\u003e• Run a printer self-test after installation to confirm proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: DLB065\u003cbr\u003e• Product Type: Hotend Heating Assembly Connection Board\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491044950079,"sku":"DLB065","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/DLB065.png?v=1783188847"},{"product_id":"extruder-connection-board-x2d","title":"Extruder Connection Board - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Extruder Connection Board — X2D (DLB066)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Interface Board • Extruder Signal \u0026amp; Power Board • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Extruder Connection Board (DLB066) is the official replacement interface board for the Bambu Lab X2D extruder assembly. Installed on the rear of the extruder, it serves as the central electrical interface between the extruder components and the printer's main control system, managing power delivery and communication for critical toolhead functions.\u003c\/p\u003e\n\u003cp\u003eWhether you're replacing a damaged board or repairing an electrical fault, this genuine Bambu Lab component restores reliable communication and factory-level performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Extruder Connection Board?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores stable communication between the extruder and printer electronics\u003cbr\u003e• Supports reliable operation of motors, heaters, and sensors\u003cbr\u003e• Factory-fit OEM replacement for dependable long-term performance\u003cbr\u003e• Designed specifically for the X2D platform\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official X2D extruder interface board\u003cbr\u003e• Distributes power and communication signals throughout the extruder assembly\u003cbr\u003e• Supports the operation of the extruder motor, sensors, and heating system\u003cbr\u003e• Precision OEM electronics for reliable signal transmission\u003cbr\u003e• Direct replacement for the factory-installed connection board\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Toolhead communication errors\u003cbr\u003e• Extruder not responding correctly\u003cbr\u003e• Heater or sensor faults with confirmed working components\u003cbr\u003e• Intermittent electrical connection issues\u003cbr\u003e• Physical damage or failure of the connection board\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Extruder Connection Board ×1\u003cbr\u003e• M1.6×4 Screws ×2\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Carefully disconnect all wiring before removing the board\u003cbr\u003e• Ensure every connector is fully seated during reassembly\u003cbr\u003e• Inspect wiring for pinched or damaged cables before closing the toolhead\u003cbr\u003e• Run a printer self-test after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: DLB066\u003cbr\u003e• Material: Circuit Board\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 105 × 72 × 35 mm\u003cbr\u003e• Package Weight: Approx. 0.038 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491046326335,"sku":"DLB066","price":14.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/DLB066.png?v=1783188948"},{"product_id":"filament-cutter-left-x2d","title":"Filament Cutter - Left - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Left Filament Cutter — X2D (FAC203)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Cutter • Left Nozzle • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Left Filament Cutter (FAC203) is the official replacement filament cutter for the \u003cstrong\u003eleft nozzle\u003c\/strong\u003e of the Bambu Lab X2D. During filament changes, the cutter cleanly snips the filament inside the toolhead, allowing the printer to unload material efficiently and perform fast, reliable multi-color and multi-material transitions.\u003c\/p\u003e\n\u003cp\u003eReplacing a worn or damaged cutter helps maintain dependable filament changes, minimizes loading errors, and ensures clean operation of the left extruder.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Left Filament Cutter?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Produces clean, reliable filament cuts during material changes\u003cbr\u003e• Helps prevent loading and unloading errors\u003cbr\u003e• Supports dependable multi-color and multi-material printing\u003cbr\u003e• Precision OEM replacement for long service life\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official left-side filament cutter for the X2D\u003cbr\u003e• Hardened steel cutting blade for long-lasting performance\u003cbr\u003e• Cleanly severs filament before unloading or switching materials\u003cbr\u003e• Optimized for high-cycle automatic operation\u003cbr\u003e• Direct replacement for the factory-installed cutter\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This cutter is designed for the \u003cstrong\u003eleft nozzle only\u003c\/strong\u003e. For the right nozzle, purchase the corresponding right-side filament cutter.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Incomplete or failed filament cuts\u003cbr\u003e• Filament unloading errors\u003cbr\u003e• Material changes fail or require manual intervention\u003cbr\u003e• Cutter blade becomes chipped, bent, or worn\u003cbr\u003e• Printer reports filament cutter-related errors\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Left Filament Cutter ×3\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Inspect the cutter lever and spring while replacing the blade\u003cbr\u003e• Remove any filament debris from the cutter area before reassembly\u003cbr\u003e• Test a filament load\/unload cycle after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC203\u003cbr\u003e• Product Type: Left Filament Cutter\u003cbr\u003e• Material: Hardened steel\u003cbr\u003e• Quantity: Pack of 3 genuine replacement cutters\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and consumable components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491046588479,"sku":"FAC203","price":3.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC203.png?v=1783189072"},{"product_id":"filament-cutter-right-x2d","title":"Filament Cutter - Right - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Right Filament Cutter — X2D (FAC204)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Cutter • Right Nozzle • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Right Filament Cutter (FAC204) is the official replacement filament cutter for the \u003cstrong\u003eright nozzle\u003c\/strong\u003e of the Bambu Lab X2D. During filament changes, the cutter cleanly severs the filament inside the toolhead, allowing the printer to unload material efficiently and perform fast, reliable multi-color and multi-material transitions. Replacing a worn cutter helps maintain dependable filament changes while minimizing loading errors and print interruptions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Right Filament Cutter?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Produces clean, reliable filament cuts during material changes\u003cbr\u003e• Helps prevent loading and unloading errors\u003cbr\u003e• Supports dependable multi-color and multi-material printing\u003cbr\u003e• Precision OEM replacement for long service life\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official right-side filament cutter for the X2D\u003cbr\u003e• Hardened steel cutting blade for excellent durability\u003cbr\u003e• Cleanly severs filament before unloading or switching materials\u003cbr\u003e• Optimized for high-cycle automatic operation\u003cbr\u003e• Direct replacement for the factory-installed cutter\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This cutter is designed for the \u003cstrong\u003eright nozzle only\u003c\/strong\u003e. For the left nozzle, purchase the corresponding \u003cstrong\u003eFAC203 Left Filament Cutter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Incomplete or failed filament cuts\u003cbr\u003e• Filament unloading errors\u003cbr\u003e• Material changes fail or require manual intervention\u003cbr\u003e• Cutter blade becomes chipped, bent, or worn\u003cbr\u003e• Printer reports filament cutter-related errors\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Right Filament Cutter ×3\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Inspect the cutter lever and spring while replacing the blade\u003cbr\u003e• Remove any filament debris from the cutter area before reassembly\u003cbr\u003e• Test a filament load\/unload cycle after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC204\u003cbr\u003e• Product Type: Right Filament Cutter\u003cbr\u003e• Material: Hardened steel\u003cbr\u003e• Quantity: Pack of 3 genuine replacement cutters\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and consumable components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491049504831,"sku":"FAC204","price":3.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC204.png?v=1783189158"},{"product_id":"eddy-sensor-right-x2d","title":"Eddy Sensor - Right - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Right Eddy Sensor — X2D (FAC206)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Sensor • Active Filament Flow Calibration • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Right Eddy Sensor (FAC206) is the official replacement eddy current sensor for the \u003cstrong\u003eright nozzle\u003c\/strong\u003e of the Bambu Lab X2D. Installed between the right hotend and the extruder, it enables the printer's active filament flow calibration system, helping maintain accurate extrusion, consistent print quality, and reliable first-layer performance.\u003c\/p\u003e\n\u003cp\u003eIf the sensor becomes damaged or fails, the printer may experience calibration errors, bed leveling failures, or inaccurate extrusion. Replacing the sensor restores factory performance and dependable operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Right Eddy Sensor?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores active filament flow calibration\u003cbr\u003e• Supports accurate extrusion and dimensional consistency\u003cbr\u003e• Helps ensure reliable Z-axis homing and bed leveling\u003cbr\u003e• Precision OEM replacement for dependable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official right-side eddy current sensor for the X2D\u003cbr\u003e• Mounted between the right hotend and extruder\u003cbr\u003e• Enables real-time filament flow calibration\u003cbr\u003e• Assists with nozzle detection during printer calibration\u003cbr\u003e• Direct replacement for the factory-installed sensor\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This sensor is designed for the \u003cstrong\u003eright nozzle only\u003c\/strong\u003e. For the left nozzle, purchase the corresponding Left Eddy Sensor.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Right Eddy Sensor error messages\u003cbr\u003e• Bed leveling or Z-axis homing failures caused by the sensor\u003cbr\u003e• Filament flow calibration failures\u003cbr\u003e• Inconsistent extrusion despite a properly functioning hotend\u003cbr\u003e• Physical damage to the sensor or cable\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Right Eddy Sensor ×1\u003cbr\u003e• Mounting Screws ×2\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Route the sensor cable exactly as originally installed to prevent pinching\u003cbr\u003e• Ensure the connector is fully seated before reassembly\u003cbr\u003e• Run a complete bed leveling and filament flow calibration after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC206\u003cbr\u003e• Product Type: Right Eddy Current Sensor\u003cbr\u003e• Sensor Location: Right hotend \/ extruder assembly\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491049865279,"sku":"FAC206","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC206.png?v=1783189233"},{"product_id":"eddy-sensor-left-x2d","title":"Eddy Sensor - Left - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Left Eddy Sensor — X2D (FAC205)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Sensor • Active Filament Flow Calibration • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Left Eddy Sensor (FAC205) is the official replacement eddy current sensor for the \u003cstrong\u003eleft nozzle\u003c\/strong\u003e of the Bambu Lab X2D. Installed between the left hotend and the extruder, it enables the printer's active filament flow calibration system, helping maintain accurate extrusion, consistent print quality, and reliable first-layer performance.\u003c\/p\u003e\n\u003cp\u003eIf the sensor becomes damaged or fails, the printer may experience calibration errors, bed leveling failures, or inaccurate extrusion. Replacing the sensor restores factory performance and dependable operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Left Eddy Sensor?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores active filament flow calibration\u003cbr\u003e• Supports accurate extrusion and dimensional consistency\u003cbr\u003e• Helps ensure reliable Z-axis homing and bed leveling\u003cbr\u003e• Precision OEM replacement for dependable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official left-side eddy current sensor for the X2D\u003cbr\u003e• Mounted between the left hotend and extruder\u003cbr\u003e• Enables real-time filament flow calibration\u003cbr\u003e• Assists with nozzle detection during printer calibration\u003cbr\u003e• Direct replacement for the factory-installed sensor\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This sensor is designed for the \u003cstrong\u003eleft nozzle only\u003c\/strong\u003e. For the right nozzle, purchase the corresponding \u003cstrong\u003eFAC206 Right Eddy Sensor\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Left Eddy Sensor error messages\u003cbr\u003e• Bed leveling or Z-axis homing failures caused by the sensor\u003cbr\u003e• Filament flow calibration failures\u003cbr\u003e• Inconsistent extrusion despite a properly functioning hotend\u003cbr\u003e• Physical damage to the sensor or cable\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Left Eddy Sensor ×1\u003cbr\u003e• Mounting Screws ×2\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Route the sensor cable exactly as originally installed to prevent pinching\u003cbr\u003e• Ensure the connector is fully seated before reassembly\u003cbr\u003e• Run a complete bed leveling and filament flow calibration after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC205\u003cbr\u003e• Product Type: Left Eddy Current Sensor\u003cbr\u003e• Sensor Location: Left hotend \/ extruder assembly\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491051995199,"sku":"FAC205","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC205.png?v=1783189594"},{"product_id":"extruder-filament-sensor-left-x2d","title":"Extruder Filament Sensor - Left - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Left Extruder Filament Sensor — X2D (DLB067)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Sensor • Hall Detection Board • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Left Extruder Filament Sensor (DLB067) is the official replacement filament detection sensor for the \u003cstrong\u003eleft extruder\u003c\/strong\u003e of the Bambu Lab X2D. Installed on the upper left side of the extruder assembly, this Hall detection board monitors filament presence during loading, printing, unloading, and material changes to ensure reliable printer operation.\u003c\/p\u003e\n\u003cp\u003eIf the sensor becomes damaged or fails, the printer may report false filament runout or unload errors, interrupt prints, or fail to load filament correctly. Replacing the sensor restores accurate filament detection and dependable printing performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Left Extruder Filament Sensor?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores accurate filament presence detection\u003cbr\u003e• Helps prevent false runout and unload errors\u003cbr\u003e• Supports reliable automatic filament loading and unloading\u003cbr\u003e• Direct OEM replacement for dependable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official Hall detection board for the left extruder\u003cbr\u003e• Detects filament presence during all printing operations\u003cbr\u003e• Improves reliability during multi-color and multi-material printing\u003cbr\u003e• Compact OEM design with factory-fit installation\u003cbr\u003e• Direct replacement for the original X2D sensor\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This sensor is designed for the \u003cstrong\u003eleft extruder only\u003c\/strong\u003e. For the right extruder, purchase the corresponding Right Extruder Filament Sensor.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• False filament runout warnings\u003cbr\u003e• False filament unload errors\u003cbr\u003e• Printer fails to detect inserted filament\u003cbr\u003e• Automatic loading or unloading failures\u003cbr\u003e• Physical damage to the sensor or wiring\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Left Hall Detection Board ×1\u003cbr\u003e• BT2×5 Screws ×2\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement guide\u003cbr\u003e• Ensure the sensor connector is fully seated before reassembly\u003cbr\u003e• Route the cable exactly as originally installed to prevent pinching\u003cbr\u003e• Perform a filament loading test after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: DLB067\u003cbr\u003e• Product Type: Left Extruder Filament Sensor (Hall Detection Board)\u003cbr\u003e• Material: Plastic\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 60 × 60 × 30 mm\u003cbr\u003e• Package Weight: Approx. 0.0034 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491052290111,"sku":"DLB067","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/DLB067.png?v=1783189724"},{"product_id":"flow-blocker-x2d","title":"Flow Blocker - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Flow Blocker — X2D (FAC207)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Flow Blocker • Prevents Inactive Nozzle Oozing • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Flow Blocker (FAC207) is the official replacement flow blocker for the Bambu Lab X2D. This precision metal component is installed on the toolhead and seals the \u003cstrong\u003einactive nozzle\u003c\/strong\u003e during dual-nozzle printing, preventing molten filament from dripping or oozing while the other nozzle is actively printing.\u003c\/p\u003e\n\u003cp\u003eBy reducing unwanted filament leakage, the Flow Blocker helps produce cleaner multi-material and multi-color prints with sharper transitions, fewer surface blemishes, and less stringing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Flow Blocker?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Prevents filament oozing from the inactive nozzle\u003cbr\u003e• Produces cleaner dual-nozzle prints with fewer defects\u003cbr\u003e• Helps reduce color contamination during material changes\u003cbr\u003e• Precision OEM replacement for reliable long-term performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official X2D flow blocker assembly\u003cbr\u003e• Seals the inactive nozzle during printing\u003cbr\u003e• Improves print quality during multi-color and multi-material jobs\u003cbr\u003e• Durable metal construction for long service life\u003cbr\u003e• Direct replacement for the factory-installed flow blocker\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Filament drips from the inactive nozzle\u003cbr\u003e• Increased stringing during nozzle changes\u003cbr\u003e• Color contamination between materials\u003cbr\u003e• Flow blocker is bent, worn, or physically damaged\u003cbr\u003e• Printer inspection identifies excessive wear on the blocker\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Flow Blocker ×1\u003cbr\u003e• Nozzle Cleaning Pads ×3\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off the printer and allow both hotends to cool completely before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Inspect the purge wiper and cleaning station while replacing the flow blocker\u003cbr\u003e• Verify the blocker moves freely and seals the inactive nozzle correctly\u003cbr\u003e• Run a dual-nozzle test print after installation to confirm proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC207\u003cbr\u003e• Product Type: Flow Blocker\u003cbr\u003e• Material: Metal\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and consumable components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491053174847,"sku":"FAC207","price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC207.png?v=1783190076"},{"product_id":"flow-blocker-assembly-x2d","title":"Flow Blocker Assembly - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Flow Blocker Assembly — X2D (FAC208)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Assembly • Controls Flow Blocker Plate • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Flow Blocker Assembly (FAC208) is the official replacement actuator assembly for the Bambu Lab X2D. Installed on the underside of the toolhead, this mechanism controls the position of the \u003cstrong\u003eFlow Blocker Plate\u003c\/strong\u003e while simultaneously raising and lowering the right auxiliary hotend during nozzle switching. This coordinated movement ensures the active nozzle is correctly engaged while the inactive nozzle remains sealed to prevent unwanted filament leakage.\u003c\/p\u003e\n\u003cp\u003eIf the assembly becomes worn or damaged, replacing it restores smooth nozzle transitions, proper material routing, and reliable dual-nozzle operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Flow Blocker Assembly?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement assembly\u003cbr\u003e• Controls movement of the Flow Blocker Plate\u003cbr\u003e• Coordinates right auxiliary hotend positioning during nozzle changes\u003cbr\u003e• Restores reliable dual-nozzle switching performance\u003cbr\u003e• Factory-fit OEM replacement for dependable long-term operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official X2D flow blocker actuator assembly\u003cbr\u003e• Controls the position of the Flow Blocker Plate\u003cbr\u003e• Raises and lowers the right auxiliary hotend during nozzle changes\u003cbr\u003e• Supports precise material routing inside the toolhead\u003cbr\u003e• Direct replacement for the factory-installed assembly\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Flow blocker no longer moves correctly\u003cbr\u003e• Right nozzle fails to engage or disengage properly\u003cbr\u003e• Filament leakage from the inactive nozzle\u003cbr\u003e• Nozzle switching errors during multi-material printing\u003cbr\u003e• Physical damage or excessive wear to the flow blocker mechanism\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Flow Blocker Assembly ×1\u003cbr\u003e• BT3×9.5 Screws ×3\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Inspect the Flow Blocker Plate, purge wiper, and cleaning station while the toolhead is disassembled\u003cbr\u003e• Ensure the assembly moves freely before reassembly\u003cbr\u003e• Run a dual-nozzle calibration and test print after installation to verify proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAC208\u003cbr\u003e• Product Type: Flow Blocker Assembly\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and mechanical assemblies are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491053305919,"sku":"FAC208","price":17.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAC208.png?v=1783190190"},{"product_id":"auxiliary-extruder-gear-assembly-x2d","title":"Auxiliary Extruder Gear Assembly - X2D","description":"\u003ch1 data-section-id=\"2ml5my\" data-start=\"208\" data-end=\"267\" class=\"PDq2pG_selectionAnchorContainer\"\u003e\n\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"210\" data-end=\"267\"\u003eBambu Auxiliary Extruder Gear Assembly — X2D (FAE051)\u003c\/strong\u003e\u003c\/span\u003e\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp data-start=\"269\" data-end=\"344\"\u003eOfficial Replacement Gear Set • Auxiliary Extruder • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu \u003cstrong\u003eAuxiliary Extruder Gear Assembly (FAE051)\u003c\/strong\u003e is the official replacement gear assembly for the \u003cstrong\u003eauxiliary extruder\u003c\/strong\u003e in the Bambu Lab X2D. Located inside the auxiliary extruder and driven directly by the extruder motor, this assembly feeds filament to the auxiliary hotend during printing and retracts filament during material changes, ensuring smooth, accurate extrusion and dependable dual-nozzle operation.\u003c\/p\u003e\n\u003cp\u003eReplacing worn gears restores proper filament grip, improves feeding consistency, and helps eliminate extrusion issues caused by gear wear.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Auxiliary Extruder Gear Assembly?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores reliable filament feeding and retraction\u003cbr\u003e• Improves extrusion consistency and print quality\u003cbr\u003e• Precision OEM gears for long service life\u003cbr\u003e• Factory-fit replacement for dependable dual-nozzle performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official auxiliary extruder gear assembly for the X2D\u003cbr\u003e• Driven directly by the auxiliary extruder motor\u003cbr\u003e• Feeds filament smoothly into the auxiliary hotend\u003cbr\u003e• Controls filament retraction during unloading and material changes\u003cbr\u003e• Direct replacement for the factory-installed gear assembly\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003ePlease verify your printer model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Extruder clicking or slipping during printing\u003cbr\u003e• Under-extrusion or inconsistent filament flow\u003cbr\u003e• Difficulty loading or unloading filament\u003cbr\u003e• Worn or damaged drive gears\u003cbr\u003e• Reduced filament grip after extended use\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Active Gear ×1\u003cbr\u003e• Passive Gear ×1\u003cbr\u003e• Spring ×1\u003cbr\u003e• Spring Plate ×1\u003cbr\u003e• 693ZZ Bearing ×1\u003cbr\u003e• M3×8 Screw ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Follow the official Bambu Lab replacement procedure\u003cbr\u003e• Clean any filament debris from the extruder housing before installation\u003cbr\u003e• Verify the gears rotate freely before reassembly\u003cbr\u003e• Perform a filament loading test after installation to confirm proper operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAE051\u003cbr\u003e• Product Type: Auxiliary Extruder Gear Assembly\u003cbr\u003e• Material: Metal\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 60 × 60 × 30 mm\u003cbr\u003e• Package Weight: Approx. 0.026 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and mechanical components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491053600831,"sku":"FAE051","price":17.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAE051.png?v=1783190298"},{"product_id":"auxiliary-hotend-heating-assembly-right-x2d","title":"Auxiliary Hotend Heating Assembly - Right - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Right Auxiliary Hotend Heating Assembly — X2D (FAH058)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Heating Assembly • Right Auxiliary Hotend • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Right Auxiliary Hotend Heating Assembly (FAH058) is the official replacement heating assembly for the \u003cstrong\u003eright (auxiliary) hotend\u003c\/strong\u003e on the Bambu Lab X2D. Installed directly on the right side of the toolhead, this assembly is responsible for heating the auxiliary nozzle to the precise temperature required for printing, enabling fast and reliable dual-nozzle operation.\u003c\/p\u003e\n\u003cp\u003eFeaturing Bambu Lab's quick-release clamping design, the heating assembly can be removed and replaced quickly for routine maintenance or repairs with minimal printer downtime.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Right Auxiliary Hotend Heating Assembly?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores proper nozzle heating performance\u003cbr\u003e• Supports reliable dual-nozzle printing and material changes\u003cbr\u003e• Quick-release clamping system for fast servicing\u003cbr\u003e• Factory-fit OEM replacement for dependable long-term operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official right auxiliary hotend heating assembly for the X2D\u003cbr\u003e• Heats the right (auxiliary) nozzle during printing\u003cbr\u003e• Quick-clamp design allows rapid hotend replacement\u003cbr\u003e• Precision OEM construction for consistent thermal performance\u003cbr\u003e• Direct replacement for the factory-installed heating assembly\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This heating assembly is designed for the \u003cstrong\u003eright auxiliary hotend only\u003c\/strong\u003e. For the primary (left) hotend, use the corresponding Left Hotend Heating Assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Right hotend fails to heat\u003cbr\u003e• Heating temperature errors or thermal faults\u003cbr\u003e• Auxiliary nozzle cannot maintain printing temperature\u003cbr\u003e• Physical damage to the heater assembly or wiring\u003cbr\u003e• Intermittent heating during dual-nozzle operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Right Auxiliary Hotend Heating Assembly ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Allow both hotends to cool completely before removal\u003cbr\u003e• Release the quick-clamp mechanism and replace the heating assembly following the official Bambu Lab procedure\u003cbr\u003e• Ensure the heater connector is fully seated before reassembly\u003cbr\u003e• Run a hotend self-test after installation to verify proper heating performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAH058\u003cbr\u003e• Product Type: Right Auxiliary Hotend Heating Assembly\u003cbr\u003e• Material: Metal\u003cbr\u003e• Color: Black\u003cbr\u003e• Package Size: 63 × 62 × 32 mm\u003cbr\u003e• Package Weight: Approx. 0.024 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic\/mechanical components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491054354495,"sku":"FAH058","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAH057.png?v=1783190492"},{"product_id":"hotend-heating-assembly-left-x2d","title":"Hotend Heating Assembly - Left - X2D","description":"\u003ch1\u003e\u003cstrong\u003eBambu Left Hotend Heating Assembly — X2D (FAH057)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eOfficial Replacement Heating Assembly • Primary Left Hotend • Genuine Bambu Lab Part\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Left Hotend Heating Assembly (FAH057) is the official replacement heating assembly for the \u003cstrong\u003eprimary (left) hotend\u003c\/strong\u003e on the Bambu Lab X2D. Installed directly on the left side of the toolhead, this assembly heats the primary nozzle to the precise temperatures required for consistent extrusion across everyday, engineering, and composite materials.\u003c\/p\u003e\n\u003cp\u003eFeaturing Bambu Lab's quick-release clamping design, the heating assembly can be removed and replaced quickly for routine maintenance or nozzle servicing, minimizing printer downtime.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy replace the Left Hotend Heating Assembly?\u003c\/h2\u003e\n\u003cp\u003e• Genuine Bambu Lab replacement part\u003cbr\u003e• Restores proper heating performance for the primary nozzle\u003cbr\u003e• Supports consistent extrusion and print quality\u003cbr\u003e• Quick-release clamping system for fast servicing\u003cbr\u003e• Factory-fit OEM replacement for dependable long-term operation\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e• Official left (primary) hotend heating assembly for the X2D\u003cbr\u003e• Heats the primary printing nozzle during all print operations\u003cbr\u003e• Quick-clamp design allows rapid hotend replacement\u003cbr\u003e• Precision OEM construction for consistent thermal performance\u003cbr\u003e• Direct replacement for the factory-installed heating assembly\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e• Bambu Lab X2D\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This heating assembly is designed for the \u003cstrong\u003eleft (primary) hotend only\u003c\/strong\u003e. For the auxiliary (right) hotend, use the corresponding \u003cstrong\u003eFAH058 Right Auxiliary Hotend Heating Assembly\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon signs of replacement\u003c\/h2\u003e\n\u003cp\u003e• Left hotend fails to heat\u003cbr\u003e• Heating temperature errors or thermal faults\u003cbr\u003e• Primary nozzle cannot maintain printing temperature\u003cbr\u003e• Physical damage to the heater assembly or wiring\u003cbr\u003e• Intermittent heating or extrusion issues during printing\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cp\u003e• Left Hotend Heating Assembly ×1\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003e• Power off and unplug the printer before servicing\u003cbr\u003e• Allow the hotend to cool completely before removal\u003cbr\u003e• Release the quick-clamp mechanism and replace the heating assembly following the official Bambu Lab procedure\u003cbr\u003e• Ensure the heater connector is fully seated before reassembly\u003cbr\u003e• Run a hotend self-test after installation to verify proper heating performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cp\u003e• Part Number: FAH057\u003cbr\u003e• Product Type: Left Hotend Heating Assembly\u003cbr\u003e• Printer Compatibility: Bambu Lab X2D\u003cbr\u003e• Quick-release clamping design for fast hotend replacement\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h2\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Winnipeg: free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available with knowledgeable local support\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePolicy snapshot\u003c\/h2\u003e\n\u003cp\u003eReplacement parts and electronic\/mechanical components are final sale once installed. Approved returns must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":43491055042623,"sku":"FAH057","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/FAH057_018e37e9-264f-435b-8abe-0503b27e5883.png?v=1783190628"},{"product_id":"bambu-lab-e1-air-purifier","title":"Bambu Lab E1 Air Purifier","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER NOW — ETA TBD.\u003c\/strong\u003e We'll let you know as soon as stock lands at Convoy-Westcan.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab E1 Air Purifier — Fume Capture at the Source\u003c\/h2\u003e\n\u003cp\u003eThe E1 connects directly to your printer's chamber and pulls fumes out the moment they're generated, before they reach the room. Three-stage filtration (pre-filter, HEPA and 40 mm activated carbon) captures particles down to 0.3 μm at up to 99.97% efficiency and adsorbs odours. It starts automatically when a print begins and keeps running afterwards to clear the chamber.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the E1\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eUp to 99.97% filtration\u003c\/strong\u003e at 0.3 μm\u003cbr\u003e• \u003cstrong\u003eQuiet:\u003c\/strong\u003e as low as 38 dB in Quiet Mode\u003cbr\u003e• \u003cstrong\u003eAuto mode\u003c\/strong\u003e matches extraction to each material (H3C \/ H2S \/ H2D \/ P2S with updated firmware)\u003cbr\u003e• \u003cstrong\u003eMonitor and control\u003c\/strong\u003e air quality from Bambu Handy and Bambu Studio\u003cbr\u003e• \u003cstrong\u003eOptional Enhanced Filter\u003c\/strong\u003e for ABS, ASA, PC and PA (sold separately)\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eSize:\u003c\/strong\u003e 261 × 182 × 345.5 mm\u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 kg\u003cbr\u003e• \u003cstrong\u003eHousing:\u003c\/strong\u003e ABS\u003cbr\u003e• \u003cstrong\u003eHose:\u003c\/strong\u003e PP, 60 mm inner diameter\u003cbr\u003e• \u003cstrong\u003eBest with:\u003c\/strong\u003e PLA, PETG, TPU; mitigates ABS, ASA, PC, PA\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eH3C, H2D \/ H2S, H2C, X2D, X1 Series, P1 Series, P2S and P2SC. Other enclosed printers run in Manual Mode. An adapter piece (printed on your own printer) is needed for installation; models are on the Bambu Lab Wiki.\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":44389785665599,"sku":"SP002-US","price":269.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/di1.jpg?v=1793820543"}],"url":"https:\/\/convoywestcan.ca\/collections\/bambu-lab-x2d.oembed","provider":"Convoy-Westcan 3D Printers, Industrial Supplies \u0026 Fasteners","version":"1.0","type":"link"}