{"title":"Deals","description":"\u003cp\u003eEverything marked down right now, in one place: sale printers, combos, filament and parts. This page updates itself whenever a price is cut. Convoy-Westcan, Winnipeg (\u003cstrong\u003ecw3d.ca\u003c\/strong\u003e); same-day pickup or ship Canada-wide.\u003c\/p\u003e","products":[{"product_id":"bambu-lab-a1-3d-printer","title":"Bambu Lab A1 3D Printer","description":"\u003ch2\u003eBambu Lab A1 — Ready Today, Expand to 16-Color Printing Tomorrow\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 is a fast, reliable desktop 3D printer built around a large 256 × 256 × 256 mm build volume and a true “just works” experience. Before every print, the A1 performs full automatic calibration—bed leveling, Z-offset, vibration and flow compensation, and belt tensioning—so you get consistent results without manual tuning.\u003c\/p\u003e\n\u003cp\u003eA 300 °C all-metal hotend and a heated bed up to 100 °C make the A1 ideal for everyday materials like PLA, PETG, TPU, and PVA, delivering clean surfaces and dependable adhesion. Advanced motion control, active flow-rate compensation, and motor noise cancelling help produce sharp details while keeping operation quiet. A built-in camera supports basic monitoring and timelapse capture.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMulti-Color \u0026amp; Multi-Material Options (Non-Combo Unit)\u003c\/h3\u003e\n\u003cp\u003e• Prints single-color out of the box\u003cbr\u003e• Add \u003cstrong\u003eAMS Lite\u003c\/strong\u003e for up to \u003cstrong\u003e4-color printing\u003c\/strong\u003e\u003cbr\u003e• Compatible with \u003cstrong\u003eAMS, AMS 2 Pro, and AMS HT\u003c\/strong\u003e via the \u003cstrong\u003eFilament Hub – A1 Series\u003c\/strong\u003e\u003cbr\u003e• Supports up to \u003cstrong\u003e16\u003c\/strong\u003e\u003cstrong\u003e colors\u003c\/strong\u003e when configured with multiple AMS units\u003cbr\u003e• Proper hub, buffer, and filament routing required for multi-AMS setups\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e• Large 256 × 256 × 256 mm build volume in a rigid, compact frame\u003cbr\u003e• Full auto-calibration before every print\u003cbr\u003e• One-clip quick-swap nozzle for fast maintenance\u003cbr\u003e• Active flow-rate control and intelligent motion tuning\u003cbr\u003e• Quiet printing with motor noise cancelling\u003cbr\u003e• Built-in camera for monitoring and timelapse\u003cbr\u003e• Automatic filament loading, runout detection, and power-loss recovery\u003cbr\u003e• Reinforced heatbed cable assembly for long-term durability\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Summary\u003c\/h3\u003e\n\u003cp\u003e• Hotend: all-metal, up to 300 °C\u003cbr\u003e• Nozzle: 0.4 mm stainless steel (supports 0.2 \/ 0.6 \/ 0.8 mm)\u003cbr\u003e• Build plate: textured PEI included, max 100 °C\u003cbr\u003e• Max speed: up to 500 mm\/s\u003cbr\u003e• Max acceleration: 10,000 mm\/s²\u003cbr\u003e• Supported materials: PLA, PETG, TPU, PVA\u003cbr\u003e• Not recommended: ABS, ASA, PC, PA (nylon), PET, carbon or glass-fiber composites\u003cbr\u003e• Camera: low frame rate, up to 1080p with timelapse\u003cbr\u003e• Printer size: approx. 385 × 410 × 430 mm\u003cbr\u003e• Net weight: approx. 8.3 kg\u003cbr\u003e• Shipping weight: approx. 13 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003e• Bambu Lab A1 printer with 0.4 mm nozzle pre-installed\u003cbr\u003e• Textured PEI build plate\u003cbr\u003e• Purge wiper\u003cbr\u003e• PTFE tube\u003cbr\u003e• Spool holder\u003cbr\u003e• Sample filament (~20 g, random color)\u003cbr\u003e• Tool and accessory kit\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003e• Makers who want a large build volume with minimal setup\u003cbr\u003e• Schools and offices needing reliable, low-maintenance printing\u003cbr\u003e• Print farms planning to scale into multi-color production workflows\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eLocal Advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock (after order processing)\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• Insured and palletized shipping options available\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePolicy Snapshot\u003c\/h3\u003e\n\u003cp\u003e3D printers, AMS units, and filament are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be unused and unopened. Restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003060981823,"sku":"PF002-A-CA","price":339.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/A1-compressed.jpg?v=1793391961"},{"product_id":"bambu-lab-a1-mini-3d-printer","title":"Bambu Lab A1 Mini 3D Printer","description":"\u003ch2\u003eBambu Lab A1 Mini — Compact, Quiet, and Now Multi-AMS Ready\u003c\/h2\u003e\n\u003cp\u003eThe A1 Mini is a compact desktop 3D printer built for true plug-and-print reliability. It arrives fully assembled and performs complete automatic calibration before every print, including bed leveling, Z-offset, vibration and flow compensation, and belt tensioning. This removes setup guesswork and delivers consistent results with minimal user intervention.\u003c\/p\u003e\n\u003cp\u003eWith a 180 × 180 × 180 mm build volume, a 300 °C all-metal hotend, and an 80 °C heated bed, the A1 Mini is well suited for everyday materials such as PLA, PETG, TPU, and PVA. Advanced motion control, active flow-rate compensation, and motor noise cancelling help produce clean details while keeping operation quiet. A built-in camera enables basic monitoring and timelapse recording.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMulti-Color \u0026amp; Multi-Material Options\u003c\/h3\u003e\n\u003cp\u003e• Single-color printing out of the box (non-Combo version)\u003cbr\u003e• Supports \u003cstrong\u003eAMS Lite\u003c\/strong\u003e for up to \u003cstrong\u003e4-color printing\u003c\/strong\u003e\u003cbr\u003e• Supports \u003cstrong\u003eAMS, AMS 2 Pro, and AMS HT\u003c\/strong\u003e via the \u003cstrong\u003eFilament Hub – A1 Series\u003c\/strong\u003e\u003cbr\u003e• Up to \u003cstrong\u003e16 colors\u003c\/strong\u003e possible when configured with multiple AMS units\u003cbr\u003e• Proper filament routing and hub configuration required for multi-AMS setups\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e• Fully automatic calibration before every print\u003cbr\u003e• Compact 180 × 180 × 180 mm build volume\u003cbr\u003e• All-metal hotend rated to 300 °C\u003cbr\u003e• Heated bed up to 80 °C\u003cbr\u003e• Active flow-rate and vibration compensation\u003cbr\u003e• Quiet operation with motor noise cancelling\u003cbr\u003e• Built-in camera for monitoring and timelapse\u003cbr\u003e• Auto filament loading, runout detection, and power-loss recovery\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Summary\u003c\/h3\u003e\n\u003cp\u003e• Nozzle: 0.4 mm stainless steel (supports 0.2 \/ 0.6 \/ 0.8 mm)\u003cbr\u003e• Max speed: up to 500 mm\/s\u003cbr\u003e• Max acceleration: 10,000 mm\/s²\u003cbr\u003e• Supported materials: PLA, PETG, TPU, PVA\u003cbr\u003e• Not recommended: ABS, ASA, PC, PA (nylon), PET, carbon or glass fiber composites\u003cbr\u003e• Build plate: textured PEI (smooth optional)\u003cbr\u003e• Printer size: approx. 347 × 315 × 365 mm\u003cbr\u003e• Net weight: approx. 5.5 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003e• A1 Mini printer with 0.4 mm nozzle pre-installed\u003cbr\u003e• Textured PEI build plate\u003cbr\u003e• Purge wiper\u003cbr\u003e• PTFE tube\u003cbr\u003e• Spool holder\u003cbr\u003e• Sample filament (~20 g, random color)\u003cbr\u003e• Tool and accessory kit\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003e• Makers who want a small, quiet, low-maintenance printer\u003cbr\u003e• Classrooms and offices prioritizing reliability and ease of use\u003cbr\u003e• Users planning to expand into multi-color or multi-material printing\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eLocal Advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock (after processing)\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• Insured and palletized shipping options available\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePolicy Snapshot\u003c\/h3\u003e\n\u003cp\u003e3D printers, AMS units, and filament are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be unused and unopened. Restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003060949055,"sku":"PF002-M-CA","price":249.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5d77312d-c2b932f89d43482b9daead6bf7c518d5-scaled.jpg?v=1793391961"},{"product_id":"bambu-lab-ams-lite-automatic-material-system","title":"Bambu Lab AMS lite - Automatic Material System","description":"\u003ch2 data-start=\"186\" data-end=\"252\"\u003eBambu Lab AMS Lite — Simple, Reliable Multi-Color for A1 Series\u003c\/h2\u003e\n\u003cp data-start=\"254\" data-end=\"518\"\u003eAMS Lite adds easy, dependable 4-spool multi-color and multi-material printing to the A1 and A1 mini. It is lightweight, quiet, and quick to set up—well suited for classrooms, makerspaces, offices, and home users who want color capability without added complexity.\u003c\/p\u003e\n\u003cp data-start=\"520\" data-end=\"717\"\u003eAMS Lite automatically switches filaments during a print, helps keep spools feeding smoothly, and can sync filament profiles when used with compatible RFID spools for faster setup and fewer errors.\u003c\/p\u003e\n\u003chr data-start=\"719\" data-end=\"722\"\u003e\n\u003ch3 data-start=\"724\" data-end=\"747\"\u003eWhy Choose AMS Lite\u003c\/h3\u003e\n\u003cp data-start=\"748\" data-end=\"1048\"\u003e• 4-spool capacity for multi-color or multi-material printing\u003cbr data-start=\"809\" data-end=\"812\"\u003e• Automatic filament switching during prints\u003cbr data-start=\"856\" data-end=\"859\"\u003e• Lightweight rotary spool holders for smooth, low-resistance feeding\u003cbr data-start=\"928\" data-end=\"931\"\u003e• Quiet operation with a compact desktop footprint\u003cbr data-start=\"981\" data-end=\"984\"\u003e• RFID support on compatible spools for quick profile matching\u003c\/p\u003e\n\u003chr data-start=\"1050\" data-end=\"1053\"\u003e\n\u003ch3 data-start=\"1055\" data-end=\"1084\"\u003eCompatibility — Important\u003c\/h3\u003e\n\u003cp data-start=\"1085\" data-end=\"1389\"\u003e• Designed exclusively for \u003cstrong data-start=\"1112\" data-end=\"1130\"\u003eA1 and A1 mini\u003c\/strong\u003e\u003cbr data-start=\"1130\" data-end=\"1133\"\u003e• Supports \u003cstrong data-start=\"1144\" data-end=\"1172\"\u003eone AMS Lite per printer\u003c\/strong\u003e\u003cbr data-start=\"1172\" data-end=\"1175\"\u003e• \u003cstrong data-start=\"1177\" data-end=\"1195\"\u003eNot compatible\u003c\/strong\u003e with X1, P1, or P2 series printers\u003cbr data-start=\"1230\" data-end=\"1233\"\u003e• Other AMS systems require a separate filament hub when used with A1\/A1 mini\u003cbr data-start=\"1310\" data-end=\"1313\"\u003e• Mixing AMS Lite with other AMS units on the same system is not supported\u003c\/p\u003e\n\u003chr data-start=\"1391\" data-end=\"1394\"\u003e\n\u003ch3 data-start=\"1396\" data-end=\"1417\"\u003eTypical Use Cases\u003c\/h3\u003e\n\u003cp data-start=\"1418\" data-end=\"1639\"\u003e• Multi-color logos, labels, and decorative parts\u003cbr data-start=\"1467\" data-end=\"1470\"\u003e• Classroom demonstrations and student projects\u003cbr data-start=\"1517\" data-end=\"1520\"\u003e• Small print farms seeking simple, low-maintenance workflows\u003cbr data-start=\"1581\" data-end=\"1584\"\u003e• Multi-material prints without manual filament swaps\u003c\/p\u003e\n\u003chr data-start=\"1641\" data-end=\"1644\"\u003e\n\u003ch3 data-start=\"1646\" data-end=\"1677\"\u003eWhat’s in the Box (Typical)\u003c\/h3\u003e\n\u003cp data-start=\"1678\" data-end=\"1800\"\u003e• AMS Lite main unit\u003cbr data-start=\"1698\" data-end=\"1701\"\u003e• Stand\u003cbr data-start=\"1708\" data-end=\"1711\"\u003e• Rotary spool holders ×4\u003cbr data-start=\"1736\" data-end=\"1739\"\u003e• PTFE tubing and required cables\u003cbr data-start=\"1772\" data-end=\"1775\"\u003e• Quick-start materials\u003c\/p\u003e\n\u003cp data-start=\"1802\" data-end=\"1861\"\u003e(Contents may vary slightly by region or production batch.)\u003c\/p\u003e\n\u003chr data-start=\"1863\" data-end=\"1866\"\u003e\n\u003ch3 data-start=\"1868\" data-end=\"1882\"\u003eSetup Tips\u003c\/h3\u003e\n\u003cp data-start=\"1883\" data-end=\"2070\"\u003e• Keep PTFE paths short and smooth for best reliability\u003cbr data-start=\"1938\" data-end=\"1941\"\u003e• Use the included spool holders to minimize drag\u003cbr data-start=\"1990\" data-end=\"1993\"\u003e• Follow recommended feeding guidelines for flexible or specialty filaments\u003c\/p\u003e\n\u003chr data-start=\"2072\" data-end=\"2075\"\u003e\n\u003ch3 data-start=\"2077\" data-end=\"2096\"\u003ePolicy Snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2097\" data-end=\"2271\"\u003eAMS Lite, 3D printers, and filament are \u003cstrong data-start=\"2137\" data-end=\"2151\"\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be brand new and unopened. Restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003061080127,"sku":"SA005","price":229.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5d7a42b2-20231215-121309.jpg?v=1767373621"},{"product_id":"bambu-lab-p1s-3d-printer","title":"Bambu Lab P1S 3D Printer","description":"\u003ch2\u003eBambu Lab P1S — Enclosed, Fast, and Consistent\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P1S is a refined P-series workhorse that combines a fully enclosed chamber with upgraded cooling and filtration for dependable, repeatable results. It delivers fast print speeds, stable thermal performance, and broad material compatibility, making it an excellent choice for everyday printing, functional parts, and light engineering applications.\u003c\/p\u003e\n\u003cp\u003eWith a 256 × 256 × 256 mm build volume, a 300 °C all-metal hotend, and a 100 °C heated bed, the P1S provides the core performance most users need, while the enclosure helps stabilize prints and reduce odors compared to open-frame machines.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cp\u003e• Fully enclosed chamber with activated-carbon filtration\u003cbr\u003e• Multi-fan cooling system for stable, high-speed printing\u003cbr\u003e• Rigid CoreXY motion system for speed and consistency\u003cbr\u003e• 300 °C all-metal hotend and 100 °C heated bed\u003cbr\u003e• Integrated chamber camera for monitoring and timelapse\u003cbr\u003e• Seamless workflow via Bambu Studio and Bambu Handy (LAN or Cloud)\u003c\/p\u003e\n\u003ch3\u003eTechnical overview\u003c\/h3\u003e\n\u003cp\u003e• Build volume: 256 × 256 × 256 mm\u003cbr\u003e• Nozzle: 0.4 mm \u003cstrong\u003estainless steel \u003c\/strong\u003e(included)\u003cbr\u003e• Supported nozzle sizes: 0.2 mm, 0.6 mm, 0.8 mm\u003cbr\u003e• Build plate: PEI-compatible (varies by package\/region)\u003cbr\u003e• Maximum speed: up to 500 mm\/s\u003cbr\u003e• Maximum acceleration: up to 20,000 mm\/s²\u003cbr\u003e• Camera: Chamber camera (low frame rate) with timelapse\u003cbr\u003e• Approx. size: 389 × 389 × 458 mm\u003cbr\u003e• Approx. weight: ~13 kg (bundle-dependent)\u003c\/p\u003e\n\u003ch3\u003eAMS and multi-color compatibility\u003c\/h3\u003e\n\u003cp\u003e• Ships as a single-color printer (non-Combo version)\u003cbr\u003e• Fully compatible with AMS for multi-color or multi-material printing\u003cbr\u003e• Supports newer AMS options (such as AMS 2 Pro) with the correct hub or buffer\u003cbr\u003e• Multi-AMS setups require proper routing and hub configuration\u003c\/p\u003e\n\u003ch3\u003eWhat’s included (typical non-Combo)\u003c\/h3\u003e\n\u003cp\u003e• P1S printer with 0.4 mm stainless nozzle pre-installed\u003cbr\u003e• PEI build plate (type may vary by region or package)\u003cbr\u003e• Spool holder and PTFE tube\u003cbr\u003e• Basic tools and accessories\u003c\/p\u003e\n\u003cp\u003eContents may vary slightly by shipment; please confirm at purchase.\u003c\/p\u003e\n\u003ch3\u003eWho the P1S is for\u003c\/h3\u003e\n\u003cp\u003e• Makers who want fast, enclosed, low-hassle printing\u003cbr\u003e• Small shops, classrooms, or offices needing better airflow control\u003cbr\u003e• Print farms standardizing on a reliable P-series platform\u003cbr\u003e• Users planning future AMS expansion\u003c\/p\u003e\n\u003ch3\u003eLocal advantages — Convoy-Westcan (Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock (after order processing)\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• Palletized and insured shipping available for heavier or remote deliveries\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003061145663,"sku":"PF001-U-CA","price":479.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/47138f34-2_d9951a51-653c-4891-bf08-b9aec84d7613.jpg?v=1767372365"},{"product_id":"bambu-reusable-spool","title":"Bambu Reusable Spool","description":"\u003ch3 data-start=\"198\" data-end=\"235\"\u003e\u003cstrong data-start=\"202\" data-end=\"235\"\u003eBambu Reusable Spool (RSP001)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"237\" data-end=\"376\"\u003eReusable filament spool designed for Bambu Lab refill filaments, reducing waste while maintaining consistent feeding and AMS compatibility.\u003c\/p\u003e\n\u003chr data-start=\"378\" data-end=\"381\"\u003e\n\u003cp data-start=\"383\" data-end=\"612\"\u003e\u003cstrong data-start=\"383\" data-end=\"395\"\u003eOverview\u003c\/strong\u003e\u003cbr data-start=\"395\" data-end=\"398\"\u003eThe Bambu Reusable Spool allows users to mount Bambu refill filaments quickly and securely. It is designed for repeated use, easy assembly, and reliable filament feeding in both standalone printers and AMS systems.\u003c\/p\u003e\n\u003cp data-start=\"614\" data-end=\"709\"\u003eThe spool locks together firmly to prevent slipping, wobble, or uneven winding during printing.\u003c\/p\u003e\n\u003chr data-start=\"711\" data-end=\"714\"\u003e\n\u003cp data-start=\"716\" data-end=\"740\"\u003e\u003cstrong data-start=\"716\" data-end=\"738\"\u003eAvailable Versions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"741\" data-end=\"821\"\u003e\n\u003cli data-start=\"741\" data-end=\"781\"\u003e\n\u003cp data-start=\"743\" data-end=\"781\"\u003e\u003cstrong data-start=\"743\" data-end=\"771\"\u003eLow Temperature (≤70 °C)\u003c\/strong\u003e – White\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"782\" data-end=\"821\"\u003e\n\u003cp data-start=\"784\" data-end=\"821\"\u003e\u003cstrong data-start=\"784\" data-end=\"813\"\u003eHigh Temperature (≤90 °C)\u003c\/strong\u003e – Black\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"823\" data-end=\"826\"\u003e\n\u003cp data-start=\"828\" data-end=\"855\"\u003e\u003cstrong data-start=\"828\" data-end=\"853\"\u003eMaterial Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"856\" data-end=\"947\"\u003e\n\u003cli data-start=\"856\" data-end=\"881\"\u003e\n\u003cp data-start=\"858\" data-end=\"881\"\u003eLow Temp version: ABS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"882\" data-end=\"947\"\u003e\n\u003cp data-start=\"884\" data-end=\"947\"\u003eHigh Temp version: ABS + PC blend for increased heat resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"949\" data-end=\"952\"\u003e\n\u003cp data-start=\"954\" data-end=\"982\"\u003e\u003cstrong data-start=\"954\" data-end=\"980\"\u003eFilament Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"983\" data-end=\"1113\"\u003e\n\u003cli data-start=\"983\" data-end=\"1018\"\u003e\n\u003cp data-start=\"985\" data-end=\"1018\"\u003e\u003cstrong data-start=\"985\" data-end=\"1006\"\u003eLow Temp Version:\u003c\/strong\u003e PLA, PETG\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1019\" data-end=\"1113\"\u003e\n\u003cp data-start=\"1021\" data-end=\"1113\"\u003e\u003cstrong data-start=\"1021\" data-end=\"1043\"\u003eHigh Temp Version:\u003c\/strong\u003e PLA, PETG, ABS, ASA, PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, PC, TPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1115\" data-end=\"1118\"\u003e\n\u003cp data-start=\"1120\" data-end=\"1138\"\u003e\u003cstrong data-start=\"1120\" data-end=\"1136\"\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1139\" data-end=\"1333\"\u003e\n\u003cli data-start=\"1139\" data-end=\"1178\"\u003e\n\u003cp data-start=\"1141\" data-end=\"1178\"\u003eReusable, eco-friendly spool system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1179\" data-end=\"1207\"\u003e\n\u003cp data-start=\"1181\" data-end=\"1207\"\u003eSecure twist-lock design\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1208\" data-end=\"1250\"\u003e\n\u003cp data-start=\"1210\" data-end=\"1250\"\u003eStable feeding for high-speed printing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1251\" data-end=\"1290\"\u003e\n\u003cp data-start=\"1253\" data-end=\"1290\"\u003eFully compatible with Bambu Lab AMS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1291\" data-end=\"1333\"\u003e\n\u003cp data-start=\"1293\" data-end=\"1333\"\u003eDesigned for Bambu refill filament cores\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1335\" data-end=\"1338\"\u003e\n\u003cp data-start=\"1340\" data-end=\"1360\"\u003e\u003cstrong data-start=\"1340\" data-end=\"1358\"\u003eAssembly Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1361\" data-end=\"1576\"\u003e\n\u003cli data-start=\"1361\" data-end=\"1415\"\u003e\n\u003cp data-start=\"1363\" data-end=\"1415\"\u003eIncludes wide ring, narrow ring, and spacing shims\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1416\" data-end=\"1463\"\u003e\n\u003cp data-start=\"1418\" data-end=\"1463\"\u003eSpool locks together with a clockwise twist\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1464\" data-end=\"1523\"\u003e\n\u003cp data-start=\"1466\" data-end=\"1523\"\u003eSpacing shims must be installed before loading filament\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1524\" data-end=\"1576\"\u003e\n\u003cp data-start=\"1526\" data-end=\"1576\"\u003ePlastic shipping strips must be removed before use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1578\" data-end=\"1581\"\u003e\n\u003cp data-start=\"1583\" data-end=\"1603\"\u003e\u003cstrong data-start=\"1583\" data-end=\"1601\"\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1604\" data-end=\"1711\"\u003e\n\u003cli data-start=\"1604\" data-end=\"1630\"\u003e\n\u003cp data-start=\"1606\" data-end=\"1630\"\u003eSpool Diameter: 200 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1631\" data-end=\"1647\"\u003e\n\u003cp data-start=\"1633\" data-end=\"1647\"\u003eWidth: 67 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1648\" data-end=\"1665\"\u003e\n\u003cp data-start=\"1650\" data-end=\"1665\"\u003eWeight: 250 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1666\" data-end=\"1711\"\u003e\n\u003cp data-start=\"1668\" data-end=\"1711\"\u003eColor: White (Low Temp) \/ Black (High Temp)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003061178431,"sku":"RSP001","price":5.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/e371e5c6-20230830-101526_800x_7937d830-df8b-48ac-a482-73552e08d91d.webp?v=1757004387"},{"product_id":"pa6-gf","title":"PA6-GF","description":"\u003ch2 data-start=\"0\" data-end=\"70\"\u003ePA6-GF Filament — Glass Fiber Reinforced Nylon for Industrial Parts\u003c\/h2\u003e\n\u003cp data-start=\"72\" data-end=\"358\"\u003ePA6-GF is a high-performance engineering filament made from Nylon 6 reinforced with glass fiber. It is engineered for strength, durability, and dimensional stability, making it ideal for functional and industrial parts that must withstand heat, mechanical stress, and chemical exposure.\u003c\/p\u003e\n\u003cp data-start=\"360\" data-end=\"548\"\u003eCompared to standard nylon, PA6-GF offers reduced warping, higher stiffness, and improved dimensional accuracy, while remaining more cost-effective than many premium engineering materials.\u003c\/p\u003e\n\u003ch3 data-start=\"550\" data-end=\"566\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"568\" data-end=\"894\"\u003e• Glass fiber reinforced for high strength and stiffness\u003cbr data-start=\"624\" data-end=\"627\"\u003e• Excellent dimensional stability with reduced warping\u003cbr data-start=\"681\" data-end=\"684\"\u003e• High heat resistance for demanding environments\u003cbr data-start=\"733\" data-end=\"736\"\u003e• Strong chemical and oil resistance\u003cbr data-start=\"772\" data-end=\"775\"\u003e• Smooth surface finish with reduced visible layer lines\u003cbr data-start=\"831\" data-end=\"834\"\u003e• Available in multiple colors\u003cbr data-start=\"864\" data-end=\"867\"\u003e• Reusable spool included\u003c\/p\u003e\n\u003ch3 data-start=\"896\" data-end=\"913\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"915\" data-end=\"1145\"\u003e• Printers: Most enclosed 1.75 mm FDM printers\u003cbr data-start=\"961\" data-end=\"964\"\u003e• Nozzles: Hardened steel 0.4 mm, 0.6 mm recommended, 0.8 mm\u003cbr data-start=\"1024\" data-end=\"1027\"\u003e• Build plates: Engineering Plate, High Temperature Plate, Textured PEI\u003cbr data-start=\"1098\" data-end=\"1101\"\u003e• AMS: Compatible\u003cbr data-start=\"1118\" data-end=\"1121\"\u003e• AMS Lite: Compatible\u003c\/p\u003e\n\u003ch3 data-start=\"1147\" data-end=\"1183\"\u003eNot compatible \/ not recommended\u003c\/h3\u003e\n\u003cp data-start=\"1185\" data-end=\"1246\"\u003e• 0.2 mm nozzles\u003cbr data-start=\"1201\" data-end=\"1204\"\u003e• Stainless steel nozzles\u003cbr data-start=\"1229\" data-end=\"1232\"\u003e• Cool Plate\u003c\/p\u003e\n\u003ch3 data-start=\"1248\" data-end=\"1290\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1292\" data-end=\"1598\"\u003e• Nozzle: 260–290 °C\u003cbr data-start=\"1312\" data-end=\"1315\"\u003e• Bed: 80–100 °C (with glue)\u003cbr data-start=\"1343\" data-end=\"1346\"\u003e• Dry thoroughly before printing (nylon is highly moisture sensitive)\u003cbr data-start=\"1415\" data-end=\"1418\"\u003e• Enclosed printer strongly recommended\u003cbr data-start=\"1457\" data-end=\"1460\"\u003e• Printed parts may gain additional toughness after moisture conditioning\u003cbr data-start=\"1533\" data-end=\"1536\"\u003e• Storage: Keep sealed and dry with desiccant (below 20% RH)\u003c\/p\u003e\n\u003ch3 data-start=\"1600\" data-end=\"1621\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1623\" data-end=\"1675\"\u003e• PA6-GF filament spool × 1\u003cbr data-start=\"1650\" data-end=\"1653\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1677\" data-end=\"1696\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1698\" data-end=\"1857\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Blue (72600)","offer_id":42003062489151,"sku":"72600","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Orange (72200)","offer_id":42003062521919,"sku":"72200","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"White (72102)","offer_id":42003062554687,"sku":"72102","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Gray (72103)","offer_id":42003062587455,"sku":"72103","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Black (72104)","offer_id":42003062620223,"sku":"72104","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Yellow (72400)","offer_id":42442984882239,"sku":"72400","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Lime (72500)","offer_id":42442985373759,"sku":"72500","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"Brown (72800)","offer_id":42442985898047,"sku":"72800","price":58.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/7a3d6f28-JP35952-scaled.jpg?v=1793389105"},{"product_id":"petg-translucent","title":"PETG Translucent","description":"\u003ch2 data-start=\"0\" data-end=\"67\"\u003ePETG Translucent Filament — High Clarity, Reliable PETG Printing\u003c\/h2\u003e\n\u003cp data-start=\"69\" data-end=\"388\"\u003ePETG Translucent is a specially tuned PETG filament designed to deliver high translucency with clean, reliable printing. Compared to standard PETG, it reduces common issues such as stringing, clumping, nozzle sticking, and material leakage, making it easier to print while maintaining excellent strength and durability.\u003c\/p\u003e\n\u003cp data-start=\"390\" data-end=\"591\"\u003eThis filament is well suited for light-diffusing parts, decorative prints, outdoor applications, and functional components where impact resistance, weather resistance, and visual clarity are important.\u003c\/p\u003e\n\u003ch3 data-start=\"593\" data-end=\"609\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"611\" data-end=\"898\"\u003e• Translucent appearance with excellent light transmission\u003cbr data-start=\"669\" data-end=\"672\"\u003e• Reduced stringing and clumping compared to standard PETG\u003cbr data-start=\"730\" data-end=\"733\"\u003e• Strong, flexible, and impact resistant\u003cbr data-start=\"773\" data-end=\"776\"\u003e• Water resistant, UV resistant, and weather durable\u003cbr data-start=\"828\" data-end=\"831\"\u003e• Minimal warping for reliable prints\u003cbr data-start=\"868\" data-end=\"871\"\u003e• Reusable spool included\u003c\/p\u003e\n\u003ch3 data-start=\"900\" data-end=\"917\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"919\" data-end=\"1052\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"956\" data-end=\"959\"\u003e• Build plates: Engineering Plate, High Temperature Plate, Textured PEI\u003cbr data-start=\"1030\" data-end=\"1033\"\u003e• AMS: Compatible\u003c\/p\u003e\n\u003ch3 data-start=\"1054\" data-end=\"1073\"\u003eNot recommended\u003c\/h3\u003e\n\u003cp data-start=\"1075\" data-end=\"1089\"\u003e• Cool Plate\u003c\/p\u003e\n\u003ch3 data-start=\"1091\" data-end=\"1133\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1135\" data-end=\"1375\"\u003e• Nozzle: 230–260 °C\u003cbr data-start=\"1155\" data-end=\"1158\"\u003e• Bed: 65–75 °C, use \u003cstrong\u003eMagigoo\u003c\/strong\u003e \u003cspan style=\"text-decoration: underline;\"\u003efor a release agent\u003c\/span\u003e\u003cbr data-start=\"1185\" data-end=\"1188\"\u003e• Dry thoroughly before printing (material is moisture sensitive)\u003cbr data-start=\"1253\" data-end=\"1256\"\u003e• Transparency varies with wall thickness, infill, and print settings\u003cbr data-start=\"1325\" data-end=\"1328\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1377\" data-end=\"1398\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1400\" data-end=\"1462\"\u003e• PETG Translucent filament spool × 1\u003cbr data-start=\"1437\" data-end=\"1440\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1464\" data-end=\"1483\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1485\" data-end=\"1644\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Translucent Teal (32501) \/ Refill","offer_id":42003062882367,"sku":"32501 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Clear (32101) \/ Filament with spool","offer_id":42003062915135,"sku":"32101","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Gray (32100) \/ Refill","offer_id":42003062947903,"sku":"32100 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Olive (32500) \/ Refill","offer_id":42003062980671,"sku":"32500 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Orange (32300) \/ Refill","offer_id":42003063013439,"sku":"32300 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Purple (32700) \/ Refill","offer_id":42003063046207,"sku":"32700 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Light Blue (32600) \/ Refill","offer_id":42003063078975,"sku":"32600 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Clear (32101) \/ Refill","offer_id":42003063111743,"sku":"32101 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Pink (32200) \/ Refill","offer_id":42003063144511,"sku":"32200 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Brown (32800) \/ Refill","offer_id":42003063177279,"sku":"32800 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Translucent Light Blue (32600) \/ Filament with spool","offer_id":42811213381695,"sku":"32600","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/6d6ba394-JP34971-scaled.jpg?v=1793389105"},{"product_id":"pla-basic-gradient","title":"PLA Basic Gradient","description":"\u003ch2 data-start=\"0\" data-end=\"75\"\u003ePLA Basic Gradient Filament — Smooth Color Transition, Easy PLA Printing\u003c\/h2\u003e\n\u003cp data-start=\"77\" data-end=\"344\"\u003ePLA Basic Gradient is a decorative PLA filament designed to produce a smooth two-color gradient throughout a print. The gradual color transition becomes more visible as the print progresses, creating an eye-catching effect that works especially well on larger models.\u003c\/p\u003e\n\u003cp data-start=\"346\" data-end=\"460\"\u003eIt prints with the same ease, reliability, and low-warp behavior as standard PLA, with no special tuning required.\u003c\/p\u003e\n\u003ch3 data-start=\"462\" data-end=\"478\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"480\" data-end=\"612\"\u003e• Smooth bi-color gradient transition\u003cbr data-start=\"517\" data-end=\"520\"\u003e• Soft, visually appealing finish\u003cbr data-start=\"553\" data-end=\"556\"\u003e• Prints like standard PLA\u003cbr data-start=\"582\" data-end=\"585\"\u003e• Reusable spool included\u003c\/p\u003e\n\u003ch3 data-start=\"614\" data-end=\"631\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"633\" data-end=\"782\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"670\" data-end=\"673\"\u003e• AMS: Compatible\u003cbr data-start=\"690\" data-end=\"693\"\u003e• AMS Lite: Compatible\u003cbr data-start=\"715\" data-end=\"718\"\u003e• Build plates: Cool Plate SuperTack, Smooth PEI, Textured PEI\u003c\/p\u003e\n\u003ch3 data-start=\"784\" data-end=\"812\"\u003eNotes on gradient effect\u003c\/h3\u003e\n\u003cp data-start=\"814\" data-end=\"968\"\u003e• Gradient length is approximately 8–10 meters\u003cbr data-start=\"860\" data-end=\"863\"\u003e• Smaller prints may show limited color transition\u003cbr data-start=\"913\" data-end=\"916\"\u003e• Larger prints display a more noticeable gradient\u003c\/p\u003e\n\u003ch3 data-start=\"970\" data-end=\"1012\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1014\" data-end=\"1163\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"1034\" data-end=\"1037\"\u003e• Bed: 35–45 °C, if needed with \u003cstrong\u003eMagigoo\u003c\/strong\u003e\u003cbr data-start=\"1064\" data-end=\"1067\"\u003e• Drying: Optional; dry if moisture is present\u003cbr data-start=\"1113\" data-end=\"1116\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1165\" data-end=\"1186\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1188\" data-end=\"1252\"\u003e• PLA Basic Gradient filament spool × 1\u003cbr data-start=\"1227\" data-end=\"1230\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1254\" data-end=\"1273\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1275\" data-end=\"1434\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Solar Breeze (10901)","offer_id":42003063341119,"sku":"10901","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Ocean to Meadow (10902)","offer_id":42003063373887,"sku":"10902","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Arctic Whisper (10900)","offer_id":42003063406655,"sku":"10900","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Blueberry Bubblegum (10905)","offer_id":42003063439423,"sku":"10905","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Cotton Candy Cloud (10907)","offer_id":42003063472191,"sku":"10907","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Pink Citrus (10903)","offer_id":42003063504959,"sku":"10903","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Mint Lime (10904)","offer_id":42003063537727,"sku":"10904","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Dusk Glare (10906)","offer_id":42003063570495,"sku":"10906","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3b763dc9-b6913f1f16c3d12f5aeb50d42d215580.png?v=1793389162"},{"product_id":"pla-cmyk-lithophane-bundle","title":"PLA CMYK Lithophane Bundle","description":"\u003cmain id=\"main\" role=\"main\"\u003e\n\u003cdiv id=\"shopify-section-template--16745938321648__product-description\" class=\"shopify-section\"\u003e\n\u003csection class=\"Product Product--\"\u003e\n\u003cdiv class=\"ProductMeta__Description\"\u003e\n\u003cdiv class=\"Rte\"\u003e\n\u003cvideo src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/8ecf9e31e68d461f8a1fe0f9b8e08ef9.mp4\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk_bundle_banner.png?v=1683550187\" autoplay=\"autoplay\" loop=\"loop\" muted=\"\" controls=\"controls\" width=\"392\" height=\"196\" data-mce-fragment=\"1\"\u003e\u003c\/video\u003e\n\u003cdiv class=\"sizing-small phase-ready state-playing\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003e\u003cstrong\u003eAcknowledgement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p\" style=\"text-align: left;\"\u003eWe would like to send our sincere thanks to \u003cstrong\u003e\u003ca title=\"Lithophane Maker\" href=\"https:\/\/www.youtube.com\/channel\/UCU13fzqAu4BTAhOSHJgHRqg\" rel=\"noopener\" target=\"_blank\"\u003eLithophane Maker\u003c\/a\u003e\u003c\/strong\u003e, who made great contributions to the lithophane printing groups. It has never been easier to create stunning color lithophanes that will leave a lasting impression with their amazing image-to-stl generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st pct_font-size-mobile-16\"\u003eBring colors to your lithophane\u003c\/h2\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk-bundle-update.jpg\" alt=\"pla\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st pct_font-size-mobile-16\"\u003eMake them into 3D pieces of art\u003c\/h2\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk-bundle-updat-1.jpg\" alt=\"petg-cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003ch2 class=\"pct_t pct_st pct_font-size-mobile-16\"\u003eQuick Walkthrough\u003c\/h2\u003e\n\u003ch3 class=\"pct_st pct_font-size-mobile-14\"\u003e#1 Get your printer ready\u003c\/h3\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" rowspan=\"2\"\u003e\u003cstrong\u003ePrinter with AMS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Lab Printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS (Automatic Material System)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" rowspan=\"4\"\u003e\u003cstrong\u003eFilaments (Hexcode#)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic Cyan #0086D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic Magenta #EC008C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic Yellow #F4EE2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic Jade White #FFFFFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" rowspan=\"2\"\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.2 mm (Recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eor 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\" rowspan=\"3\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Cool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBambu High Temperature Plate (PEI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Dual-Sided Textured PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc pct_padding-in-mobile\"\u003e\n\u003cdiv class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 class=\"pct_st pct_font-size-mobile-14\"\u003e#2 Generate STL files and print\u003c\/h3\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003cdiv class=\"pct_icpc pct_grad-4-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg height=\"285\" width=\"200\" class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk_step_1.png\" alt=\"PLA CMYK\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003e1. Upload your favourite JPG image to Lithophane Maker and configure\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg height=\"252\" width=\"200\" class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk_step_2.png\" alt=\"PLA CMYK\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003e2. Create STL files and download\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg height=\"392\" width=\"200\" class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk_step_3.png\" alt=\"PLA CMYK\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003e3. Set up in Bambu Studio and slice\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg height=\"322\" width=\"200\" class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk_step_8.png\" alt=\"PLA CMYK\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003e4. Load filaments into corresponding AMS slot and print!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003cdiv class=\"pct_icpc pct_grad-1-pc pct_grad-1-mobile\"\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003eFor a step-by-step guide, check out the \u003ca title=\"CMYK Lithophane printing guide\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/CMYK-color-lithophane-printing-instructions%20\" rel=\"noopener\" target=\"_blank\"\u003eCMYK Lithophane Printing Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc pct_padding-in-mobile\"\u003e\n\u003ch3 class=\"pct_st pct_font-size-mobile-14\"\u003e#3 Get the lithophane printed and lighten it up\u003c\/h3\u003e\n\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/cmyk-bundle-8.jpg\" alt=\"PLA CMYK\"\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003eFor more information on \u003ca title=\"CMYK Lithophane printing guide\" href=\"https:\/\/convoywestcan.ca\/product\/bambu-cmyk-led-backlight-board\/\" rel=\"noopener\" target=\"_blank\"\u003eBambu CMYK LED Backlight Board\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-12\"\u003eDownload \u003ca title=\"CMYK Lithophane printing guide\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/CMYK-color-lithophane-printing-instructions%20\" rel=\"noopener\" target=\"_blank\"\u003eFrame and Light Guide Plate\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch2 class=\"pct_st pct_font-size-mobile-16\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-14\"\u003e• Smaller nozzle sizes and lower layer heights are essential to achieve better printing results. We suggest using 0.2mm or 0.4mm nozzle sizes and layer heights between 0.08mm and 0.12mm. Check \u003ca title=\"CMYK Lithophane printing guide\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/CMYK-color-lithophane-printing-instructions\" rel=\"noopener\" target=\"_blank\"\u003eCMYK Lithophane Printing Guide \u003c\/a\u003eon Wiki.\u003c\/p\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-14\"\u003e• Due to the limitations of printing layers and resolution, there may be some color deviation between the actual image and the lithophane prints.\u003c\/p\u003e\n\u003cp class=\"pct_p pct_font-size-mobile-14\"\u003e• To prevent warping, the recommended heated bed temperature is between 45-50℃.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/main\u003e","brand":"Bambu Lab","offers":[{"title":"CMYK Lithophane Bundle","offer_id":42003062652991,"sku":"A00-CMYK-1.75-4000-spl","price":83.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/02e5f831-cmyk2.png?v=1793392174"},{"product_id":"pla-galaxy","title":"PLA Galaxy","description":"\u003ch2 data-start=\"0\" data-end=\"58\"\u003ePLA Galaxy Filament — Glossy Shimmer, Easy PLA Printing\u003c\/h2\u003e\n\u003cp data-start=\"60\" data-end=\"360\"\u003ePLA Galaxy is a decorative PLA filament enhanced with fine glass microsphere additives to produce a glossy, light-reflective shimmer. The finish subtly sparkles and shifts with viewing angle, making it ideal for display models, decorative parts, and aesthetic prints where surface appearance matters.\u003c\/p\u003e\n\u003cp data-start=\"362\" data-end=\"443\"\u003eIt retains the easy handling, reliability, and low-warp behavior of standard PLA.\u003c\/p\u003e\n\u003ch3 data-start=\"445\" data-end=\"461\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"463\" data-end=\"630\"\u003e• Glossy finish with subtle light-reflective shimmer\u003cbr data-start=\"515\" data-end=\"518\"\u003e• Smooth, visually consistent surface from all angles\u003cbr data-start=\"571\" data-end=\"574\"\u003e• Prints like standard PLA\u003cbr data-start=\"600\" data-end=\"603\"\u003e• Reusable spool included\u003c\/p\u003e\n\u003ch3 data-start=\"632\" data-end=\"649\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"651\" data-end=\"862\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"688\" data-end=\"691\"\u003e• Nozzles: Hardened steel 0.4 mm+, stainless steel 0.4 mm\u003cbr data-start=\"748\" data-end=\"751\"\u003e• Build plates: Cool Plate, High Temperature Plate, Textured PEI\u003cbr data-start=\"815\" data-end=\"818\"\u003e• AMS: Compatible\u003cbr data-start=\"835\" data-end=\"838\"\u003e• AMS Lite: Compatible\u003c\/p\u003e\n\u003ch3 data-start=\"864\" data-end=\"883\"\u003eNot recommended\u003c\/h3\u003e\n\u003cp data-start=\"885\" data-end=\"925\"\u003e• 0.2 mm nozzles\u003cbr data-start=\"901\" data-end=\"904\"\u003e• Engineering Plate\u003c\/p\u003e\n\u003ch3 data-start=\"927\" data-end=\"969\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"971\" data-end=\"1071\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"991\" data-end=\"994\"\u003e• Bed: 35–45 °C , if needed with \u003cstrong\u003eMagigoo\u003c\/strong\u003e\u003cbr data-start=\"1021\" data-end=\"1024\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1073\" data-end=\"1094\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1096\" data-end=\"1152\"\u003e• PLA Galaxy filament spool × 1\u003cbr data-start=\"1127\" data-end=\"1130\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1154\" data-end=\"1173\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1175\" data-end=\"1334\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Purple (13602)","offer_id":42003063210047,"sku":"13602","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Green (13503)","offer_id":42003063242815,"sku":"13503","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Nebulae (13504)","offer_id":42003063275583,"sku":"13504","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Brown (13203)","offer_id":42003063308351,"sku":"13203","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/f709a875-purle-scaled.jpg?v=1793389161"},{"product_id":"pla-glow","title":"PLA Glow","description":"\u003ch2 data-start=\"101\" data-end=\"163\"\u003e\u003cstrong data-start=\"104\" data-end=\"163\"\u003ePLA Glow Filament — Glow-in-the-Dark, Easy PLA Printing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"165\" data-end=\"429\"\u003ePLA Glow is a specialty PLA filament infused with luminous powder to create glow-in-the-dark prints. After exposure to light, parts emit a visible glow in low-light conditions—perfect for signage, nameplates, decorative accents, novelty prints, and safety markers.\u003c\/p\u003e\n\u003cp data-start=\"431\" data-end=\"542\"\u003eIt prints similarly to standard PLA, but the glow additive is abrasive, so proper nozzle selection is required.\u003c\/p\u003e\n\u003ch3 data-start=\"544\" data-end=\"560\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"561\" data-end=\"726\"\u003e• Glow-in-the-dark effect in low-light environments\u003cbr data-start=\"612\" data-end=\"615\"\u003e• Decorative finish with no post-processing required\u003cbr data-start=\"667\" data-end=\"670\"\u003e• Prints like standard PLA\u003cbr data-start=\"696\" data-end=\"699\"\u003e• Reusable spool included\u003c\/p\u003e\n\u003ch3 data-start=\"728\" data-end=\"745\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"746\" data-end=\"958\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"783\" data-end=\"786\"\u003e• Nozzles: Hardened steel 0.4 mm or larger\u003cbr data-start=\"828\" data-end=\"831\"\u003e• Build plates: Cool Plate SuperTack, Smooth PEI, Textured PEI\u003cbr data-start=\"893\" data-end=\"896\"\u003e• AMS: Compatible (note: abrasive additives may increase wear)\u003c\/p\u003e\n\u003ch3 data-start=\"960\" data-end=\"978\"\u003eNot compatible\u003c\/h3\u003e\n\u003cp data-start=\"979\" data-end=\"1050\"\u003e• Stainless steel nozzles (all sizes)\u003cbr data-start=\"1016\" data-end=\"1019\"\u003e• 0.2 mm nozzles\u003cbr data-start=\"1035\" data-end=\"1038\"\u003e• AMS Lite\u003c\/p\u003e\n\u003ch3 data-start=\"1052\" data-end=\"1094\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1095\" data-end=\"1195\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"1115\" data-end=\"1118\"\u003e• Bed: 35–45 °C (with glue)\u003cbr data-start=\"1145\" data-end=\"1148\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1197\" data-end=\"1218\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1219\" data-end=\"1273\"\u003e• PLA Glow filament spool × 1\u003cbr data-start=\"1248\" data-end=\"1251\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1275\" data-end=\"1294\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1295\" data-end=\"1454\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Glow Green (15500)","offer_id":42003063603263,"sku":"15500","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Glow Pink (15200)","offer_id":42003063636031,"sku":"15200","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Glow Blue (15600)","offer_id":42003063668799,"sku":"15600","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Glow Orange (15300)","offer_id":42003063701567,"sku":"15300","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Glow Yellow (15400)","offer_id":42003063734335,"sku":"15400","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/c21e2384-4fefbcd44633bcd5e4f4663eafb78c3c_503b85f4-77b0-45f8-996b-22b829c58e4b.png?v=1793389389"},{"product_id":"pla-marble","title":"PLA Marble","description":"\u003ch2 data-start=\"124\" data-end=\"189\"\u003e\u003cstrong data-start=\"127\" data-end=\"189\"\u003ePLA Marble Filament — Stone-Like Finish, Easy PLA Printing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"191\" data-end=\"472\"\u003ePLA Marble is a decorative PLA filament that recreates the look and texture of natural stone. Subtle color variation and fine particulate content produce a realistic marble or granite-style surface, ideal for decorative prints, architectural models, sculptures, and display pieces.\u003c\/p\u003e\n\u003cp data-start=\"474\" data-end=\"574\"\u003eIt prints much like standard PLA, but proper nozzle selection is required due to the fine additives.\u003c\/p\u003e\n\u003ch3 data-start=\"576\" data-end=\"592\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"593\" data-end=\"810\"\u003e• Realistic stone-like texture and natural appearance\u003cbr data-start=\"646\" data-end=\"649\"\u003e• Subtle surface variation for authentic marble\/granite effects\u003cbr data-start=\"712\" data-end=\"715\"\u003e• Prints with standard PLA settings\u003cbr data-start=\"750\" data-end=\"753\"\u003e• Reusable spool included\u003cbr data-start=\"778\" data-end=\"781\"\u003e• AMS \u0026amp; AMS Lite compatible\u003c\/p\u003e\n\u003ch3 data-start=\"812\" data-end=\"829\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"830\" data-end=\"979\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"867\" data-end=\"870\"\u003e• Nozzles: Hardened steel 0.4 mm or larger\u003cbr data-start=\"912\" data-end=\"915\"\u003e• Build plates: Cool Plate SuperTack, Smooth PEI, Textured PEI\u003c\/p\u003e\n\u003ch3 data-start=\"981\" data-end=\"999\"\u003eNot compatible\u003c\/h3\u003e\n\u003cp data-start=\"1000\" data-end=\"1046\"\u003e• 0.2 mm nozzles\u003cbr data-start=\"1016\" data-end=\"1019\"\u003e• Stainless steel nozzles\u003c\/p\u003e\n\u003ch3 data-start=\"1048\" data-end=\"1090\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1091\" data-end=\"1191\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"1111\" data-end=\"1114\"\u003e• Bed: 35–45 °C, with \u003cstrong\u003eMagigoo\u003c\/strong\u003e if needed\u003cbr data-start=\"1141\" data-end=\"1144\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1193\" data-end=\"1214\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1215\" data-end=\"1271\"\u003e• PLA Marble filament spool × 1\u003cbr data-start=\"1246\" data-end=\"1249\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1273\" data-end=\"1292\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1293\" data-end=\"1452\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Red Granite (13201)","offer_id":42003063930943,"sku":"13201","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"White Marble (13103)","offer_id":42003063963711,"sku":"13103","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/6ef27ab9-PLA-Marble_White_600x_5e447a22-8441-4b45-b3fa-b0e860ac1b17.png?v=1793389387"},{"product_id":"pla-metal","title":"PLA Metal","description":"\u003ch2 data-start=\"110\" data-end=\"170\"\u003e\u003cstrong data-start=\"113\" data-end=\"170\"\u003ePLA Metal Filament — Metallic Look, Easy PLA Printing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"172\" data-end=\"489\"\u003ePLA Metal is a decorative PLA filament that delivers a smooth, metal-like surface finish \u003cstrong data-start=\"261\" data-end=\"272\"\u003ewithout\u003c\/strong\u003e containing metal particles. It prints just like standard PLA, making it ideal for display parts, visual prototypes, signage, and décor where a metallic appearance is desired—without abrasive wear or special hardware.\u003c\/p\u003e\n\u003ch3 data-start=\"491\" data-end=\"507\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"508\" data-end=\"678\"\u003e• Metallic surface texture and shine\u003cbr data-start=\"544\" data-end=\"547\"\u003e• Non-abrasive (no metal fillers)\u003cbr data-start=\"580\" data-end=\"583\"\u003e• Easy, standard-PLA print behavior\u003cbr data-start=\"618\" data-end=\"621\"\u003e• Reusable spool included\u003cbr data-start=\"646\" data-end=\"649\"\u003e• AMS \u0026amp; AMS Lite compatible\u003c\/p\u003e\n\u003ch3 data-start=\"680\" data-end=\"697\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"698\" data-end=\"802\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"735\" data-end=\"738\"\u003e• Build plates: Cool Plate SuperTack, Smooth PEI, Textured PEI\u003c\/p\u003e\n\u003ch3 data-start=\"804\" data-end=\"846\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"847\" data-end=\"947\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"867\" data-end=\"870\"\u003e• Bed: 35–45 °C (with glue)\u003cbr data-start=\"897\" data-end=\"900\"\u003e• Storage: Keep sealed and dry with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"949\" data-end=\"970\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"971\" data-end=\"1026\"\u003e• PLA Metal filament spool × 1\u003cbr data-start=\"1001\" data-end=\"1004\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1028\" data-end=\"1047\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1048\" data-end=\"1207\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Oxide Green Metallic (13500)","offer_id":42003063767103,"sku":"13500","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Cobalt Blue Metallic (13600)","offer_id":42003063799871,"sku":"13600","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Iridium Gold Metallic (13400)","offer_id":42003063832639,"sku":"13400","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Copper Brown Metallic (13800)","offer_id":42003063865407,"sku":"13800","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Iron Gray Metallic (13100)","offer_id":42003063898175,"sku":"13100","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/bfaa7ebc-PLA-Metal_Oxide-Green-Metallic_600x_efe39f08-b027-4d53-ad0e-9cf702180392.png?v=1793389161"},{"product_id":"pla-sparkle","title":"PLA Sparkle","description":"\u003ch2 data-start=\"123\" data-end=\"176\"\u003e\u003cstrong data-start=\"126\" data-end=\"176\"\u003ePLA Sparkle Filament — Subtle Metallic Shimmer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"178\" data-end=\"446\"\u003ePLA Sparkle is a decorative PLA filament infused with fine sparkle additives that create a subtle metallic shimmer in finished prints. It’s ideal for display pieces, décor, cosplay parts, and models where visual impact matters—without needing paint or post-processing.\u003c\/p\u003e\n\u003cp data-start=\"448\" data-end=\"570\"\u003eIt prints much like standard PLA, with the main consideration being proper nozzle selection due to the embedded particles.\u003c\/p\u003e\n\u003ch3 data-start=\"572\" data-end=\"588\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"589\" data-end=\"776\"\u003e• Sparkling surface finish with metallic shimmer\u003cbr data-start=\"637\" data-end=\"640\"\u003e• Decorative look straight off the printer\u003cbr data-start=\"682\" data-end=\"685\"\u003e• Easy-printing PLA formulation\u003cbr data-start=\"716\" data-end=\"719\"\u003e• Reusable spool included\u003cbr data-start=\"744\" data-end=\"747\"\u003e• AMS \u0026amp; AMS Lite compatible\u003c\/p\u003e\n\u003ch3 data-start=\"778\" data-end=\"795\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"796\" data-end=\"949\"\u003e• Printers: Most 1.75 mm FDM printers\u003cbr data-start=\"833\" data-end=\"836\"\u003e• Nozzles: Hardened steel \u003cstrong data-start=\"862\" data-end=\"882\"\u003e0.4 mm or larger\u003c\/strong\u003e\u003cbr data-start=\"882\" data-end=\"885\"\u003e• Build plates: Cool Plate SuperTack, Smooth PEI, Textured PEI\u003c\/p\u003e\n\u003ch3 data-start=\"951\" data-end=\"969\"\u003eNot compatible\u003c\/h3\u003e\n\u003cp data-start=\"970\" data-end=\"1016\"\u003e• 0.2 mm nozzles\u003cbr data-start=\"986\" data-end=\"989\"\u003e• Stainless steel nozzles\u003c\/p\u003e\n\u003ch3 data-start=\"1018\" data-end=\"1060\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1061\" data-end=\"1187\"\u003e• Nozzle: 190–230 °C\u003cbr data-start=\"1081\" data-end=\"1084\"\u003e• Bed: 35–45 °C (with glue)\u003cbr data-start=\"1111\" data-end=\"1114\"\u003e• Dry before use if moisture is present\u003cbr data-start=\"1153\" data-end=\"1156\"\u003e• Store sealed with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1189\" data-end=\"1210\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1211\" data-end=\"1268\"\u003e• PLA Sparkle filament spool × 1\u003cbr data-start=\"1243\" data-end=\"1246\"\u003e• Desiccant pack × 1\u003c\/p\u003e\n\u003ch3 data-start=\"1270\" data-end=\"1289\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1290\" data-end=\"1449\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Alpine Green Sparkle (13501)","offer_id":42003064062015,"sku":"13501","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Royal Purple Sparkle (13700)","offer_id":42003064094783,"sku":"13700","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Slate Gray Sparkle (13102)","offer_id":42003064127551,"sku":"13102","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Crimson Red Sparkle (13200)","offer_id":42003064160319,"sku":"13200","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Onyx Black Sparkle (13101)","offer_id":42003064193087,"sku":"13101","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Classic Gold Sparkle (13402)","offer_id":42003064225855,"sku":"13402","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/915afc7b-PLA-Sparkle_Alpine-Green-Sparkle_600x_b9c4f9b1-0831-4e5a-92ca-0d3d27f14038.png?v=1793387994"},{"product_id":"tpu-95a-hf","title":"TPU 95A HF","description":"\u003ch2 data-start=\"120\" data-end=\"172\"\u003e\u003cstrong data-start=\"123\" data-end=\"172\"\u003eBambu TPU 95A HF — Flexible, Tough, High-Flow\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"174\" data-end=\"441\"\u003eBambu TPU 95A HF is a high-flow flexible filament built for fast, reliable printing with reduced stringing. It combines flexibility and durability, making it ideal for functional parts that need to bend, absorb impact, and return to shape without tearing or cracking.\u003c\/p\u003e\n\u003ch3 data-start=\"443\" data-end=\"468\"\u003eWhy choose TPU 95A HF\u003c\/h3\u003e\n\u003cp data-start=\"469\" data-end=\"713\"\u003e• Shore 95A flexibility — tough but still elastic\u003cbr data-start=\"518\" data-end=\"521\"\u003e• High-flow formulation for smoother, faster extrusion\u003cbr data-start=\"575\" data-end=\"578\"\u003e• Reduced stringing versus standard TPU\u003cbr data-start=\"617\" data-end=\"620\"\u003e• Strong layer adhesion and impact resistance\u003cbr data-start=\"665\" data-end=\"668\"\u003e• Ideal for functional, flexible components\u003c\/p\u003e\n\u003ch3 data-start=\"715\" data-end=\"730\"\u003eCommon uses\u003c\/h3\u003e\n\u003cp data-start=\"731\" data-end=\"889\"\u003e• Protective cases and bumpers\u003cbr data-start=\"761\" data-end=\"764\"\u003e• Gaskets, seals, and flexible brackets\u003cbr data-start=\"803\" data-end=\"806\"\u003e• Vibration dampers and shock absorbers\u003cbr data-start=\"845\" data-end=\"848\"\u003e• Wearables, grips, and ergonomic parts\u003c\/p\u003e\n\u003ch3 data-start=\"891\" data-end=\"908\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"909\" data-end=\"1089\"\u003e• Works on enclosed or open-frame printers\u003cbr data-start=\"951\" data-end=\"954\"\u003e• ❌ Not compatible with AMS or AMS Lite\u003cbr data-start=\"993\" data-end=\"996\"\u003e• ❌ 0.2 mm nozzle not supported\u003cbr data-start=\"1027\" data-end=\"1030\"\u003e• Hardened steel nozzles recommended (0.4 \/ 0.6 \/ 0.8 mm)\u003c\/p\u003e\n\u003ch3 data-start=\"1091\" data-end=\"1132\"\u003eRecommended settings (starting point)\u003c\/h3\u003e\n\u003cp data-start=\"1133\" data-end=\"1261\"\u003e• Nozzle: 220–250 °C\u003cbr data-start=\"1153\" data-end=\"1156\"\u003e• Bed: 30–35 °C (use glue if needed)\u003cbr data-start=\"1192\" data-end=\"1195\"\u003e• Speed: up to 200 mm\/s\u003cbr data-start=\"1218\" data-end=\"1221\"\u003e• Dry before printing for best results\u003c\/p\u003e\n\u003ch3 data-start=\"1263\" data-end=\"1272\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"1273\" data-end=\"1391\"\u003eTPU absorbs moisture quickly. Store sealed with desiccant and dry before use to prevent stringing and surface defects.\u003c\/p\u003e\n\u003ch3 data-start=\"1393\" data-end=\"1412\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1413\" data-end=\"1572\"\u003eFilament and consumables are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Black (51100)","offer_id":42003064684607,"sku":"51100","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"White (51102)","offer_id":42003064717375,"sku":"51102","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"Gray (51101)","offer_id":42003064750143,"sku":"51101","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"Yellow (51400)","offer_id":42003064782911,"sku":"51400","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"Blue (51600)","offer_id":42003064815679,"sku":"51600","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"Red (51200)","offer_id":42003064848447,"sku":"51200","price":48.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/2db7b8a0-TPUHF_2.png?v=1757004402"},{"product_id":"bambu-lab-ams-automatic-material-system","title":"Bambu Lab AMS - Automatic Material System","description":"\u003ch2 data-start=\"301\" data-end=\"365\"\u003eBambu Lab AMS — Automatic Multi-Color \u0026amp; Multi-Material System\u003c\/h2\u003e\n\u003cp data-start=\"367\" data-end=\"666\"\u003eThe Bambu Lab AMS (Automatic Material System) enables automated multi-color and multi-material printing by managing up to four filament spools per unit. It handles filament switching, buffering, and monitoring automatically, allowing cleaner color transitions and more reliable long-duration prints.\u003c\/p\u003e\n\u003cp data-start=\"668\" data-end=\"927\"\u003eA sealed filament path, buffered feeding system, and built-in sensors help reduce tangles, manage humidity, and protect prints during material changes. The AMS is designed to integrate tightly with the Bambu Lab ecosystem for consistent, low-hassle operation.\u003c\/p\u003e\n\u003ch3 data-start=\"929\" data-end=\"945\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"947\" data-end=\"1355\"\u003e• Supports up to 4 filament spools per AMS unit\u003cbr data-start=\"994\" data-end=\"997\"\u003e• Automatic filament switching during prints\u003cbr data-start=\"1041\" data-end=\"1044\"\u003e• Buffered feeding system for smooth, low-drag filament movement\u003cbr data-start=\"1108\" data-end=\"1111\"\u003e• Sealed filament path with desiccant storage to help manage moisture\u003cbr data-start=\"1180\" data-end=\"1183\"\u003e• Filament runout and tangle detection\u003cbr data-start=\"1221\" data-end=\"1224\"\u003e• RFID filament recognition on compatible spools\u003cbr data-start=\"1272\" data-end=\"1275\"\u003e• Expandable to support up to 16 materials or colors with additional AMS units\u003c\/p\u003e\n\u003ch3 data-start=\"1357\" data-end=\"1382\"\u003ePrinter compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1384\" data-end=\"1512\"\u003e• \u003cstrong data-start=\"1386\" data-end=\"1409\"\u003eP1 \/ P2 \/ X1 Series\u003c\/strong\u003e\u003cbr data-start=\"1409\" data-end=\"1412\"\u003e– Single AMS: requires a filament buffer\u003cbr data-start=\"1454\" data-end=\"1457\"\u003e– Multiple AMS units: requires a multi-port AMS hub\u003c\/p\u003e\n\u003cp data-start=\"1514\" data-end=\"1654\"\u003e• \u003cstrong data-start=\"1516\" data-end=\"1539\"\u003eA1 \/ A1 Mini Series\u003c\/strong\u003e\u003cbr data-start=\"1539\" data-end=\"1542\"\u003e– Requires the A1 Series filament hub\u003cbr data-start=\"1581\" data-end=\"1584\"\u003e– AMS Lite cannot be mixed with standard AMS units on the same hub\u003c\/p\u003e\n\u003cp data-start=\"1656\" data-end=\"1765\"\u003e• Uses standard 1.75 mm filament\u003cbr data-start=\"1688\" data-end=\"1691\"\u003e• Moisture-sensitive filaments should be dried separately before loading\u003c\/p\u003e\n\u003ch3 data-start=\"1767\" data-end=\"1790\"\u003eSupported use cases\u003c\/h3\u003e\n\u003cp data-start=\"1792\" data-end=\"1974\"\u003e• Multi-color aesthetic prints\u003cbr data-start=\"1822\" data-end=\"1825\"\u003e• Multi-material functional parts\u003cbr data-start=\"1858\" data-end=\"1861\"\u003e• Support material printing\u003cbr data-start=\"1888\" data-end=\"1891\"\u003e• Long-duration and unattended prints\u003cbr data-start=\"1928\" data-end=\"1931\"\u003e• Print farms and production environments\u003c\/p\u003e\n\u003ch3 data-start=\"1976\" data-end=\"1997\"\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cp data-start=\"1999\" data-end=\"2280\"\u003e• Bambu Lab AMS unit (4-slot)\u003cbr data-start=\"2028\" data-end=\"2031\"\u003e• PTFE tubes (multiple lengths)\u003cbr data-start=\"2062\" data-end=\"2065\"\u003e• PTFE tube connectors\u003cbr data-start=\"2087\" data-end=\"2090\"\u003e• Bus cable – 6-pin\u003cbr data-start=\"2109\" data-end=\"2112\"\u003e• Bus cable – 4-pin\u003cbr data-start=\"2131\" data-end=\"2134\"\u003e• Filament buffer\u003cbr data-start=\"2151\" data-end=\"2154\"\u003e• Spare filament cutters ×2\u003cbr data-start=\"2181\" data-end=\"2184\"\u003e• Reusable filament spools ×3\u003cbr data-start=\"2213\" data-end=\"2216\"\u003e• High-temperature reusable filament spool\u003cbr data-start=\"2258\" data-end=\"2261\"\u003e• Desiccant packs\u003c\/p\u003e\n\u003cp data-start=\"2282\" data-end=\"2381\"\u003e\u003cem data-start=\"2282\" data-end=\"2381\"\u003e(Additional hubs or adapters may be required depending on printer model and number of AMS units.)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"2383\" data-end=\"2402\"\u003eImportant notes\u003c\/h3\u003e\n\u003cp data-start=\"2404\" data-end=\"2620\"\u003e• AMS Lite is a separate system and is not interchangeable with standard AMS\u003cbr data-start=\"2480\" data-end=\"2483\"\u003e• Sealed design helps manage humidity but does not replace filament drying\u003cbr data-start=\"2557\" data-end=\"2560\"\u003e• Compatibility depends on printer model and configuration\u003c\/p\u003e\n\u003ch3 data-start=\"2622\" data-end=\"2641\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2643\" data-end=\"2814\"\u003eAMS units, 3D printers, and filament are final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003064979519,"sku":"SA001","price":289.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/8b92f9c9-ams-1_700x_18e6ff79-2460-4222-ae6c-4a87b1dd261d.webp?v=1767373394"},{"product_id":"abs","title":"ABS","description":"\u003ch2 data-start=\"116\" data-end=\"178\"\u003eBambu Lab ABS Filament — Strong, Heat-Resistant, Functional\u003c\/h2\u003e\n\u003cp data-start=\"180\" data-end=\"479\"\u003eBambu Lab ABS is a tough, impact-resistant filament designed for functional parts that need strength, durability, and better heat resistance than PLA. With reliable diameter control and strong layer bonding, it’s well suited for enclosed printers and heated beds where dimensional stability matters.\u003c\/p\u003e\n\u003ch3 data-start=\"481\" data-end=\"499\"\u003eWhy choose ABS\u003c\/h3\u003e\n\u003cp data-start=\"500\" data-end=\"747\"\u003e• \u003cstrong data-start=\"502\" data-end=\"531\"\u003eStrong \u0026amp; impact-resistant\u003c\/strong\u003e for real-world functional parts\u003cbr data-start=\"563\" data-end=\"566\"\u003e• \u003cstrong data-start=\"568\" data-end=\"603\"\u003eBetter heat resistance than PLA\u003c\/strong\u003e for warm environments\u003cbr data-start=\"625\" data-end=\"628\"\u003e• \u003cstrong data-start=\"630\" data-end=\"653\"\u003eGood layer adhesion\u003c\/strong\u003e for durable, load-bearing prints\u003cbr data-start=\"686\" data-end=\"689\"\u003e• \u003cstrong data-start=\"691\" data-end=\"715\"\u003eConsistent extrusion\u003c\/strong\u003e with tight diameter tolerance\u003c\/p\u003e\n\u003ch3 data-start=\"749\" data-end=\"771\"\u003eIdeal applications\u003c\/h3\u003e\n\u003cp data-start=\"772\" data-end=\"904\"\u003e• Mechanical parts and brackets\u003cbr data-start=\"803\" data-end=\"806\"\u003e• Jigs, fixtures, and tooling\u003cbr data-start=\"835\" data-end=\"838\"\u003e• Enclosures and housings\u003cbr data-start=\"863\" data-end=\"866\"\u003e• Automotive and shop-use components\u003c\/p\u003e\n\u003ch3 data-start=\"906\" data-end=\"954\"\u003eRecommended print settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"955\" data-end=\"1126\"\u003e• Nozzle: \u003cstrong data-start=\"965\" data-end=\"979\"\u003e230–260 °C\u003c\/strong\u003e\u003cbr data-start=\"979\" data-end=\"982\"\u003e• Bed: \u003cstrong data-start=\"989\" data-end=\"1002\"\u003e90–110 °C\u003c\/strong\u003e\u003cbr data-start=\"1002\" data-end=\"1005\"\u003e• Enclosure: \u003cstrong data-start=\"1018\" data-end=\"1042\"\u003eStrongly recommended\u003c\/strong\u003e to reduce warping\u003cbr data-start=\"1060\" data-end=\"1063\"\u003e• Build surface: PEI or engineering plate with Magigoo glue as needed\u003c\/p\u003e\n\u003ch3 data-start=\"1128\" data-end=\"1151\"\u003eCompatibility notes\u003c\/h3\u003e\n\u003cp data-start=\"1152\" data-end=\"1313\"\u003e• Best on enclosed printers (P1S, X1, X1E, H2 Series)\u003cbr data-start=\"1205\" data-end=\"1208\"\u003e• \u003cstrong data-start=\"1210\" data-end=\"1246\"\u003eNot recommended for A1 \/ A1 Mini\u003c\/strong\u003e due to open-frame design\u003cbr data-start=\"1271\" data-end=\"1274\"\u003e• AMS compatible when filament is dry\u003c\/p\u003e\n\u003ch3 data-start=\"1315\" data-end=\"1334\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1335\" data-end=\"1524\"\u003eFilament is final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"ABS Bambu Green (40500) \/ Refill","offer_id":42003065307199,"sku":"40500 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Red (40200) \/ Refill","offer_id":42003065339967,"sku":"40200 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Olive (40502) \/ Refill","offer_id":42003065372735,"sku":"40502 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Black (40101) \/ Filament with spool","offer_id":42003065405503,"sku":"40101","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Black (40101) \/ Refill","offer_id":42003065438271,"sku":"40101 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"ABS Beige (40401) \/ Filament with spool","offer_id":42003065471039,"sku":"40401","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Silver (40102) \/ Filament with spool","offer_id":42003065503807,"sku":"40102","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"ABS White (40100) \/ Filament with spool","offer_id":42003065536575,"sku":"40100","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"ABS White (40100) \/ Refill","offer_id":42003065569343,"sku":"40100 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Blue (40600) \/ Refill","offer_id":42003065634879,"sku":"40600 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Orange (40300) \/ Refill","offer_id":42003065667647,"sku":"40300 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Tangerine Yellow (40402) \/ Refill","offer_id":42003065700415,"sku":"40402 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Azure (40601) \/ Refill","offer_id":42442970431551,"sku":"40601 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"ABS Navy Blue (40602) \/ Refill","offer_id":42442972692543,"sku":"40602 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3174b73e-ABSmint_1400x_39295e4e-368e-41dc-bc33-682eb49f5ded.webp?v=1793389387"},{"product_id":"paht-cf","title":"PAHT-CF","description":"\u003ch2\u003eBambu PAHT-CF — Low-Moisture, High-Strength Nylon-CF\u003c\/h2\u003e\n\u003cp\u003eCarbon-fiber reinforced • Stable in humidity • Industrial strength\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eBambu PAHT-CF is a carbon-fiber reinforced PA12 engineered for strong, dimensionally stable parts—even in humid environments. Compared to standard PA-CF, it absorbs less moisture, maintains stiffness when wet, and delivers noticeably stronger Z-layer bonding. Ideal for fixtures, jigs, brackets, molds, and end-use functional parts.\u003c\/p\u003e\n\u003ch3\u003eWhy choose PAHT-CF\u003c\/h3\u003e\n\u003cp\u003e• Low moisture absorption for stable dimensions\u003cbr\u003e• Strong Z-layer adhesion to resist delamination\u003cbr\u003e• High tensile strength and stiffness for load-bearing parts\u003cbr\u003e• Performs well at elevated temperatures\u003cbr\u003e• AMS compatible\u003c\/p\u003e\n\u003ch3\u003eRecommended print settings (starting points)\u003c\/h3\u003e\n\u003cp\u003e• Drying: 80 °C × 8–12 h (keep \u0026lt; 20 % RH while printing)\u003cbr\u003e• Nozzle: 260–290 °C\u003cbr\u003e• Bed: 80–100 °C (use Magigoo PA)\u003cbr\u003e• Speed: \u0026lt; 100 mm\/s\u003cbr\u003e• Printer: Enclosed required\u003c\/p\u003e\n\u003ch3\u003eHardware \u0026amp; build surfaces\u003c\/h3\u003e\n\u003cp\u003e• Nozzle: Hardened steel 0.6 mm recommended (0.4 \/ 0.8 mm OK)\u003cbr\u003e• Plates: High-Temp Plate or Engineering Plate\u003cbr\u003e• Not recommended: Cool Plate, stainless nozzles, 0.2 mm nozzles\u003c\/p\u003e\n\u003ch3\u003eNotes \u0026amp; tips\u003c\/h3\u003e\n\u003cp\u003e• Always dry thoroughly before printing and after storage\u003cbr\u003e• Use \u003cstrong\u003eMagigoo \u003cem\u003ePA\u003c\/em\u003e\u003c\/strong\u003e to improve adhesion and protect the plate\u003cbr\u003e• Remove supports shortly after printing to avoid moisture-related sticking\u003cbr\u003e• Store sealed with desiccant between prints\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• Bambu PAHT-CF filament spool (1.75 mm ± 0.03 mm)\u003cbr\u003e• Desiccant\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan • Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eFilament is final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.5 kg","offer_id":42003066224703,"sku":"70100 - 0.5KG","price":57.59,"currency_code":"CAD","in_stock":true},{"title":"1 kg","offer_id":42003066257471,"sku":"70100 - 1KG","price":108.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/f27aa949-PAHTCFORIGINAL_1400x_5fe7b5ef-d830-43cf-bbe4-07ed67cbc256.webp?v=1793389461"},{"product_id":"pla-matte","title":"PLA Matte","description":"\u003ch2\u003eBambu PLA Matte — Low-Sheen Finish, Clean Detail, Easy Printing\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSoft Matte • Hides Layer Lines • AMS Compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003ePLA Matte delivers a smooth, low-gloss finish straight off the build plate. Its muted surface hides layer lines and fingerprints, giving prints a premium, professional look without sanding or painting—while printing just as easily as standard PLA.\u003c\/p\u003e\n\u003ch3\u003eWhy choose PLA Matte\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eSoft matte finish:\u003c\/strong\u003e Reduces shine, hides layer lines and fingerprints\u003cbr\u003e• \u003cstrong\u003eEasy printing:\u003c\/strong\u003e Same settings and reliability as PLA Basic\u003cbr\u003e• \u003cstrong\u003eCrisp detail:\u003c\/strong\u003e Sharp text, logos, and edges\u003cbr\u003e• \u003cstrong\u003eScuff-resistant surface:\u003c\/strong\u003e Ideal for visual and display parts\u003cbr\u003e• \u003cstrong\u003eAMS ready:\u003c\/strong\u003e Compatible with AMS \/ AMS 2 Pro \/ AMS HT\u003c\/p\u003e\n\u003ch3\u003eIdeal for\u003c\/h3\u003e\n\u003cp\u003eProduct mockups • Cosplay armor • Signage • Props • Décor \u0026amp; gift items\u003c\/p\u003e\n\u003ch3\u003eRecommended settings (starting point)\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eNozzle:\u003c\/strong\u003e 200–220 °C\u003cbr\u003e• \u003cstrong\u003eBed:\u003c\/strong\u003e 40–60 °C (or unheated on high-adhesion plates)\u003cbr\u003e• \u003cstrong\u003eFan:\u003c\/strong\u003e 80–100% after first layers\u003cbr\u003e• \u003cstrong\u003eSpeed:\u003c\/strong\u003e 50–200 mm\/s\u003cbr\u003e• \u003cstrong\u003eBuild plates:\u003c\/strong\u003e Smooth or Textured PEI\u003cbr\u003e• \u003cstrong\u003eCleaning:\u003c\/strong\u003e Blue Dawn dish soap + hot water, towel dry\u003c\/p\u003e\n\u003ch3\u003ePro tips for best matte finish\u003c\/h3\u003e\n\u003cp\u003e• Run slightly cooler temps for deeper matte texture\u003cbr\u003e• Avoid over-extrusion—extra flow increases shine\u003cbr\u003e• Keep seam placement consistent\u003cbr\u003e• Skip or reduce ironing to preserve the matte look\u003c\/p\u003e\n\u003ch3\u003eTechnical specs\u003c\/h3\u003e\n\u003cp\u003e• Material: PLA (matte modified)\u003cbr\u003e• Diameter: 1.75 mm\u003cbr\u003e• Typical spool: 1 kg\u003cbr\u003e• Density: ~1.25 g\/cm³\u003cbr\u003e• Vicat softening: ~64 °C\u003cbr\u003e• Storage: Cool, dry, resealed with desiccant\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eWorks on Bambu A1 \/ A1 Mini \/ P1S \/ P2S \/ X1 \/ H2 Series and most 1.75 mm FDM printers.\u003cbr\u003eAMS compatible; drying usually not required.\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan • Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over $60\u003cbr\u003e• In-store pickup with real-world support\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eFilament is final sale. Approved returns on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Matte Ivory White (11100) \/ Filament with spool","offer_id":42003066912831,"sku":"11100","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Ivory White (11100) \/ Refill","offer_id":42003066945599,"sku":"11100 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Latte Brown (11800) \/ Refill","offer_id":42003066978367,"sku":"11800 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Lilac Purple (11700) \/ Refill","offer_id":42003067011135,"sku":"11700 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Ash Grey (11102) \/ Filament with spool","offer_id":42003067043903,"sku":"11102","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Ash Grey (11102) \/ Refill","offer_id":42003067076671,"sku":"11102 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Mandarin Orange (11300) \/ Refill","offer_id":42003067109439,"sku":"11300 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Sakura Pink (11201) \/ Refill","offer_id":42003067142207,"sku":"11201 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Ice Blue (11601) \/ Refill","offer_id":42003067174975,"sku":"11601 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Marine Blue (11600) \/ Filament with spool","offer_id":42003067207743,"sku":"11600","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Marine Blue (11600) \/ Refill","offer_id":42003067240511,"sku":"11600 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Lemon Yellow (11400) \/ Refill","offer_id":42003067273279,"sku":"11400 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Scarlet Red (11200) \/ Filament with spool","offer_id":42003067306047,"sku":"11200","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Scarlet Red (11200) \/ Refill","offer_id":42003067338815,"sku":"11200 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Dark Red (11202) \/ Refill","offer_id":42003067371583,"sku":"11202 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Dark Brown (11801) \/ Refill","offer_id":42003067404351,"sku":"11801 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Dark Green (11501) \/ Refill","offer_id":42003067437119,"sku":"11501 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Matte Grass Green (11500) \/ Refill","offer_id":42003067469887,"sku":"11500 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Dark Blue (11602) \/ Refill","offer_id":42003067502655,"sku":"11602 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Charcoal (11101) \/ Filament with spool","offer_id":42003067535423,"sku":"11101","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Charcoal (11101) \/ Refill","offer_id":42003067568191,"sku":"11101 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Desert Tan (11401) \/ Refill","offer_id":42003067600959,"sku":"11401 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Matte Bone White (11103) \/ Refill","offer_id":42003067633727,"sku":"11103 - BONE WHITE","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Plum (11204) \/ Refill","offer_id":42003067666495,"sku":"11204 - PLUM","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Sky Blue (11603) \/ Refill","offer_id":42003067699263,"sku":"11603 - SKY BLUE","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Apple Green (11502) \/ Refill","offer_id":42003067732031,"sku":"11502 - APPLE GREEN","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Dark Chocolate (11802) \/ Refill","offer_id":42003067764799,"sku":"11802 - DARK CHOCOLATE","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Caramel (11803) \/ Refill","offer_id":42003067797567,"sku":"11803 - CARAMEL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Terracotta (11203) \/ Refill","offer_id":42003067830335,"sku":"11203 - TERRACOTTA","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Nardo Gray (11104) \/ Refill","offer_id":42003067863103,"sku":"11104 - NARDO GRAY","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Mandarin Orange (11300) \/ Filament with spool","offer_id":42003067895871,"sku":"11300","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Matte Desert Tan (11401) \/ Filament with spool","offer_id":42790104956991,"sku":"11401","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/378a976c-PLA-Matte_Ash-Gray_1400x_378531d1-5a12-4fef-8ea0-ea40747b88c3.webp?v=1793389461"},{"product_id":"pla-basic","title":"PLA Basic","description":"\u003cp\u003eSold by Convoy-Westcan, authorized Bambu Lab dealer in Winnipeg. Pick up at 1692 Dublin Avenue or ship anywhere in Canada; free Winnipeg courier delivery on orders over $60.\u003c\/p\u003e\n\u003ch2 data-start=\"153\" data-end=\"209\"\u003eBambu PLA Basic — Easy, Reliable, Everyday Printing\u003c\/h2\u003e\n\u003cp data-start=\"210\" data-end=\"254\"\u003e\u003cstrong data-start=\"210\" data-end=\"254\"\u003eLow Warp • Clean Finish • AMS Compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"256\" data-end=\"270\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"271\" data-end=\"530\"\u003eBambu PLA Basic is a dependable, no-fuss filament designed for consistent results on nearly any 1.75 mm FDM printer. It prints cleanly with minimal warping, strong layer bonding, and smooth surface finish—making it ideal for beginners and professionals alike.\u003c\/p\u003e\n\u003ch3 data-start=\"532\" data-end=\"558\"\u003eWhy choose PLA Basic\u003c\/h3\u003e\n\u003cp data-start=\"559\" data-end=\"866\"\u003e• \u003cstrong data-start=\"561\" data-end=\"579\"\u003eEasy to print:\u003c\/strong\u003e Wide temperature window and predictable flow\u003cbr data-start=\"624\" data-end=\"627\"\u003e• \u003cstrong data-start=\"629\" data-end=\"653\"\u003eLow warp \u0026amp; low odor:\u003c\/strong\u003e Great for open or enclosed printers\u003cbr data-start=\"689\" data-end=\"692\"\u003e• \u003cstrong data-start=\"694\" data-end=\"711\"\u003eCrisp detail:\u003c\/strong\u003e Sharp edges and solid color coverage\u003cbr data-start=\"748\" data-end=\"751\"\u003e• \u003cstrong data-start=\"753\" data-end=\"767\"\u003eAMS ready:\u003c\/strong\u003e Compatible with AMS \/ AMS 2 Pro \/ AMS HT\u003cbr data-start=\"808\" data-end=\"811\"\u003e• \u003cstrong data-start=\"813\" data-end=\"836\"\u003eNo drying required:\u003c\/strong\u003e Ready to print out of the box\u003c\/p\u003e\n\u003ch3 data-start=\"868\" data-end=\"883\"\u003eIdeal for\u003c\/h3\u003e\n\u003cp data-start=\"884\" data-end=\"976\"\u003ePrototypes • Models • Miniatures • Signage • Fixtures • Classroom projects • Cosplay \u0026amp; décor\u003c\/p\u003e\n\u003ch3 data-start=\"978\" data-end=\"1022\"\u003eRecommended settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1023\" data-end=\"1264\"\u003e• \u003cstrong data-start=\"1025\" data-end=\"1036\"\u003eNozzle:\u003c\/strong\u003e 200–220 °C\u003cbr data-start=\"1047\" data-end=\"1050\"\u003e• \u003cstrong data-start=\"1052\" data-end=\"1060\"\u003eBed:\u003c\/strong\u003e 40–60 °C (or unheated on high-adhesion plates)\u003cbr data-start=\"1107\" data-end=\"1110\"\u003e• \u003cstrong data-start=\"1112\" data-end=\"1124\"\u003eCooling:\u003c\/strong\u003e 80–100% after first layers\u003cbr data-start=\"1151\" data-end=\"1154\"\u003e• \u003cstrong data-start=\"1156\" data-end=\"1166\"\u003eSpeed:\u003c\/strong\u003e 50–200 mm\/s (slower outer walls = smoother finish)\u003cbr data-start=\"1217\" data-end=\"1220\"\u003e• \u003cstrong data-start=\"1222\" data-end=\"1239\"\u003eBuild plates:\u003c\/strong\u003e Smooth or Textured PEI\u003c\/p\u003e\n\u003ch3 data-start=\"1266\" data-end=\"1285\"\u003ePrinting tips\u003c\/h3\u003e\n\u003cp data-start=\"1286\" data-end=\"1543\"\u003e• Store sealed with desiccant when not in use\u003cbr data-start=\"1331\" data-end=\"1334\"\u003e• Add a brim for tall or thin parts\u003cbr data-start=\"1369\" data-end=\"1372\"\u003e• If adhesion is too strong, clean plate with \u003cstrong data-start=\"1418\" data-end=\"1453\"\u003eblue Dawn dish soap + hot water\u003c\/strong\u003e, then towel dry\u003cbr data-start=\"1469\" data-end=\"1472\"\u003e• AMS users: confirm correct profile\/tag for smooth feeding and purging\u003c\/p\u003e\n\u003ch3 data-start=\"1545\" data-end=\"1556\"\u003eSpecs\u003c\/h3\u003e\n\u003cp data-start=\"1557\" data-end=\"1668\"\u003e• Material: PLA\u003cbr data-start=\"1572\" data-end=\"1575\"\u003e• Diameter: 1.75 mm\u003cbr data-start=\"1594\" data-end=\"1597\"\u003e• Spool size: typically 1 kg\u003cbr data-start=\"1625\" data-end=\"1628\"\u003e• Storage: Cool, dry, resealed after use\u003c\/p\u003e\n\u003ch3 data-start=\"1670\" data-end=\"1689\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"1690\" data-end=\"1828\"\u003e• \u003cstrong data-start=\"1692\" data-end=\"1705\"\u003ePrinters:\u003c\/strong\u003e A1 \/ A1 Mini \/ P1S \/ P2S \/ X1 \/ H2 Series and most 1.75 mm FDM printers\u003cbr data-start=\"1777\" data-end=\"1780\"\u003e• \u003cstrong data-start=\"1782\" data-end=\"1803\"\u003eMaterial systems:\u003c\/strong\u003e AMS \/ AMS 2 Pro \/ AMS HT\u003c\/p\u003e\n\u003ch3 data-start=\"1830\" data-end=\"1851\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1852\" data-end=\"1997\"\u003eFilament is final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Jade White (10100) \/ Filament with spool","offer_id":42003069141055,"sku":"10100","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Jade White (10100) \/ Refill","offer_id":42003069173823,"sku":"10100 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Black (10101) \/ Filament with spool","offer_id":42003069206591,"sku":"10101","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Black (10101) \/ Refill","offer_id":42003069239359,"sku":"10101 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Brown (10800) \/ Refill","offer_id":42003069272127,"sku":"10800 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Gray (10103) \/ Filament with spool","offer_id":42003069304895,"sku":"10103","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Gray (10103) \/ Refill","offer_id":42003069337663,"sku":"10103 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Red (10200) \/ Filament with spool","offer_id":42003069370431,"sku":"10200","price":22.99,"currency_code":"CAD","in_stock":false},{"title":"Pink (10203) \/ Filament with spool","offer_id":43147193516095,"sku":"10203","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Red (10200) \/ Refill","offer_id":42003069403199,"sku":"10200 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Pink (10203) \/ Refill","offer_id":42003069435967,"sku":"10203 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Orange (10300) \/ Refill","offer_id":42003069468735,"sku":"10300 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (10601) \/ Filament with spool","offer_id":42003069501503,"sku":"10601","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (10601) \/ Refill","offer_id":42003069534271,"sku":"10601 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Yellow (10400) \/ Refill","offer_id":42003069567039,"sku":"10400 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Blue Grey (10602) \/ Refill","offer_id":42003069599807,"sku":"10602 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Magenta (10202) \/ Refill","offer_id":42003069632575,"sku":"10202 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Bambu Green (10501) \/ Filament with spool","offer_id":42003069665343,"sku":"10501","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Bambu Green (10501) \/ Refill","offer_id":42003069698111,"sku":"10501 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Mistletoe Green (10502) \/ Refill","offer_id":42003069730879,"sku":"10502 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Cyan (10603) \/ Refill","offer_id":42003069763647,"sku":"10603 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Purple (10700) \/ Refill","offer_id":42003069796415,"sku":"10700 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Beige (10201) \/ Refill","offer_id":42003069829183,"sku":"10201 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Silver (10102) \/ Refill","offer_id":42003069861951,"sku":"10102 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Gold (10401) \/ Refill","offer_id":42003069894719,"sku":"10401 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Bronze (10801) \/ Refill","offer_id":42003069927487,"sku":"10801 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Light Gray (10104) \/ Refill","offer_id":42003069960255,"sku":"10104 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Dark Gray (10105) \/ Refill","offer_id":42003069993023,"sku":"10105 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Cocoa Brown (10802) \/ Refill","offer_id":42003070025791,"sku":"10802 - REFILL","price":18.99,"currency_code":"CAD","in_stock":false},{"title":"Cobalt Blue (10604) \/ Refill","offer_id":42003070058559,"sku":"10604 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Turquoise (10605) \/ Refill","offer_id":42003070091327,"sku":"10605 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Indigo Purple (10701) \/ Refill","offer_id":42003070124095,"sku":"10701 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Maroon Red (10205) \/ Refill","offer_id":42003070156863,"sku":"10205 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Hot Pink (10204) \/ Refill","offer_id":42003070189631,"sku":"10204 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Bright Green (10503) \/ Refill","offer_id":42003070222399,"sku":"10503 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Pumpkin Orange (10301) \/ Refill","offer_id":42003070255167,"sku":"10301 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Sunflower Yellow (10402) \/ Refill","offer_id":42003070287935,"sku":"10402 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"Hot Pink (10204) \/ Filament with spool","offer_id":42003070320703,"sku":"10204","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Pumpkin Orange (10301) \/ Filament with spool","offer_id":42003070353471,"sku":"10301","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Mistletoe Green (10502) \/ Filament with spool","offer_id":42003070386239,"sku":"10502","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Cyan (10603) \/ Filament with spool","offer_id":42003070419007,"sku":"10603","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Indigo Purple (10701) \/ Filament with spool","offer_id":42003070451775,"sku":"10701","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Cocoa Brown (10802) \/ Filament with spool","offer_id":42003070484543,"sku":"10802","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Yellow (10400) \/ Filament with spool","offer_id":42790095388735,"sku":"10400","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Purple (10700) \/ Filament with spool","offer_id":42790095454271,"sku":"10700","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Beige (10201) \/ Filament with spool","offer_id":42790095650879,"sku":"10201","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Sunflower Yellow (10402) \/ Filament with spool","offer_id":42811432042559,"sku":"10402","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Orange (10300) \/ Filament with spool","offer_id":43147219468351,"sku":"10300","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Silver (10102) \/ Filament with spool","offer_id":43147222024255,"sku":"10102","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Brown (10800) \/ Filament with spool","offer_id":43466143858751,"sku":"10800","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Magenta (10202) \/ Filament with spool","offer_id":43466147528767,"sku":"10202","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Gold (10401) \/ Filament with spool","offer_id":43466148479039,"sku":"10401","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Bronze (10801) \/ Filament with spool","offer_id":43466159423551,"sku":"10801","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5347af53-Plabasicbambugreen_700x_1c48cc57-ab9a-4c2f-9cb3-dd0785e89f12.webp?v=1793389586"},{"product_id":"petg-hf","title":"PETG-HF","description":"\u003ch2 data-start=\"149\" data-end=\"207\"\u003eBambu PETG-HF — High-Flow PETG for Fast, Tough Prints\u003c\/h2\u003e\n\u003cp data-start=\"208\" data-end=\"261\"\u003e\u003cstrong data-start=\"208\" data-end=\"261\"\u003eHigh Speed • Strong Layer Bonding • Glossy Finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"263\" data-end=\"277\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"278\" data-end=\"545\"\u003eBambu PETG-HF is a high-flow PETG formulated for faster printing without sacrificing strength. It delivers excellent layer adhesion, impact resistance, and chemical stability—making it a dependable step up from PLA for functional parts, while remaining easy to print.\u003c\/p\u003e\n\u003ch3 data-start=\"547\" data-end=\"571\"\u003eWhy choose PETG-HF\u003c\/h3\u003e\n\u003cp data-start=\"572\" data-end=\"885\"\u003e• \u003cstrong data-start=\"574\" data-end=\"596\"\u003eHigh-flow formula:\u003c\/strong\u003e Supports faster extrusion and shorter print times\u003cbr data-start=\"646\" data-end=\"649\"\u003e• \u003cstrong data-start=\"651\" data-end=\"671\"\u003eTough \u0026amp; durable:\u003c\/strong\u003e Strong layer bonding with good impact resistance\u003cbr data-start=\"720\" data-end=\"723\"\u003e• \u003cstrong data-start=\"725\" data-end=\"744\"\u003eGlossy surface:\u003c\/strong\u003e Clean, professional finish\u003cbr data-start=\"771\" data-end=\"774\"\u003e• \u003cstrong data-start=\"776\" data-end=\"789\"\u003eLow warp:\u003c\/strong\u003e Enclosure optional for most parts\u003cbr data-start=\"823\" data-end=\"826\"\u003e• \u003cstrong data-start=\"828\" data-end=\"847\"\u003eAMS compatible:\u003c\/strong\u003e Works with AMS \/ AMS 2 Pro \/ AMS HT\u003c\/p\u003e\n\u003ch3 data-start=\"887\" data-end=\"922\"\u003eRecommended starting settings\u003c\/h3\u003e\n\u003cp data-start=\"923\" data-end=\"1171\"\u003e• \u003cstrong data-start=\"925\" data-end=\"936\"\u003eNozzle:\u003c\/strong\u003e 235–260 °C (start ~245 °C)\u003cbr data-start=\"963\" data-end=\"966\"\u003e• \u003cstrong data-start=\"968\" data-end=\"976\"\u003eBed:\u003c\/strong\u003e 70–90 °C (start ~80 °C)\u003cbr data-start=\"1000\" data-end=\"1003\"\u003e• \u003cstrong data-start=\"1005\" data-end=\"1013\"\u003eFan:\u003c\/strong\u003e 0–40% after first layers\u003cbr data-start=\"1038\" data-end=\"1041\"\u003e• \u003cstrong data-start=\"1043\" data-end=\"1053\"\u003eSpeed:\u003c\/strong\u003e 60–220 mm\/s\u003cbr data-start=\"1065\" data-end=\"1068\"\u003e• \u003cstrong data-start=\"1070\" data-end=\"1086\"\u003eBuild plate:\u003c\/strong\u003e Smooth or Textured PEI\u003cbr data-start=\"1109\" data-end=\"1112\"\u003e• \u003cstrong data-start=\"1114\" data-end=\"1127\"\u003eAdhesion:\u003c\/strong\u003e Use \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMagigoo\u003c\/strong\u003e\u003c\/span\u003e on smooth PEI \u003cspan style=\"text-decoration: underline;\"\u003eas a release agent\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1173\" data-end=\"1192\"\u003ePrinting tips\u003c\/h3\u003e\n\u003cp data-start=\"1193\" data-end=\"1370\"\u003e• Dry if needed (≈55–60 °C for 4–6 h) to reduce stringing\u003cbr data-start=\"1250\" data-end=\"1253\"\u003e• Lower fan and steady speeds improve gloss and strength\u003cbr data-start=\"1309\" data-end=\"1312\"\u003e• Tune retraction and travel speed for clean transitions\u003c\/p\u003e\n\u003ch3 data-start=\"1372\" data-end=\"1395\"\u003eTypical use cases\u003c\/h3\u003e\n\u003cp data-start=\"1396\" data-end=\"1543\"\u003e• Brackets, fixtures, clips, and shop jigs\u003cbr data-start=\"1438\" data-end=\"1441\"\u003e• Enclosures, organizers, RC and cosplay parts\u003cbr data-start=\"1487\" data-end=\"1490\"\u003e• Functional prints needing more toughness than PLA\u003c\/p\u003e\n\u003ch3 data-start=\"1545\" data-end=\"1566\"\u003eSpecs (typical)\u003c\/h3\u003e\n\u003cp data-start=\"1567\" data-end=\"1736\"\u003e• Diameter: 1.75 mm\u003cbr data-start=\"1586\" data-end=\"1589\"\u003e• Material: PETG (high-flow formulation)\u003cbr data-start=\"1629\" data-end=\"1632\"\u003e• Heat resistance: Higher than PLA (avoid sustained \u0026gt;70–80 °C)\u003cbr data-start=\"1694\" data-end=\"1697\"\u003e• Storage: Keep sealed with desiccant\u003c\/p\u003e\n\u003ch3 data-start=\"1738\" data-end=\"1757\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"1758\" data-end=\"1876\"\u003e• Bambu Lab A1 \/ A1 Mini \/ P1 \/ P2 \/ X1 series\u003cbr data-start=\"1804\" data-end=\"1807\"\u003e• Most 1.75 mm FDM printers\u003cbr data-start=\"1834\" data-end=\"1837\"\u003e• AMS \/ AMS 2 Pro \/ AMS HT compatible\u003c\/p\u003e\n\u003ch3 data-start=\"1878\" data-end=\"1901\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1902\" data-end=\"1940\"\u003e• Filament spool ×1\u003cbr data-start=\"1921\" data-end=\"1924\"\u003e• Desiccant ×1\u003c\/p\u003e\n\u003ch3 data-start=\"1942\" data-end=\"1963\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1964\" data-end=\"2126\"\u003eFilament and consumables are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Black (33102) \/ Filament with spool","offer_id":42003068026943,"sku":"33102","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Black (33102) \/ Refill","offer_id":42003068059711,"sku":"33102 - REFILL","price":18.99,"currency_code":"CAD","in_stock":true},{"title":"White (33100) \/ Filament with spool","offer_id":42003068092479,"sku":"33100","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Gray (33101) \/ Filament with spool","offer_id":42003068158015,"sku":"33101","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (33600) \/ Filament with spool","offer_id":42003068223551,"sku":"33600","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Red (33200) \/ Filament with spool","offer_id":42003068289087,"sku":"33200","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Green (33500) \/ Filament with spool","offer_id":42790092308543,"sku":"33500","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Orange (33300) \/ Filament with spool","offer_id":42790093094975,"sku":"33300","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Yellow (33400) \/ Filament with spool","offer_id":42790093946943,"sku":"33400","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Forest Green (33502) \/ Filament with spool","offer_id":42790094045247,"sku":"33502","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Peanut Brown (33801) \/ Filament with spool","offer_id":42790094176319,"sku":"33801","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Dark Gray (33103) \/ Filament with spool","offer_id":42790094274623,"sku":"33103","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Cream (33401) \/ Filament with spool","offer_id":42790094438463,"sku":"33401","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Lime Green (33501) \/ Filament with spool","offer_id":42790094471231,"sku":"33501","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Lake Blue (33601) \/ Filament with spool","offer_id":42790094503999,"sku":"33601","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3368c5e5-PETG_HF_2_1200x-1.webp?v=1793389819"},{"product_id":"ppa-cf-0-75kg","title":"PPA-CF 0.75KG","description":"\u003ch2 data-start=\"133\" data-end=\"188\"\u003eBambu PPA-CF — Industrial-Grade Carbon Fiber Nylon\u003c\/h2\u003e\n\u003cp data-start=\"189\" data-end=\"270\"\u003e\u003cstrong data-start=\"189\" data-end=\"270\"\u003eMetal-Like Strength • High Heat \u0026amp; Humidity Resistance • Precision Engineering\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"272\" data-end=\"286\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"287\" data-end=\"593\"\u003eBambu PPA-CF is a high-performance carbon-fiber-reinforced nylon engineered for demanding industrial and mechanical applications. It delivers exceptional stiffness, strength, and dimensional stability—while maintaining performance in high-heat and high-humidity environments where standard nylons struggle.\u003c\/p\u003e\n\u003ch3 data-start=\"595\" data-end=\"617\"\u003eProduct features\u003c\/h3\u003e\n\u003cp data-start=\"618\" data-end=\"991\"\u003e• \u003cstrong data-start=\"620\" data-end=\"644\"\u003eMetal-like strength:\u003c\/strong\u003e Up to \u003cstrong data-start=\"651\" data-end=\"667\"\u003e48% stronger\u003c\/strong\u003e and \u003cstrong data-start=\"672\" data-end=\"688\"\u003e102% stiffer\u003c\/strong\u003e than PA6-CF\u003cbr data-start=\"700\" data-end=\"703\"\u003e• \u003cstrong data-start=\"705\" data-end=\"724\"\u003eHeat resistant:\u003c\/strong\u003e Continuous service up to \u003cstrong data-start=\"750\" data-end=\"760\"\u003e227 °C\u003c\/strong\u003e\u003cbr data-start=\"760\" data-end=\"763\"\u003e• \u003cstrong data-start=\"765\" data-end=\"785\"\u003eHumidity stable:\u003c\/strong\u003e Low moisture absorption (~\u003cstrong data-start=\"812\" data-end=\"820\"\u003e1.3%\u003c\/strong\u003e) for consistent mechanical properties\u003cbr data-start=\"858\" data-end=\"861\"\u003e• \u003cstrong data-start=\"863\" data-end=\"883\"\u003ePrecision parts:\u003c\/strong\u003e Minimal warp and creep for tight-tolerance components\u003cbr data-start=\"937\" data-end=\"940\"\u003e• \u003cstrong data-start=\"942\" data-end=\"955\"\u003eDiameter:\u003c\/strong\u003e 1.75 mm ± 0.05 mm (cardboard spool)\u003c\/p\u003e\n\u003ch3 data-start=\"993\" data-end=\"1030\"\u003ePrinter \u0026amp; hardware requirements\u003c\/h3\u003e\n\u003cp data-start=\"1031\" data-end=\"1262\"\u003e• \u003cstrong data-start=\"1033\" data-end=\"1046\"\u003ePrinters:\u003c\/strong\u003e Enclosed systems only (P1S \/ X1 \/ X1E \/ H2 Series)\u003cbr data-start=\"1097\" data-end=\"1100\"\u003e• \u003cstrong data-start=\"1102\" data-end=\"1110\"\u003eAMS:\u003c\/strong\u003e ❌ Not compatible\u003cbr data-start=\"1127\" data-end=\"1130\"\u003e• \u003cstrong data-start=\"1132\" data-end=\"1143\"\u003eNozzle:\u003c\/strong\u003e Hardened steel \u003cstrong data-start=\"1159\" data-end=\"1181\"\u003e0.6 mm recommended\u003c\/strong\u003e (0.4 \/ 0.8 mm optional)\u003cbr data-start=\"1205\" data-end=\"1208\"\u003e• \u003cstrong data-start=\"1210\" data-end=\"1220\"\u003eAvoid:\u003c\/strong\u003e 0.2 mm nozzles and stainless steel tips\u003c\/p\u003e\n\u003ch3 data-start=\"1264\" data-end=\"1299\"\u003eRecommended starting settings\u003c\/h3\u003e\n\u003cp data-start=\"1300\" data-end=\"1557\"\u003e• \u003cstrong data-start=\"1302\" data-end=\"1313\"\u003eDrying:\u003c\/strong\u003e 100–140 °C × 8–12 h (oven preferred)\u003cbr data-start=\"1350\" data-end=\"1353\"\u003e• \u003cstrong data-start=\"1355\" data-end=\"1366\"\u003eNozzle:\u003c\/strong\u003e 280–310 °C\u003cbr data-start=\"1377\" data-end=\"1380\"\u003e• \u003cstrong data-start=\"1382\" data-end=\"1390\"\u003eBed:\u003c\/strong\u003e 100–120 °C (use \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMagigoo\u003c\/strong\u003e\u003c\/span\u003e or glue stick)\u003cbr data-start=\"1418\" data-end=\"1421\"\u003e• \u003cstrong data-start=\"1423\" data-end=\"1433\"\u003eSpeed:\u003c\/strong\u003e ≤ 100 mm\/s\u003cbr data-start=\"1444\" data-end=\"1447\"\u003e• \u003cstrong data-start=\"1449\" data-end=\"1466\"\u003eBuild plates:\u003c\/strong\u003e Smooth or Textured PEI\u003cbr data-start=\"1489\" data-end=\"1492\"\u003e• \u003cstrong data-start=\"1494\" data-end=\"1507\"\u003eHumidity:\u003c\/strong\u003e \u0026lt; 20 % RH (print and store sealed with desiccant)\u003c\/p\u003e\n\u003ch3 data-start=\"1559\" data-end=\"1596\"\u003eMechanical \u0026amp; thermal highlights\u003c\/h3\u003e\n\u003cp data-start=\"1597\" data-end=\"1806\"\u003e• Tensile strength: ~168 MPa\u003cbr data-start=\"1625\" data-end=\"1628\"\u003e• Flexural strength: ~208 MPa\u003cbr data-start=\"1657\" data-end=\"1660\"\u003e• Flexural modulus: ~9860 MPa\u003cbr data-start=\"1689\" data-end=\"1692\"\u003e• Impact strength: ~41.7 kJ\/m²\u003cbr data-start=\"1722\" data-end=\"1725\"\u003e• HDT (0.45 MPa): ~227 °C\u003cbr data-start=\"1750\" data-end=\"1753\"\u003e• Vicat softening: ~232 °C\u003cbr data-start=\"1779\" data-end=\"1782\"\u003e• Density: ~1.25 g\/cm³\u003c\/p\u003e\n\u003ch3 data-start=\"1808\" data-end=\"1828\"\u003ePrinting notes\u003c\/h3\u003e\n\u003cp data-start=\"1829\" data-end=\"2050\"\u003e• Dry thoroughly—moisture will ruin surface quality and strength\u003cbr data-start=\"1893\" data-end=\"1896\"\u003e• Use Magigoo or glue stick for adhesion and plate protection\u003cbr data-start=\"1946\" data-end=\"1949\"\u003e• Higher nozzle temps within range improve layer bonding\u003cbr data-start=\"2005\" data-end=\"2008\"\u003e• Allow parts to cool fully before removal\u003c\/p\u003e\n\u003ch3 data-start=\"2052\" data-end=\"2075\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"2076\" data-end=\"2127\"\u003e• Filament on cardboard spool ×1\u003cbr data-start=\"2108\" data-end=\"2111\"\u003e• Desiccant ×1\u003c\/p\u003e\n\u003ch3 data-start=\"2129\" data-end=\"2150\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2151\" data-end=\"2313\"\u003eFilament and consumables are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003066880063,"sku":"PPA-CF (73100)","price":171.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/79982934-PPA1_900x_4e4401c8-1ca8-448d-9a26-9f847a513208.webp?v=1757004414"},{"product_id":"tpu-for-ams","title":"TPU for AMS","description":"\u003ch2 data-start=\"162\" data-end=\"218\"\u003eBambu TPU for AMS — Flexible, Fast, Multi-Color Ready\u003c\/h2\u003e\n\u003cp data-start=\"220\" data-end=\"282\"\u003e\u003cstrong data-start=\"220\" data-end=\"282\"\u003eLow Stringing • Tough-Flex 68D • AMS \u0026amp; AMS Lite Compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"284\" data-end=\"298\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"299\" data-end=\"614\"\u003eBambu TPU for AMS is engineered for reliable multi-color TPU printing with smooth feeding and clean swaps. With a Shore 68D hardness, it balances flexibility and durability—ideal for protective parts, dampers, grips, and functional components—while printing significantly faster than traditional flexible filaments.\u003c\/p\u003e\n\u003ch3 data-start=\"616\" data-end=\"638\"\u003eProduct features\u003c\/h3\u003e\n\u003cp data-start=\"639\" data-end=\"1036\"\u003e• \u003cstrong data-start=\"641\" data-end=\"670\"\u003eAMS \u0026amp; AMS Lite compatible\u003c\/strong\u003e — dependable feeding for multi-color TPU\u003cbr data-start=\"711\" data-end=\"714\"\u003e• \u003cstrong data-start=\"716\" data-end=\"750\"\u003eTough yet flexible (Shore 68D)\u003c\/strong\u003e — great for cases, bumpers, feet, and guards\u003cbr data-start=\"795\" data-end=\"798\"\u003e• \u003cstrong data-start=\"800\" data-end=\"829\"\u003eLow-stringing formulation\u003c\/strong\u003e — cleaner surfaces and sharper detail\u003cbr data-start=\"867\" data-end=\"870\"\u003e• \u003cstrong data-start=\"872\" data-end=\"894\"\u003eHigh-speed capable\u003c\/strong\u003e — up to ~60% faster than typical TPU 95A HF\u003cbr data-start=\"938\" data-end=\"941\"\u003e• \u003cstrong data-start=\"943\" data-end=\"971\"\u003eReusable high-temp spool\u003c\/strong\u003e — durable, stable handling\u003cbr data-start=\"998\" data-end=\"1001\"\u003e• \u003cstrong data-start=\"1003\" data-end=\"1016\"\u003eDiameter:\u003c\/strong\u003e 1.75 mm ± 0.05 mm\u003c\/p\u003e\n\u003ch3 data-start=\"1038\" data-end=\"1055\"\u003eQuick setup\u003c\/h3\u003e\n\u003cp data-start=\"1056\" data-end=\"1331\"\u003e• \u003cstrong data-start=\"1058\" data-end=\"1077\"\u003eDry before use:\u003c\/strong\u003e 70 °C × 8 h (oven) or 80–90 °C × 12 h (X1 heatbed)\u003cbr data-start=\"1128\" data-end=\"1131\"\u003e• \u003cstrong data-start=\"1133\" data-end=\"1144\"\u003eNozzle:\u003c\/strong\u003e 220–240 °C\u003cbr data-start=\"1155\" data-end=\"1158\"\u003e• \u003cstrong data-start=\"1160\" data-end=\"1168\"\u003eBed:\u003c\/strong\u003e 30–35 °C (with glue)\u003cbr data-start=\"1189\" data-end=\"1192\"\u003e• \u003cstrong data-start=\"1194\" data-end=\"1204\"\u003eSpeed:\u003c\/strong\u003e ≤ 250 mm\/s (slower outer walls for best finish)\u003cbr data-start=\"1252\" data-end=\"1255\"\u003e• \u003cstrong data-start=\"1257\" data-end=\"1276\"\u003eElasticity tip:\u003c\/strong\u003e Fewer walls + lower infill = softer, springier parts\u003c\/p\u003e\n\u003ch3 data-start=\"1333\" data-end=\"1362\"\u003eAccessory compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1363\" data-end=\"1533\"\u003eBuild plates: Smooth PEI, Textured PEI\u003cbr data-start=\"1401\" data-end=\"1404\"\u003eNozzles: 0.4 \/ 0.6 \/ 0.8 mm hardened or 0.4 mm stainless\u003cbr data-start=\"1460\" data-end=\"1463\"\u003eNot recommended: 0.2 mm nozzle\u003cbr data-start=\"1493\" data-end=\"1496\"\u003eAdhesive: Liquid glue or glue stick\u003c\/p\u003e\n\u003ch3 data-start=\"1535\" data-end=\"1558\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1559\" data-end=\"1600\"\u003e• Filament on spool ×1\u003cbr data-start=\"1581\" data-end=\"1584\"\u003e• Desiccant ×1\u003c\/p\u003e\n\u003ch3 data-start=\"1602\" data-end=\"1623\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1624\" data-end=\"1786\"\u003eFilament and consumables are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Black (53101)","offer_id":42003068649535,"sku":"53101","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"White (53100)","offer_id":42003068682303,"sku":"53100","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"Gray (53102)","offer_id":42003068715071,"sku":"53102","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"Yellow (53400)","offer_id":42003068747839,"sku":"53400","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (53600)","offer_id":42003068780607,"sku":"53600","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"Red (53200)","offer_id":42003068813375,"sku":"53200","price":44.99,"currency_code":"CAD","in_stock":true},{"title":"Neon Green (53500)","offer_id":42003068846143,"sku":"53500","price":44.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/37353b94-New_900x_bc3f2f72-14de-4d4b-adb3-09a4f749027a.webp?v=1793392043"},{"product_id":"pla-wood","title":"PLA Wood","description":"\u003ch2 data-start=\"137\" data-end=\"178\"\u003eBambu PLA Wood — Real Wood Look \u0026amp; Feel\u003c\/h2\u003e\n\u003cp data-start=\"180\" data-end=\"230\"\u003e\u003cstrong data-start=\"180\" data-end=\"230\"\u003eNatural Texture • Matte Finish • Easy to Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"232\" data-end=\"246\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"247\" data-end=\"510\"\u003eBambu PLA Wood blends premium PLA with fine wood powder to create prints that look and feel like real wood. It produces a warm, matte surface with subtle grain and natural variation—ideal for décor, models, signage, and design pieces with a handcrafted aesthetic.\u003c\/p\u003e\n\u003ch3 data-start=\"512\" data-end=\"534\"\u003eProduct features\u003c\/h3\u003e\n\u003cp data-start=\"535\" data-end=\"833\"\u003e• \u003cstrong data-start=\"537\" data-end=\"566\"\u003eAuthentic wood appearance\u003c\/strong\u003e with natural grain and tone\u003cbr data-start=\"594\" data-end=\"597\"\u003e• \u003cstrong data-start=\"599\" data-end=\"615\"\u003eMatte finish\u003c\/strong\u003e that hides layer lines and enhances detail\u003cbr data-start=\"658\" data-end=\"661\"\u003e• \u003cstrong data-start=\"663\" data-end=\"698\"\u003eMixes cleanly with standard PLA\u003c\/strong\u003e for creative multi-material prints\u003cbr data-start=\"733\" data-end=\"736\"\u003e• \u003cstrong data-start=\"738\" data-end=\"764\"\u003eLow odor \u0026amp; lightweight\u003c\/strong\u003e with smooth, predictable extrusion\u003cbr data-start=\"799\" data-end=\"802\"\u003e• \u003cstrong data-start=\"804\" data-end=\"833\"\u003eAMS \u0026amp; AMS Lite compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"835\" data-end=\"849\"\u003eCautions\u003c\/h3\u003e\n\u003cp data-start=\"850\" data-end=\"974\"\u003e• Dry before use (55 °C × 8 h)\u003cbr data-start=\"880\" data-end=\"883\"\u003e• Not compatible with 0.2 mm nozzles\u003cbr data-start=\"919\" data-end=\"922\"\u003e• Natural color variation between spools is normal\u003c\/p\u003e\n\u003ch3 data-start=\"976\" data-end=\"1005\"\u003eAccessory compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1006\" data-end=\"1136\"\u003eBuild plates: Smooth PEI, Textured PEI\u003cbr data-start=\"1044\" data-end=\"1047\"\u003eNozzles: 0.4 \/ 0.6 \/ 0.8 mm stainless or hardened\u003cbr data-start=\"1096\" data-end=\"1099\"\u003eAdhesive: Liquid glue or glue stick\u003c\/p\u003e\n\u003ch3 data-start=\"1138\" data-end=\"1161\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1162\" data-end=\"1203\"\u003e• Filament on spool ×1\u003cbr data-start=\"1184\" data-end=\"1187\"\u003e• Desiccant ×1\u003c\/p\u003e\n\u003cp data-start=\"1205\" data-end=\"1287\"\u003e\u003cstrong data-start=\"1205\" data-end=\"1218\"\u003eDiameter:\u003c\/strong\u003e 1.75 mm ± 0.03 mm\u003cbr data-start=\"1236\" data-end=\"1239\"\u003e\u003cstrong data-start=\"1239\" data-end=\"1250\"\u003eFinish:\u003c\/strong\u003e Matte\u003cbr data-start=\"1256\" data-end=\"1259\"\u003e\u003cstrong data-start=\"1259\" data-end=\"1269\"\u003eStyle:\u003c\/strong\u003e Wood-filled PLA\u003c\/p\u003e\n\u003ch3 data-start=\"1289\" data-end=\"1310\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1311\" data-end=\"1473\"\u003eFilament and consumables are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Black Walnut (13107)","offer_id":42003068911679,"sku":"13107","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Rosewood (13204)","offer_id":42003068944447,"sku":"13204","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Clay Brown (13801)","offer_id":42003068977215,"sku":"13801","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Classic Birch (13505)","offer_id":42003069009983,"sku":"13505","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"White Oak (13106)","offer_id":42003069042751,"sku":"13106","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Ochre Yellow (13403)","offer_id":42003069075519,"sku":"13403","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/f7d46083-20241120-094736_900x_841fc908-b3d7-427f-96b1-45f2c6c765de.webp?v=1793392043"},{"product_id":"pla-silk","title":"PLA Silk+","description":"\u003ch2\u003eBambu PLA Silk+ — Chrome-Shine, Silk-Smooth Finish\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGlossy • Tougher Than Standard Silk • AMS Compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePLA Silk+ delivers a bright, metallic silk finish with improved layer bonding compared to typical silk PLA. It’s made for eye-catching parts that still hold together well—perfect for décor, cosplay pieces, trophies, signage, and display models.\u003c\/p\u003e\n\u003ch3\u003eWhy choose PLA Silk+\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh-gloss silk finish\u003c\/strong\u003e with a chrome-like shine\u003cbr\u003e• \u003cstrong\u003eImproved layer adhesion\u003c\/strong\u003e vs. standard silk PLA\u003cbr\u003e• \u003cstrong\u003eVibrant color options\u003c\/strong\u003e, including specialty “Candy” shades\u003cbr\u003e• \u003cstrong\u003eEasy to print\u003c\/strong\u003e on most PLA profiles\u003cbr\u003e• \u003cstrong\u003eAMS \u0026amp; AMS Lite compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003ePrinting notes (quick)\u003c\/h3\u003e\n\u003cp\u003e• Slow outer walls (≤ 50 mm\/s) for best gloss\u003cbr\u003e• Prints like PLA, but \u003cstrong\u003edrying improves finish consistency\u003c\/strong\u003e\u003cbr\u003e• Concentric top layers give the smoothest sheen\u003c\/p\u003e\n\u003ch3\u003eRecommended starting settings\u003c\/h3\u003e\n\u003cp\u003e• Nozzle: 210–240 °C\u003cbr\u003e• Bed (with adhesive): 35–45 °C\u003cbr\u003e• Speed: ≤ 250 mm\/s (outer walls slower for shine)\u003cbr\u003e• Drying: 55 °C × 8 h\u003cbr\u003e• Storage: sealed with desiccant, \u0026lt; 20% RH\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• Diameter: 1.75 mm ± 0.03 mm\u003cbr\u003e• Build plates: Smooth PEI, Textured PEI, SuperTack\u003cbr\u003e• Hotends: 0.2 \/ 0.4 mm recommended for show parts\u003cbr\u003e• Adhesive: Liquid glue or glue stick\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• PLA Silk+ filament spool\u003cbr\u003e• Desiccant\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Display prints where surface finish matters\u003cbr\u003e• Cosplay, décor, awards, and accent parts\u003cbr\u003e• Makers who want \u003cstrong\u003emaximum shine without exotic materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot:\u003c\/strong\u003e Filament and consumables are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Titan Gray (13108)","offer_id":42003071172671,"sku":"13108","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Candy Red (13205)","offer_id":42003071205439,"sku":"13205","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Candy Green (13506)","offer_id":42003071238207,"sku":"13506","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (13604)","offer_id":42003071270975,"sku":"13604","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Purple (13702)","offer_id":42003071303743,"sku":"13702","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Rose Gold (13206)","offer_id":42003071336511,"sku":"13206","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Baby Blue (13603)","offer_id":42003071369279,"sku":"13603","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Mint (13507)","offer_id":42003071402047,"sku":"13507","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Pink (13207)","offer_id":42003071434815,"sku":"13207","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Champagne (13404)","offer_id":42003071467583,"sku":"13404","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"White (13110)","offer_id":42003071500351,"sku":"13110","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Gold (13405)","offer_id":42003071533119,"sku":"13405","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"SIlver (13109)","offer_id":42003071565887,"sku":"13109","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3696cd3a-a6e936cd3be64cec827555490f771b99-scaled.jpg?v=1793389941"},{"product_id":"bambu-lab-a1-3d-printer-combo","title":"Bambu Lab A1 3D Printer Combo","description":"\u003cp\u003eBuy from Winnipeg's authorized Bambu Lab dealer. Pick up at 1692 Dublin Avenue once confirmed in stock, or ship anywhere in Canada, including all of Manitoba.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab A1 (AMS Lite) Combo — Full-Size, Quiet, Multi-Color Ready\u003c\/h2\u003e\n\u003cp\u003eThe A1 (AMS Lite) Combo pairs Bambu’s full-size A1 printer with the AMS Lite, giving you up to four colors or materials out of the box with minimal setup. The A1 comes pre-assembled and runs full auto-calibration before every print, delivering consistent results without manual tuning.\u003c\/p\u003e\n\u003cp\u003eWith a 256 × 256 × 256 mm build volume, a 300 °C all-metal hotend, and a heated bed up to 100 °C, the A1 handles everyday materials with ease while staying compact, quiet, and easy to maintain.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the A1 Combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMulti-color out of the box:\u003c\/strong\u003e AMS Lite supports up to 4 materials\u003cbr\u003e• \u003cstrong\u003eFully automatic calibration:\u003c\/strong\u003e bed leveling, Z-offset, vibration\/flow, belt tension\u003cbr\u003e• \u003cstrong\u003eFull-size build volume:\u003c\/strong\u003e 256 × 256 × 256 mm in a rigid, compact frame\u003cbr\u003e• \u003cstrong\u003eQuiet operation:\u003c\/strong\u003e motor noise cancelling and low-noise mode\u003cbr\u003e• \u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e 1-clip quick-swap nozzle design\u003cbr\u003e• \u003cstrong\u003eClean results:\u003c\/strong\u003e active flow-rate control and intelligent motion\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cp\u003e• All-metal hotend up to 300 °C\u003cbr\u003e• Heated PEI bed up to 100 °C\u003cbr\u003e• Stainless 0.4 mm nozzle installed (supports 0.2 \/ 0.6 \/ 0.8 mm)\u003cbr\u003e• Built-in camera for monitoring and timelapse (low frame rate)\u003cbr\u003e• Filament runout, tangle detection, odometry, and power-loss recovery\u003c\/p\u003e\n\u003ch3\u003eAMS Lite highlights\u003c\/h3\u003e\n\u003cp\u003e• Holds up to 4 spools with automatic switching\u003cbr\u003e• Optimized for PLA-family materials\u003cbr\u003e• Lightweight, open design with smooth feeding\u003cbr\u003e• Tool-free spool changes\u003c\/p\u003e\n\u003ch3\u003eExpansion options\u003c\/h3\u003e\n\u003cp\u003e• Ships with AMS Lite (4 materials)\u003cbr\u003e• A1 Series also supports AMS, AMS 2 Pro, and AMS HT when paired with the Filament Hub – A1 Series (sold separately), allowing higher color\/material counts when properly configured\u003c\/p\u003e\n\u003ch3\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp\u003e• PLA, PETG, TPU, PVA\u003cbr\u003e• Not recommended: ABS, ASA, PC, Nylon, PET, or fiber-reinforced filaments\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• A1 printer (0.4 mm nozzle pre-installed)\u003cbr\u003e• PEI build plate, spool holder, PTFE tube, tools\/accessories\u003cbr\u003e• AMS Lite with stand, spool holders, PTFE tubes, and required cables\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Makers who want simple, reliable multi-color printing at full size\u003cbr\u003e• Schools and offices needing quiet, low-maintenance machines\u003cbr\u003e• Print farms standardizing on consistent, automated output\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup and support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot:\u003c\/strong\u003e 3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003070746687,"sku":"PF002-A+SA005-CA","price":489.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/A1_C-compressed.jpg?v=1793391961"},{"product_id":"bambu-lab-a1-mini-combo-with-ams-lite","title":"Bambu Lab A1 Mini Combo (with AMS lite)","description":"\u003ch2\u003eBambu Lab A1 Mini (AMS Lite) Combo — Compact, Quiet, Multi-Color Ready\u003c\/h2\u003e\n\u003cp\u003eThe A1 Mini (AMS Lite) Combo pairs Bambu’s compact, fully automated desktop printer with the AMS Lite for simple multi-color and multi-material printing right out of the box. With full auto-calibration before every print and a small, quiet footprint, it’s designed for dependable everyday printing with minimal setup.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the A1 Mini Combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMulti-color out of the box:\u003c\/strong\u003e AMS Lite supports up to 4 materials automatically\u003cbr\u003e• \u003cstrong\u003eFully automatic calibration:\u003c\/strong\u003e bed leveling, Z-offset, vibration\/flow, and belt tension before every print\u003cbr\u003e• \u003cstrong\u003eCompact \u0026amp; quiet:\u003c\/strong\u003e ideal for desks, classrooms, and dense print farm layouts\u003cbr\u003e• \u003cstrong\u003eConsistent quality:\u003c\/strong\u003e active flow-rate compensation and intelligent motion control\u003cbr\u003e• \u003cstrong\u003eLow-touch operation:\u003c\/strong\u003e auto filament loading, runout detection, and power-loss recovery\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cp\u003e• 180 × 180 × 180 mm build volume\u003cbr\u003e• All-metal hotend up to 300 °C\u003cbr\u003e• Heated bed up to 80 °C with PEI build plate\u003cbr\u003e• Stainless 0.4 mm nozzle installed (supports 0.2 \/ 0.6 \/ 0.8 mm)\u003cbr\u003e• Built-in camera (low frame rate) for monitoring and timelapse\u003cbr\u003e• Motor noise cancelling for quieter operation\u003c\/p\u003e\n\u003ch3\u003eAMS Lite highlights\u003c\/h3\u003e\n\u003cp\u003e• Holds up to 4 spools with automatic switching\u003cbr\u003e• Lightweight, open-frame design optimized for PLA-family materials\u003cbr\u003e• Smooth feeding with tangle and runout detection\u003cbr\u003e• Simple, tool-free spool changes\u003c\/p\u003e\n\u003ch3\u003eExpansion options\u003c\/h3\u003e\n\u003cp\u003e• Ships with AMS Lite (4 materials)\u003cbr\u003e• Supports additional AMS systems via the Filament Hub – A1 Series (sold separately), including AMS, AMS 2 Pro, and AMS HT, allowing higher material counts when properly configured\u003c\/p\u003e\n\u003ch3\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp\u003e• PLA, PETG, TPU, PVA\u003cbr\u003e• Not recommended: ABS, ASA, PC, Nylon, or fiber-reinforced filaments\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• A1 Mini printer (0.4 mm nozzle pre-installed)\u003cbr\u003e• PEI build plate, spool holder, PTFE tube, tools\/accessories\u003cbr\u003e• AMS Lite with stand, spool holders, PTFE tubes, and required cables\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Makers who want easy, reliable multi-color printing in a small space\u003cbr\u003e• Schools and offices needing quiet, low-maintenance printers\u003cbr\u003e• Print farms scaling compact, consistent machines\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup and support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot:\u003c\/strong\u003e Printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003071008831,"sku":"PF002-M+SA005-CA","price":399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5004620e-5_1400x_8fce01be-b875-4417-86e6-ca67570aae21.webp?v=1793391961"},{"product_id":"bambu-lab-p1s-3d-printer-combo","title":"Bambu Lab P1S 3D Printer Combo","description":"\u003cp\u003eBuy from Winnipeg's authorized Bambu Lab dealer. Pick up at 1692 Dublin Avenue once confirmed in stock, or ship anywhere in Canada, including all of Manitoba.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab P1S (AMS Combo) — Enclosed, Fast, Multi-Color Ready\u003c\/h2\u003e\n\u003cp\u003eThe P1S AMS Combo pairs Bambu’s enclosed CoreXY printer with the \u003cem\u003e\u003cstrong\u003eoriginal\u003c\/strong\u003e\u003c\/em\u003e AMS multi-material system for reliable multi-color and multi-material printing right out of the box. It keeps the proven 256 × 256 × 256 mm build volume, 300 °C all-metal hotend, and 100 °C heated bed—plus an enclosed chamber with tuned cooling and filtration for cleaner, more consistent results.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the AMS Combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMulti-color out of the box:\u003c\/strong\u003e AMS automates spool switching mid-print\u003cbr\u003e• \u003cstrong\u003eIntegrated filament drying:\u003c\/strong\u003e AMS helps keep filament in better condition during long prints and material changes\u003cbr\u003e• \u003cstrong\u003eEnclosed \u0026amp; filtered:\u003c\/strong\u003e stabilized chamber with activated-carbon filtration\u003cbr\u003e• \u003cstrong\u003eFast \u0026amp; consistent:\u003c\/strong\u003e rigid CoreXY motion system built for throughput\u003cbr\u003e• \u003cstrong\u003eSimple workflow:\u003c\/strong\u003e auto calibration, LAN\/Cloud control, and app monitoring\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cp\u003e• 256 × 256 × 256 mm build volume\u003cbr\u003e• All-metal hotend up to 300 °C\u003cbr\u003e• Heated bed up to 100 °C (PEI compatible)\u003cbr\u003e• Stainless 0.4 mm nozzle installed (supports 0.2 \/ 0.6 \/ 0.8 mm)\u003cbr\u003e• Chamber camera (low frame rate) for monitoring and timelapse\u003cbr\u003e• Auxiliary part cooling + chamber regulator fan for stable layers\u003c\/p\u003e\n\u003ch3\u003eAMS highlights\u003c\/h3\u003e\n\u003cp\u003e• Holds 4 spools with automatic switching\u003cbr\u003e• Buffered, low-tangle feeding for smoother swaps\u003cbr\u003e• Humidity-managed handling for more consistent filament performance\u003cbr\u003e• Expandable with additional AMS units using the appropriate hub (up to 16 colors\/materials)\u003c\/p\u003e\n\u003ch3\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp\u003e• PLA, PETG, TPU, PVA\u003cbr\u003e• Engineering-leaning materials supported with proper settings and enclosure use\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• P1S printer (0.4 mm nozzle pre-installed)\u003cbr\u003e• PEI build plate (package dependent), spool holder, PTFE tube, tools\u003cbr\u003e• AMS unit with required cables and accessories\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Makers who want enclosed reliability with multi-color convenience\u003cbr\u003e• Schools and offices needing cleaner, contained printing\u003cbr\u003e• Print farms standardizing on a stable, automated platform\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day pickup when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup and support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot:\u003c\/strong\u003e Printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003070976063,"sku":"PF001-U+SA001-CA","price":629.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/dee71182-Group48168.png?v=1793391961"},{"product_id":"tpu-85a-tpu-90a","title":"TPU 85A \/ TPU 90A","description":"\u003ch2 data-start=\"386\" data-end=\"466\"\u003eBambu TPU 85A \/ TPU 90A — Flexible Filament for Soft, Durable \u0026amp; Hybrid Prints\u003c\/h2\u003e\n\u003cp data-start=\"468\" data-end=\"770\"\u003eBambu TPU 85A and TPU 90A are premium flexible filaments designed for parts that need elasticity, impact absorption, and long-term durability. These materials are ideal for applications where rigid plastics are too stiff—such as grips, vibration dampeners, cushioning components, and flexible housings.\u003c\/p\u003e\n\u003cp data-start=\"772\" data-end=\"987\"\u003eTPU 85A is the softest material in the Bambu lineup, offering maximum flexibility and stretch. TPU 90A is slightly firmer, making it better suited for functional parts that must flex while still holding their shape.\u003c\/p\u003e\n\u003cp data-start=\"989\" data-end=\"1215\"\u003eAll Bambu Lab printers are capable of printing TPU. Because flexible filaments are more sensitive to setup and print conditions, following recommended TPU guidelines is important for achieving consistent, high-quality results.\u003c\/p\u003e\n\u003chr data-start=\"1217\" data-end=\"1220\"\u003e\n\u003ch2 data-start=\"1222\" data-end=\"1269\"\u003eTPU 85A vs TPU 90A — Choosing the Right Flex\u003c\/h2\u003e\n\u003ch3 data-start=\"1271\" data-end=\"1282\"\u003eTPU 85A\u003c\/h3\u003e\n\u003cp data-start=\"1283\" data-end=\"1484\"\u003e• Ultra-soft and highly elastic\u003cbr data-start=\"1314\" data-end=\"1317\"\u003e• Excellent impact absorption and cushioning\u003cbr data-start=\"1361\" data-end=\"1364\"\u003e• Ideal for vibration dampeners, padding, soft grips, and flexible covers\u003cbr data-start=\"1437\" data-end=\"1440\"\u003e• Best for single-material flexible prints\u003c\/p\u003e\n\u003ch3 data-start=\"1486\" data-end=\"1497\"\u003eTPU 90A\u003c\/h3\u003e\n\u003cp data-start=\"1498\" data-end=\"1721\"\u003e• Firmer feel with improved structural support\u003cbr data-start=\"1544\" data-end=\"1547\"\u003e• Better shape retention under load\u003cbr data-start=\"1582\" data-end=\"1585\"\u003e• Ideal for shoe soles, RC tires, flexible hinges, tool grips, and cases\u003cbr data-start=\"1657\" data-end=\"1660\"\u003e• Supports hybrid rigid-flex printing on compatible systems\u003c\/p\u003e\n\u003cp data-start=\"1723\" data-end=\"1839\"\u003eBoth materials offer excellent wear resistance and maintain performance even after repeated bending and compression.\u003c\/p\u003e\n\u003chr data-start=\"1841\" data-end=\"1844\"\u003e\n\u003ch2 data-start=\"1846\" data-end=\"1906\"\u003eMulti-Material Printing via Beam Interlocking (H2C \/ H2D)\u003c\/h2\u003e\n\u003cp data-start=\"1908\" data-end=\"2034\"\u003eTPU 90A supports \u003cstrong data-start=\"1925\" data-end=\"1970\"\u003emulti-material printing with PLA and PETG\u003c\/strong\u003e on compatible dual-nozzle printers such as the \u003cstrong data-start=\"2018\" data-end=\"2033\"\u003eH2C and H2D\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"2036\" data-end=\"2249\"\u003eUsing \u003cstrong data-start=\"2042\" data-end=\"2063\"\u003ebeam interlocking\u003c\/strong\u003e, rigid and flexible materials are mechanically fused during printing—allowing you to create parts that are strong in structure yet soft where needed, without adhesives or post-assembly.\u003c\/p\u003e\n\u003cp data-start=\"2251\" data-end=\"2475\"\u003eCommon hybrid use cases include:\u003cbr\u003e• Tool handles with integrated soft grips\u003cbr data-start=\"2325\" data-end=\"2328\"\u003e• Helmets and protective gear with flexible padding zones\u003cbr data-start=\"2385\" data-end=\"2388\"\u003e• Enclosures with built-in vibration isolation\u003cbr data-start=\"2434\" data-end=\"2437\"\u003e• Wearables and ergonomic components\u003c\/p\u003e\n\u003cp data-start=\"2477\" data-end=\"2588\"\u003eTPU 85A is intended for single-material printing only and does not support rigid-flex multi-material workflows.\u003c\/p\u003e\n\u003chr data-start=\"2590\" data-end=\"2593\"\u003e\n\u003ch2 data-start=\"2595\" data-end=\"2630\"\u003ePrinter \u0026amp; Hardware Compatibility\u003c\/h2\u003e\n\u003cp data-start=\"2632\" data-end=\"3009\"\u003e• Printers: Compatible with all Bambu Lab printers\u003cbr data-start=\"2682\" data-end=\"2685\"\u003e• Dual-material printing:\u003cbr data-start=\"2710\" data-end=\"2713\"\u003e– TPU 90A only, on H2C and H2D\u003cbr data-start=\"2745\" data-end=\"2748\"\u003e• Nozzle recommendations:\u003cbr data-start=\"2773\" data-end=\"2776\"\u003e– TPU 85A: 0.6 mm or larger\u003cbr data-start=\"2805\" data-end=\"2808\"\u003e– TPU 90A: 0.4 mm or larger\u003cbr data-start=\"2837\" data-end=\"2840\"\u003e• Build plates: Smooth PEI Plate, Textured PEI Plate\u003cbr data-start=\"2892\" data-end=\"2895\"\u003e• Adhesion: Magigoo recommended for consistency and plate protection\u003cbr data-start=\"2960\" data-end=\"2963\"\u003e• AMS \/ AMS Lite \/ AMS 2 Pro: Not compatible\u003c\/p\u003e\n\u003chr data-start=\"3011\" data-end=\"3014\"\u003e\n\u003ch2 data-start=\"3016\" data-end=\"3068\"\u003eRecommended Printing Guidelines (Starting Points)\u003c\/h2\u003e\n\u003cp data-start=\"3070\" data-end=\"3384\"\u003e• Dry thoroughly before use\u003cbr data-start=\"3097\" data-end=\"3100\"\u003e• Drying:\u003cbr data-start=\"3109\" data-end=\"3112\"\u003e– 70 °C for 8 hours (dryer)\u003cbr data-start=\"3141\" data-end=\"3144\"\u003e– or extended drying on a heated printer bed\u003cbr data-start=\"3190\" data-end=\"3193\"\u003e• Storage humidity: \u0026lt; 20% RH, sealed with desiccant\u003cbr data-start=\"3244\" data-end=\"3247\"\u003e• Nozzle temperature: 200–250 °C\u003cbr data-start=\"3279\" data-end=\"3282\"\u003e• Bed temperature: 30–35 °C (with glue)\u003cbr data-start=\"3321\" data-end=\"3324\"\u003e• Print speed: Use default TPU profiles; avoid high speeds\u003c\/p\u003e\n\u003cp data-start=\"3386\" data-end=\"3505\"\u003eFlexible filaments require controlled extrusion and smooth motion to prevent buckling, stringing, or inconsistent flow.\u003c\/p\u003e\n\u003chr data-start=\"3507\" data-end=\"3510\"\u003e\n\u003ch2 data-start=\"3512\" data-end=\"3530\"\u003eImportant Notes\u003c\/h2\u003e\n\u003cp data-start=\"3532\" data-end=\"3769\"\u003e• Proper drying is critical for TPU performance\u003cbr data-start=\"3579\" data-end=\"3582\"\u003e• Flexible filaments require more precise setup than rigid materials\u003cbr data-start=\"3650\" data-end=\"3653\"\u003e• TPU 90A is required for rigid-flex multi-material printing\u003cbr data-start=\"3713\" data-end=\"3716\"\u003e• Not compatible with AMS-based multi-color systems\u003c\/p\u003e\n\u003chr data-start=\"3771\" data-end=\"3774\"\u003e\n\u003ch2 data-start=\"3776\" data-end=\"3796\"\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cp data-start=\"3798\" data-end=\"3858\"\u003e• Bambu TPU filament spool (1 kg) ×1\u003cbr data-start=\"3834\" data-end=\"3837\"\u003e• Desiccant pack ×1\u003c\/p\u003e\n\u003chr data-start=\"3860\" data-end=\"3863\"\u003e\n\u003ch2 data-start=\"3865\" data-end=\"3877\"\u003eSetup Tip\u003c\/h2\u003e\n\u003cp data-start=\"3879\" data-end=\"4022\"\u003eClean your build plate using \u003cstrong data-start=\"3908\" data-end=\"3943\"\u003eblue Dawn dish soap + hot water\u003c\/strong\u003e, towel dry fully, then apply glue for reliable adhesion and easy part release.\u003c\/p\u003e\n\u003chr data-start=\"4024\" data-end=\"4027\"\u003e\n\u003ch2 data-start=\"4029\" data-end=\"4047\"\u003ePolicy Snapshot\u003c\/h2\u003e\n\u003cp data-start=\"4049\" data-end=\"4191\"\u003eFilament is final sale. Approved returns on other items must be brand new and unopened. Restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"TPU 90A \/ Frozen (51900)","offer_id":42003071991871,"sku":"51900","price":69.29,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Blaze (51901)","offer_id":42003072024639,"sku":"51901","price":69.29,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ White (51105)","offer_id":42003072057407,"sku":"51105","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Black (51103)","offer_id":42003072090175,"sku":"51103","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Grape Jelly (51700)","offer_id":42814772019263,"sku":"51700","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Crystal Blue (51601)","offer_id":42814772052031,"sku":"51601","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Cocoa Brown (51800)","offer_id":42814772084799,"sku":"51800","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 90A \/ Quicksilver (51106)","offer_id":43042522824767,"sku":"51106","price":48.59,"currency_code":"CAD","in_stock":true},{"title":"TPU 85A \/ Light Cyan (51500)","offer_id":42003072122943,"sku":"51500","price":52.19,"currency_code":"CAD","in_stock":true},{"title":"TPU 85A \/ Neon Orange (51305)","offer_id":42003072155711,"sku":"51305","price":52.19,"currency_code":"CAD","in_stock":true},{"title":"TPU 85A \/ Black (51107)","offer_id":42814772314175,"sku":"51107","price":52.19,"currency_code":"CAD","in_stock":true},{"title":"TPU 85A \/ Flesh (51201)","offer_id":42814772346943,"sku":"51201","price":52.19,"currency_code":"CAD","in_stock":true},{"title":"TPU 85A \/ Lime Green (51501)","offer_id":42814772379711,"sku":"51501","price":52.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/c6a6176e-TPU_90_Frozen-scaled.jpg?v=1757004420"},{"product_id":"bambu-lab-ams-2-pro-automatic-material-system","title":"Bambu Lab AMS 2 Pro - Automatic Material System","description":"\u003ch2\u003eBambu Lab AMS 2 Pro — Smarter Multi-Color, Integrated Drying\u003c\/h2\u003e\n\u003cp\u003eAMS 2 Pro is Bambu Lab’s advanced four-spool material system for reliable multi-color and multi-material printing. It improves filament handling, reduces tangles, and adds active drying support to keep filament in better condition during long or complex prints. Use one for everyday jobs, or connect multiple units with a hub to scale up.\u003c\/p\u003e\n\u003ch3\u003eWhy choose AMS 2 Pro\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003e4-spool automatic switching\u003c\/strong\u003e for color and material changes\u003cbr\u003e• \u003cstrong\u003eIntegrated drying capability\u003c\/strong\u003e with humidity-managed storage\u003cbr\u003e• \u003cstrong\u003eBuffered, low-tangle feeding\u003c\/strong\u003e for smoother swaps and cleaner purges\u003cbr\u003e• \u003cstrong\u003eQuieter, cleaner operation\u003c\/strong\u003e than earlier AMS generations\u003cbr\u003e• \u003cstrong\u003eRFID-enabled spools\u003c\/strong\u003e for automatic filament recognition\u003cbr\u003e• \u003cstrong\u003eExpandable\u003c\/strong\u003e — connect multiple units with a 4-port hub (up to 16 colors\/materials)\u003c\/p\u003e\n\u003ch3\u003eDrying note (important)\u003c\/h3\u003e\n\u003cp\u003e• Active drying \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003erequires the AMS 2 Pro Switching Power Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e• Some printer bundles include it; otherwise it is sold separately\u003cbr\u003e• Printing works without the adapter — drying does not\u003c\/p\u003e\n\u003ch3\u003eCompatibility (quick guide)\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eX1 \/ P1 \/ P2 series\u003c\/strong\u003e\u003cbr\u003e– One AMS 2 Pro: Filament Buffer\u003cbr\u003e– Multiple AMS units: 4-Port AMS Hub\u003cbr\u003e• \u003cstrong\u003eA1 \/ A1 Mini\u003c\/strong\u003e\u003cbr\u003e– Requires Filament Hub – A1 Series\u003cbr\u003e– Mixing AMS Lite with other AMS units on the same hub is not supported\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003e• Multi-color parts, labels, signage, and decorative prints\u003cbr\u003e• Multi-material jobs (rigid + flexible, support materials, etc.)\u003cbr\u003e• Print farms and production workflows needing low-touch automation\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• AMS 2 Pro unit (4-slot)\u003cbr\u003e• 6 PIN Connection cable and internal path components\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e(Filament Buffer, 4-Port AMS Hub, and Switching Power Adapter are sold separately unless bundled.)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003eAMS units, printers, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072352319,"sku":"SA007","price":349.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ams_3.jpg?v=1767373195"},{"product_id":"bambu-lab-ams-ht-automatic-material-system","title":"Bambu Lab AMS HT - Automatic Material System","description":"\u003ch2\u003eBambu Lab AMS HT — High-Temp Drying, Pro Material Handling\u003c\/h2\u003e\n\u003cp\u003eAMS HT is Bambu Lab’s high-temperature material system built for engineering filaments. It actively dries filament, keeps it sealed, and feeds it smoothly to the printer—reducing moisture issues, tangles, and failed prints when working with tougher materials.\u003c\/p\u003e\n\u003ch3\u003eWhy choose AMS HT\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh-temperature active drying\u003c\/strong\u003e to keep filament stable and print-ready\u003cbr\u003e• \u003cstrong\u003eSealed, humidity-controlled storage\u003c\/strong\u003e for consistent performance\u003cbr\u003e• \u003cstrong\u003eSmooth, buffered feeding\u003c\/strong\u003e for reliable material swaps\u003cbr\u003e• \u003cstrong\u003eRFID-enabled spools\u003c\/strong\u003e for automatic filament recognition\u003cbr\u003e• \u003cstrong\u003eExpandable system\u003c\/strong\u003e — connect multiple AMS units with a hub\u003c\/p\u003e\n\u003ch3\u003eCompatibility (quick guide)\u003c\/h3\u003e\n\u003cp\u003e• Works with Bambu Lab printers\u003cbr\u003e• \u003cstrong\u003eX1 \/ P1 \/ P2 \/ X1E series:\u003c\/strong\u003e\u003cbr\u003e– One unit: Filament Buffer\u003cbr\u003e– Multiple units: AMS Hub\u003cbr\u003e• \u003cstrong\u003eA1 \/ A1 Mini:\u003c\/strong\u003e requires Filament Hub – A1 Series\u003cbr\u003e• Not compatible with AMS Lite on the same hub\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003e• Nylon, PC, ASA, CF\/GF-filled filaments\u003cbr\u003e• Long prints where moisture consistency matters\u003cbr\u003e• Multi-material production, fixtures, and functional parts\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• AMS HT unit\u003cbr\u003e• Power and connection cables\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e• For best results, pair with enclosed printers and hardened nozzles\u003cbr\u003e• When using multiple AMS units, follow hub and routing guidelines\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003eAMS units, printers, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072385087,"sku":"SA008-US","price":169.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/ams-2-1_f9e74322-3c24-433a-bc5f-f3b60a5e9c5b.jpg?v=1767373566"},{"product_id":"bambu-lab-h2d","title":"Bambu Lab H2D","description":"\u003ch2\u003eBambu Lab H2D — Dual-Nozzle Power, Large-Format Control\u003c\/h2\u003e\n\u003cp\u003eH2D is Bambu Lab’s large-format, dual-nozzle platform built for fast, repeatable production and flexible workflows. A rigid enclosed frame, closed-loop servo extrusion, and AI-assisted checks deliver clean surfaces and sharp corners at speed. High-temperature hardware and an actively heated chamber make it ready for more demanding materials, while optional toolhead upgrades let you expand beyond 3D printing later.\u003c\/p\u003e\n\u003ch3\u003eWhy choose H2D\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eDual-nozzle system\u003c\/strong\u003e for clean multi-material printing and sharper color breaks\u003cbr\u003e• \u003cstrong\u003eLarge build area\u003c\/strong\u003e for big parts, fixtures, and production jobs\u003cbr\u003e• \u003cstrong\u003eHigh-temperature performance\u003c\/strong\u003e with a 350 °C hotend and heated chamber (~65 °C)\u003cbr\u003e• \u003cstrong\u003eServo-driven extrusion\u003c\/strong\u003e for stable flow and accurate retractions\u003cbr\u003e• \u003cstrong\u003eSmart monitoring\u003c\/strong\u003e with AI start checks and built-in cameras\u003cbr\u003e• \u003cstrong\u003eUpgradeable platform\u003c\/strong\u003e with optional laser and digital cutting modules\u003c\/p\u003e\n\u003ch3\u003eBuild volume\u003c\/h3\u003e\n\u003cp\u003e• Single-nozzle area: \u003cstrong\u003e325 × 320 × 325 mm\u003c\/strong\u003e\u003cbr\u003e• Dual-nozzle area (each): \u003cstrong\u003e~300 × 320 × 325 mm\u003c\/strong\u003e\u003cbr\u003e• Total X travel across both nozzles: \u003cstrong\u003eup to 350 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey specs (summary)\u003c\/h3\u003e\n\u003cp\u003e• CoreXY motion with vibration and flow compensation\u003cbr\u003e• All-metal hotend to 350 °C (hardened 0.4 mm nozzle installed)\u003cbr\u003e• Heated bed to ~120 °C; PEI build plate support\u003cbr\u003e• Actively heated chamber to ~65 °C\u003cbr\u003e• Integrated lighting, monitoring camera, and touchscreen interface\u003c\/p\u003e\n\u003ch3\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp\u003e• PLA, PETG, TPU, PVA\u003cbr\u003e• ABS, ASA, PC, PA (Nylon), and fiber-reinforced filaments with proper settings\u003c\/p\u003e\n\u003ch3\u003eMulti-material options\u003c\/h3\u003e\n\u003cp\u003e• Prints single-color out of the box (printer-only configuration)\u003cbr\u003e• Add AMS 2 Pro or AMS HT with the appropriate hub for automated multi-material printing\u003c\/p\u003e\n\u003ch3\u003eOptional upgrades (sold separately)\u003c\/h3\u003e\n\u003cp\u003e• Laser engraving \/ cutting modules\u003cbr\u003e• Digital cutting \/ plotting toolhead\u003cbr\u003e• Vision Encoder calibration accessory for high-accuracy large prints\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003eH2D printer with hardened 0.4 mm nozzle, PEI build plate, spool holder, PTFE tube, power and accessory kit, basic tools.\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Shops and print farms producing large or technical parts\u003cbr\u003e• Schools and makerspaces wanting an enclosed, expandable platform\u003cbr\u003e• Users upgrading from single-nozzle systems to professional workflows\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072417855,"sku":"PF003-D-US","price":1949.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/2eea69c5-ProductH2D-Picture1.jpg?v=1793820714"},{"product_id":"bambu-lab-h2d-ams-combo","title":"Bambu Lab H2D AMS Combo","description":"\u003ch2\u003eBambu Lab H2D (AMS 2 Pro Combo) — Dual-Nozzle, Large-Format, Multi-Color\u003c\/h2\u003e\n\u003cp\u003eThe H2D AMS 2 Pro Combo delivers large-format, dual-nozzle printing with automated multi-color and multi-material capability out of the box. A rigid enclosed frame, closed-loop servo extrusion, and AI-assisted checks keep prints clean and consistent, while high-temperature hardware opens the door to tougher materials.\u003c\/p\u003e\n\u003ch3\u003eWhy choose this combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eDual-nozzle printing\u003c\/strong\u003e for cleaner supports, color separation, and fewer purges\u003cbr\u003e• \u003cstrong\u003eMulti-color ready\u003c\/strong\u003e with AMS 2 Pro; expand with a 4-port hub and additional AMS units\u003cbr\u003e• \u003cstrong\u003eLarge build volume\u003c\/strong\u003e for helmets, fixtures, props, and production parts\u003cbr\u003e• \u003cstrong\u003eHigh-temperature capability\u003c\/strong\u003e: 350 °C hotend, ~65 °C heated chamber, ~120 °C bed\u003cbr\u003e• \u003cstrong\u003eLow-touch workflow\u003c\/strong\u003e with auto checks, cameras, and motion\/flow compensation\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cp\u003e• Closed-loop servo extruder for stable high-flow printing\u003cbr\u003e• Quick-swap hotend; hardened 0.4 mm nozzle installed\u003cbr\u003e• Integrated lighting and cameras for monitoring and timelapse\u003cbr\u003e• Large touchscreen with LAN\/Cloud control\u003cbr\u003e• Optional upgrades (sold separately): laser modules, Vision Encoder calibration\u003c\/p\u003e\n\u003ch3\u003eCore specs (summary)\u003c\/h3\u003e\n\u003cp\u003e• Build volume (single nozzle): ~325 × 320 × 325 mm\u003cbr\u003e• Dual-nozzle area (each): ~300 × 320 × 325 mm\u003cbr\u003e• Motion system: rigid CoreXY\u003cbr\u003e• Power: 100–120 V (CA\/US)\u003c\/p\u003e\n\u003ch3\u003eAMS 2 Pro highlights\u003c\/h3\u003e\n\u003cp\u003e• Holds \u003cstrong\u003e4 spools\u003c\/strong\u003e with automatic switching\u003cbr\u003e• Buffered, low-tangle filament handling\u003cbr\u003e• Expandable up to \u003cstrong\u003e16 colors\/materials\u003c\/strong\u003e with hub + multiple AMS units\u003c\/p\u003e\n\u003ch3\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp\u003e• PLA, PETG, TPU, PVA\u003cbr\u003e• ABS, ASA, PC, PA (Nylon), CF\/GF-reinforced materials with chamber heat and hardened nozzles\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• H2D printer (0.4 mm hardened nozzle installed), PEI build plate, tools\u003cbr\u003e• AMS 2 Pro with required cables and hardware\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Shops and print farms producing large or multi-material parts\u003cbr\u003e• Schools and makerspaces needing enclosed, reliable throughput\u003cbr\u003e• Users upgrading from single-nozzle platforms to cleaner multi-material workflows\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolicy snapshot\u003c\/strong\u003e\u003cbr\u003e3D printers, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003072450623,"sku":"PF003-D+SA007-US","price":2149.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/H2DC-compressed.jpg?v=1793391961"},{"product_id":"bambu-lab-h2d-laser-full-combo","title":"Bambu Lab H2D Laser Full Combo","description":"\u003ch2\u003eBambu Lab H2D (Laser Combo) — 3D Print, Engrave \u0026amp; Cut on One Platform\u003c\/h2\u003e\n\u003cp\u003eThe H2D Laser Combo adds a swappable laser toolhead to Bambu’s large-format, dual-nozzle 3D printer, turning it into a true personal manufacturing system. Print large parts, then switch to laser engraving or cutting in minutes—no second machine required.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Laser Combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eTwo machines in one\u003c\/strong\u003e: quick-swap between dual-nozzle 3D printing and laser work\u003cbr\u003e• \u003cstrong\u003eChoose your laser power\u003c\/strong\u003e\u003cbr\u003e– \u003cstrong\u003e10 W\u003c\/strong\u003e: fine engraving, text, logos, light cutting (thin wood, cardboard, leather, paper)\u003cbr\u003e– \u003cstrong\u003e40 W\u003c\/strong\u003e: faster jobs and deeper cuts on thicker plywood and denser materials\u003cbr\u003e• \u003cstrong\u003eLarge working area\u003c\/strong\u003e for bigger parts and sheet work\u003cbr\u003e• \u003cstrong\u003eEnclosed \u0026amp; safety-focused\u003c\/strong\u003e: interlocks, exhaust connection points, integrated cameras\u003cbr\u003e• \u003cstrong\u003ePredictable results\u003c\/strong\u003e: assisted setup, presets, lighting, and monitoring\u003c\/p\u003e\n\u003ch3\u003e3D printing platform (included)\u003c\/h3\u003e\n\u003cp\u003e• Dual-nozzle system for supports or multi-material work\u003cbr\u003e• Closed-loop servo extrusion for clean walls and sharp corners\u003cbr\u003e• Hotend up to \u003cstrong\u003e350 °C\u003c\/strong\u003e, bed to \u003cstrong\u003e~120 °C\u003c\/strong\u003e, active chamber heat to \u003cstrong\u003e~65 °C\u003c\/strong\u003e\u003cbr\u003e• Auto calibration, vibration\/flow compensation, AI start checks\u003c\/p\u003e\n\u003ch3\u003eCore specs (summary)\u003c\/h3\u003e\n\u003cp\u003e• Print volume (single nozzle): ~325 × 320 × 325 mm\u003cbr\u003e• Dual-nozzle printable area (each): ~300 × 320 × 325 mm\u003cbr\u003e• Motion system: rigid CoreXY\u003cbr\u003e• Interface: touchscreen + LAN\/Cloud control\u003cbr\u003e• Integrated cameras and lighting\u003c\/p\u003e\n\u003ch3\u003eLaser materials (guidance)\u003c\/h3\u003e\n\u003cp\u003e• Wood, cardboard, paper, leather, fabrics, and \u003cstrong\u003everified laser-safe opaque plastics\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eDo not use\u003c\/strong\u003e PVC\/vinyl or unverified plastics\u003cbr\u003e• Use proper exhaust, filtration, and test passes for best results\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• H2D 3D printer (0.4 mm hardened nozzle installed)\u003cbr\u003e• Laser module (\u003cstrong\u003e10 W or 40 W\u003c\/strong\u003e, selected at purchase)\u003cbr\u003e• PEI build plate, cabling, mounting hardware, safety key, tools\u003c\/p\u003e\n\u003ch3\u003eWho it’s for\u003c\/h3\u003e\n\u003cp\u003e• Shops and makers wanting one enclosed machine for printing and laser work\u003cbr\u003e• Schools and makerspaces adding multi-process capability\u003cbr\u003e• Print farms handling engraving, labeling, fixtures, or packaging in-house\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety \u0026amp; policy\u003c\/strong\u003e\u003cbr\u003eUse approved materials, proper exhaust, and eye protection when operating the laser.\u003cbr\u003ePrinters, laser modules, AMS units, and filament are final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"10W","offer_id":42003072548927,"sku":"PF003-M+SA007-US \u0026 SL001","price":2599.0,"currency_code":"CAD","in_stock":true},{"title":"40W","offer_id":42003072581695,"sku":"PF003-M+SA007-US \u0026 SL002","price":3249.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/H2DL-10w-compressed.jpg?v=1793391961"},{"product_id":"panda-touch-screen-v1-1-1","title":"Panda Touch Screen V1.1.1","description":"\u003ch2\u003eBIGTREETECH Panda Touch V1.1.1 — 5\" Touch Screen for Bambu X1 \/ P1 \/ A1\u003c\/h2\u003e\n\u003cp\u003eMulti-Printer Control • Wi-Fi • Magnetic Charging\u003c\/p\u003e\n\u003cp\u003eUpgrade your setup with the \u003cstrong\u003ePanda Touch\u003c\/strong\u003e, a \u003cstrong\u003e5-inch touchscreen\u003c\/strong\u003e made for \u003cstrong\u003eBambu X1, P1, and A1\u003c\/strong\u003e printers. Manage multiple printers, control AMS functions, and monitor prints wirelessly—all from one sleek, magnetic-charging display.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePlug-and-play:\u003c\/strong\u003e Quick install; works as a drop-in screen for P1P\/P1S\u003cbr\u003e• \u003cstrong\u003eMulti-printer control:\u003c\/strong\u003e Manage up to \u003cstrong\u003e10 printers\u003c\/strong\u003e at once\u003cbr\u003e• \u003cstrong\u003eWireless connection:\u003c\/strong\u003e Easy setup via Wi-Fi\u003cbr\u003e• \u003cstrong\u003eAMS access:\u003c\/strong\u003e One-touch control for multi-color printing\u003cbr\u003e• \u003cstrong\u003eMagnetic charging:\u003c\/strong\u003e Clean and portable power solution\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong\u003eX1 \/ X1C \/ X1E \/ P1P \/ P1S \/ A1 \/ A1 Mini\u003c\/strong\u003e\u003cbr\u003e• Works with firmware versions up to:\u003cbr\u003e– P1P \/ P1S v01.07.00.00 – X1C v01.08.02.00\u003cbr\u003e– X1E v01.01.02.00 – A1 v01.03.01.02 – A1 Mini v01.04.00.00\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eUpdating beyond these firmware versions may limit functionality. Always check \u003cstrong\u003ebttwiki.com\/PandaTouch.html\u003c\/strong\u003e before updating.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePanda Touch 5\" screen (V1.1.1)\u003c\/strong\u003e\u003cbr\u003e• Magnetic charging dock\/cable\u003cbr\u003e• Mounting hardware (varies by model)\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over \u003cstrong\u003e$60\u003c\/strong\u003e\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eElectronics and accessories are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_1.png?v=1705485832\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_2.png?v=1705485840\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_3.png?v=1705485848\"\u003e\u003cimg alt=\"5'' IPS Touch Screen\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_4__20240201.png?v=1706754834\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_5.png?v=1705485870\"\u003e\u003cimg alt=\"AMS Management\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_6__20240126.png?v=1706750118\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_7.png?v=1705485887\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_8.png?v=1705485895\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_9.png?v=1705485902\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_10.png?v=1705485908\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaTouchproductpage_13__20240126.png?v=1706317737\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072614463,"sku":"BQTOUCH","price":75.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/d3647038-PandaTouchimage_1.webp?v=1757004424"},{"product_id":"panda-hub-usb-adapter","title":"Panda Hub USB Adapter","description":"\u003ch2\u003eBIGTREETECH Panda Hub — Dual USB Adapter for Bambu P1S \/ P1P\u003c\/h2\u003e\n\u003cp\u003eDual USB Expansion • Port Protection • Easy Mount\u003c\/p\u003e\n\u003cp\u003eAdd extra USB connectivity to your Bambu printer. The \u003cstrong\u003ePanda Hub\u003c\/strong\u003e gives you \u003cstrong\u003etwo USB ports\u003c\/strong\u003e for accessories like Panda Touch or LED lights while \u003cstrong\u003eprotecting the factory USB\u003c\/strong\u003e from wear and damage.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eDual ports:\u003c\/strong\u003e Connect two devices at once\u003cbr\u003e• \u003cstrong\u003ePort protection:\u003c\/strong\u003e Extends life of the original USB\u003cbr\u003e• \u003cstrong\u003eEasy install:\u003c\/strong\u003e Mounts cleanly with screws and custom brackets for P1P \/ P1S\u003cbr\u003e• \u003cstrong\u003eStable connection:\u003c\/strong\u003e Secure fit, no loose plugs or stress on the stock port\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• Bambu \u003cstrong\u003eP1P \/ P1S\u003c\/strong\u003e\u003cbr\u003e• Works with Panda Touch, LED light bar, and most USB accessories\u003c\/p\u003e\n\u003ch3\u003eWhat’s included\u003c\/h3\u003e\n\u003cp\u003e• Panda Hub dual USB adapter\u003cbr\u003e• P1P \/ P1S mounting brackets\u003cbr\u003e• Screws and nuts for installation\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over \u003cstrong\u003e$60\u003c\/strong\u003e\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eAccessories and consumables are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e  \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/1030000158-Panda_Hub_EN_1.jpg?v=1718879366\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072712767,"sku":"BQHUB","price":6.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/bc574c70-1030000158-Panda_Hub_1000_10.webp?v=1757004423"},{"product_id":"panda-jetpack-v1-0","title":"Panda Jetpack V1.0","description":"\u003ch2 data-start=\"0\" data-end=\"87\"\u003eBIQU Panda Jetpack — Lightweight Hollow Front Cover + Panda Jet Fan Duct (P1 \/ X1)\u003c\/h2\u003e\n\u003cp data-start=\"88\" data-end=\"144\"\u003eIntegrated Part Cooling • Low Mass • Clean Cable Routing\u003c\/p\u003e\n\u003cp data-start=\"146\" data-end=\"452\"\u003eGive your Bambu toolhead a sleek, lightweight \u003cstrong data-start=\"192\" data-end=\"207\"\u003efront cover\u003c\/strong\u003e with an \u003cstrong data-start=\"216\" data-end=\"253\"\u003eintegrated Panda Jet cooling duct\u003c\/strong\u003e. The hollow-frame design trims weight for snappier moves while channeling airflow precisely to the nozzle zone—great for sharper overhangs, bridges, and small features on \u003cstrong data-start=\"425\" data-end=\"431\"\u003eP1\u003c\/strong\u003e and \u003cstrong data-start=\"436\" data-end=\"442\"\u003eX1\u003c\/strong\u003e printers.\u003c\/p\u003e\n\u003ch3 data-start=\"454\" data-end=\"473\"\u003eWhy you need it\u003c\/h3\u003e\n\u003cp data-start=\"474\" data-end=\"797\"\u003e• \u003cstrong data-start=\"476\" data-end=\"497\"\u003eTargeted cooling:\u003c\/strong\u003e Duct focuses airflow at the melt zone for cleaner details\u003cbr data-start=\"555\" data-end=\"558\"\u003e• \u003cstrong data-start=\"560\" data-end=\"582\"\u003eLightweight shell:\u003c\/strong\u003e Hollow cover reduces moving mass for smoother acceleration\u003cbr data-start=\"641\" data-end=\"644\"\u003e• \u003cstrong data-start=\"646\" data-end=\"661\"\u003eTidy setup:\u003c\/strong\u003e Integrated routing keeps the front of the toolhead clean\u003cbr data-start=\"718\" data-end=\"721\"\u003e• \u003cstrong data-start=\"723\" data-end=\"740\"\u003eDrop-in look:\u003c\/strong\u003e Matches the Bambu aesthetic with a low-profile faceplate\u003c\/p\u003e\n\u003ch3 data-start=\"799\" data-end=\"816\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"817\" data-end=\"956\"\u003e• \u003cstrong data-start=\"819\" data-end=\"832\"\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong data-start=\"839\" data-end=\"869\"\u003eP1P \/ P1S \/ X1 \/ X1 Carbon\u003c\/strong\u003e\u003cbr data-start=\"869\" data-end=\"872\"\u003e• \u003cstrong data-start=\"874\" data-end=\"889\"\u003eWorks with:\u003c\/strong\u003e Stock hotend\/duct mounting pattern; typical 24 V part-cooling fan*\u003c\/p\u003e\n\u003cp data-start=\"958\" data-end=\"1046\"\u003e*Use the fan specified by BIQU\/Panda Jet guidelines. Reuse OEM screws where applicable.\u003c\/p\u003e\n\u003ch3 data-start=\"1048\" data-end=\"1065\"\u003eInstall notes\u003c\/h3\u003e\n\u003cp data-start=\"1066\" data-end=\"1251\"\u003e• Power off and cool the toolhead\u003cbr data-start=\"1099\" data-end=\"1102\"\u003e• Remove the stock front cover\/duct → position Jetpack → secure with OEM fasteners\u003cbr data-start=\"1184\" data-end=\"1187\"\u003e• Verify fan spin and airflow direction; run a short bridge test\u003c\/p\u003e\n\u003ch3 data-start=\"1253\" data-end=\"1274\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1275\" data-end=\"1387\"\u003e• \u003cstrong data-start=\"1277\" data-end=\"1306\"\u003ePanda Jetpack front cover\u003c\/strong\u003e with integrated \u003cstrong data-start=\"1323\" data-end=\"1341\"\u003ePanda Jet duct\u003c\/strong\u003e\u003cbr data-start=\"1341\" data-end=\"1344\"\u003e• Basic mounting hardware (batch dependent)\u003c\/p\u003e\n\u003ch3 data-start=\"1389\" data-end=\"1408\"\u003eProduct details\u003c\/h3\u003e\n\u003cp data-start=\"1409\" data-end=\"1620\"\u003e• \u003cstrong data-start=\"1411\" data-end=\"1422\"\u003eDesign:\u003c\/strong\u003e Lightweight hollow structure with directed airflow channels\u003cbr data-start=\"1482\" data-end=\"1485\"\u003e• \u003cstrong data-start=\"1487\" data-end=\"1500\"\u003eFunction:\u003c\/strong\u003e Improved part cooling, reduced mass, cleaner cable\/loom presentation\u003cbr data-start=\"1569\" data-end=\"1572\"\u003e• \u003cstrong data-start=\"1574\" data-end=\"1585\"\u003eFinish:\u003c\/strong\u003e Matte, toolhead-matched appearance\u003c\/p\u003e\n\u003ch3 data-start=\"1622\" data-end=\"1670\"\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp data-start=\"1671\" data-end=\"1850\"\u003e• Same-day or next-business-day dispatch when in stock\u003cbr data-start=\"1725\" data-end=\"1728\"\u003e• Free Winnipeg courier on eligible orders over \u003cstrong data-start=\"1776\" data-end=\"1783\"\u003e$50\u003c\/strong\u003e\u003cbr data-start=\"1783\" data-end=\"1786\"\u003e• In-store pickup available — quick setup tips from active users\u003c\/p\u003e\n\u003ch3 data-start=\"1852\" data-end=\"1871\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1872\" data-end=\"2080\"\u003eAccessories and consumables are \u003cstrong data-start=\"1904\" data-end=\"1918\"\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong data-start=\"1960\" data-end=\"1980\"\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_1.jpg?v=1724325140\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_2.jpg?v=1724325155\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_3.jpg?v=1724325155\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_4.jpg?v=1724325155\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_5.jpg?v=1724325155\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_6__20240827.jpg?v=1724744740\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/EN_7__20240826.jpg?v=1724741747\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072647231,"sku":"BQJETPACK","price":30.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/2428f247-6_23897cfe-5000-45c1-b482-63256b96b711.webp?v=1757004424"},{"product_id":"panda-extruder-for-p1-x1","title":"Panda Extruder for P1\/X1","description":"\u003ch2\u003eBIQU Panda Extruder — CNC Hollow-Carved Lightweight Housing (P1 \/ X1)\u003c\/h2\u003e\n\u003cp\u003e6061-T6 Aluminum • Open-Frame Cooling • Drop-In Fit\u003c\/p\u003e\n\u003cp\u003eSwap your stock shell for a \u003cstrong\u003eprecision-milled 6061-T6 aluminum\u003c\/strong\u003e housing that’s lighter, stiffer, and cooler. The \u003cstrong\u003ehollow-carved frame\u003c\/strong\u003e cuts mass for cleaner high-speed motion, while the open layout helps shed heat during long prints. A clean \u003cstrong\u003eanodized finish\u003c\/strong\u003e adds durability and a pro look—built for \u003cstrong\u003eBambu Lab P1 \/ X1\u003c\/strong\u003e printers.\u003c\/p\u003e\n\u003ch3\u003eWhy you need it\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh-speed ready:\u003c\/strong\u003e Reduced moving mass = smoother travel and better resonance control\u003cbr\u003e• \u003cstrong\u003eRigid \u0026amp; precise:\u003c\/strong\u003e CNC aluminum resists flex for consistent extrusion alignment\u003cbr\u003e• \u003cstrong\u003eRuns cooler:\u003c\/strong\u003e Vented design helps motor and drive stay stable on long jobs\u003cbr\u003e• \u003cstrong\u003eTough finish:\u003c\/strong\u003e Anodized surface resists scuffs and corrosion\u003cbr\u003e• \u003cstrong\u003ePlug-and-play:\u003c\/strong\u003e Works with OEM gears and popular BIQU upgrades\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong\u003eP1P \/ P1S \/ X1 \/ X1 Carbon\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eWorks with:\u003c\/strong\u003e OEM extruder, \u003cstrong\u003ePanda Claw\u003c\/strong\u003e gear, \u003cstrong\u003ePanda Revo\u003c\/strong\u003e, \u003cstrong\u003ePanda Jet\u003c\/strong\u003e (and similar)\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cp\u003e• Power off and cool the toolhead\u003cbr\u003e• Transfer the stock extruder internals into the new housing; \u003cstrong\u003ereuse OEM fasteners\u003c\/strong\u003e\u003cbr\u003e• Verify gear mesh and idler tension, then run a short purge test\u003cbr\u003e• Optional: run \u003cstrong\u003eresonance\/autotune\u003c\/strong\u003e after any motion-mass change\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eCNC 6061-T6 extruder housing\u003c\/strong\u003e (anodized)\u003cbr\u003e• Basic mounting hardware (batch dependent)\u003c\/p\u003e\n\u003ch3\u003eProduct details\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 aluminum, hollow-carved\u003cbr\u003e• \u003cstrong\u003eFinish:\u003c\/strong\u003e Hard anodized (color may vary by batch)\u003cbr\u003e• \u003cstrong\u003eDesign:\u003c\/strong\u003e Open-frame for mass reduction and heat dissipation\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over \u003cstrong\u003e$60\u003c\/strong\u003e\u003cbr\u003e• In-store pickup available — install tips from active users\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eAccessories and consumables are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/1060000728-Panda_Extruder_EN_1__20241219.jpg?v=1738830189\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072745535,"sku":"BQEXTRUDER","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/2c9cafd3-1060000728-PandaExtruder_800_1.webp?v=1757004423"},{"product_id":"panda-claw-for-p1-x1","title":"Panda Claw for P1\/X1","description":"\u003ch2\u003eBIQU Panda Claw Extruder Gear Set — Bambu \u003cstrong\u003eX1 \/ P1 Series\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eGolden Nano-Coated Hardened Steel Gear • CNC Aluminum Support\u003c\/p\u003e\n\u003cp\u003eUpgrade your drive system for stronger bite and steadier flow. The \u003cstrong\u003ePanda Claw\u003c\/strong\u003e pairs a \u003cstrong\u003egolden nano-coated, hardened-steel\u003c\/strong\u003e gear with a \u003cstrong\u003eCNC-machined aluminum\u003c\/strong\u003e support to reduce slip, improve retractions, and extend service life on \u003cstrong\u003eX1\u003c\/strong\u003e and \u003cstrong\u003eP1\u003c\/strong\u003e printers.\u003c\/p\u003e\n\u003ch3\u003eWhy you need it\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh grip, low slip:\u003c\/strong\u003e Positive filament traction for clean starts \u0026amp; consistent walls\u003cbr\u003e• \u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Hardened steel + nano coat resists wear and corrosion\u003cbr\u003e• \u003cstrong\u003eRigid alignment:\u003c\/strong\u003e CNC aluminum support keeps meshing precise under load\u003cbr\u003e• \u003cstrong\u003eCleaner surfaces:\u003c\/strong\u003e More stable extrusion = fewer blobs\/zits and smoother seams\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong\u003eX1 \/ X1 Carbon \/ P1P \/ P1S\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eFilaments:\u003c\/strong\u003e PLA, PETG, ABS\/ASA, TPU; works with many filled materials*\u003cbr\u003e*Abrasive CF\/GF filaments accelerate wear on nozzles; keep filament dry for best grip.\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cp\u003e• Power off and cool toolhead\u003cbr\u003e• Note gear orientation, swap components, re-tension the idler\u003cbr\u003e• Run a short purge; in Bambu Studio, perform \u003cstrong\u003eFlow\/Pressure Advance\u003c\/strong\u003e tuning if needed\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHardened-steel claw gear (gold nano-coat)\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eCNC aluminum support\/bracket\u003c\/strong\u003e\u003cbr\u003e• Basic fasteners (batch dependent)\u003c\/p\u003e\n\u003ch3\u003eProduct details\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMaterial (gear):\u003c\/strong\u003e Hardened steel with gold nano coating\u003cbr\u003e• \u003cstrong\u003eMaterial (support):\u003c\/strong\u003e CNC-machined aluminum\u003cbr\u003e• \u003cstrong\u003eFunction:\u003c\/strong\u003e Increased traction, durability, and extrusion stability\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over \u003cstrong\u003e$60\u003c\/strong\u003e\u003cbr\u003e• In-store pickup available — install tips from active users\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eAccessories and consumables are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda_Claw_20240918_EN_1.jpg?v=1726653976\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072778303,"sku":"BQCLAW-P1\/X1","price":23.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5f7611e1-1060000712-Panda_Claw_X1P1_20240902_1000_2.webp?v=1757004423"},{"product_id":"panda-knomi-screen-with-case-combo","title":"Panda Knomi Screen (With Case Combo)","description":"\u003ch2\u003eBIGTREETECH Panda Knomi — Smart Display Companion for Bambu Lab\u003c\/h2\u003e\n\u003cp\u003eWireless Control • Custom GIFs • Plug-and-Play on A1 \/ P1 \/ X1\u003c\/p\u003e\n\u003cp\u003eAdd a head-mounted, glanceable screen to your Bambu printer. \u003cstrong\u003ePanda Knomi\u003c\/strong\u003e shows real-time status, pairs over Wi-Fi, supports \u003cstrong\u003ecustom GIFs\u003c\/strong\u003e, and updates via \u003cstrong\u003eOTA\u003c\/strong\u003e—all in a sleek matte-transparent shell.\u003c\/p\u003e\n\u003ch3\u003eWhy you need it\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eAt-a-glance metrics:\u003c\/strong\u003e Progress, temps, time remaining, alerts\u003cbr\u003e• \u003cstrong\u003eWireless control:\u003c\/strong\u003e Quick Wi-Fi pairing for monitoring \u0026amp; basic actions\u003cbr\u003e• \u003cstrong\u003ePersonalize it:\u003c\/strong\u003e Upload animated \u003cstrong\u003eGIFs\u003c\/strong\u003e for custom feedback\u003cbr\u003e• \u003cstrong\u003eEasy power:\u003c\/strong\u003e Draws from the printer’s native port (no extra cables)\u003cbr\u003e• \u003cstrong\u003eFuture-ready:\u003c\/strong\u003e OTA firmware adds features over time\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; usage guide\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong\u003eA1 \/ A1 Mini \/ P1 Series \/ X1 Series\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eMounting:\u003c\/strong\u003e Head-mount form factor; supports printable mounts and accessories\u003cbr\u003e• \u003cstrong\u003eSetup:\u003c\/strong\u003e Pair to Wi-Fi → open web page → upload GIFs \/ adjust settings\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePanda Knomi smart display\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eClear A1 \/ A1 Mini–size screen holder\u003c\/strong\u003e (print-head cover \u003cstrong\u003ereplacement\u003c\/strong\u003e)\u003cbr\u003e• Basic mounting accessories (may vary by batch)\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cp\u003e• For A1 \/ A1 Mini, use the included \u003cstrong\u003eclear screen holder\u003c\/strong\u003e to replace the stock print-head cover\u003cbr\u003e• Power off, remove the original cover, fit the holder, then mount Knomi; reuse factory screws where applicable\u003cbr\u003e• Route cables with gentle bends; avoid pinching\u003c\/p\u003e\n\u003ch3\u003eProduct details\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Semi-transparent matte housing\u003cbr\u003e• \u003cstrong\u003eDisplay:\u003c\/strong\u003e Color, wide viewing angle\u003cbr\u003e• \u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wi-Fi, OTA updates\u003cbr\u003e• \u003cstrong\u003eFeatures:\u003c\/strong\u003e Live printer status, user GIFs, web-based config\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over \u003cstrong\u003e$60\u003c\/strong\u003e\u003cbr\u003e• In-store pickup available — setup tips from active users\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eElectronics and accessories are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/1040000075-Panda_Knomi_EN_1__20250312.jpg?v=1741687940\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072942143,"sku":"BQKNOMI-SCREEN+CASE","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/3c0af993-1060000746-_1000_5.webp?v=1757004428"},{"product_id":"panda-claw-a1-a1mini","title":"Panda Claw for A1\/A1 Mini","description":"\u003ch2\u003eBIQU Panda Claw Extruder Gear Set — Bambu \u003cstrong\u003eA1 Series\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eGolden Nano-Coated Hardened Steel Gear • Aluminum CNC Support\u003c\/p\u003e\n\u003cp\u003eUpgrade the A1’s filament drive with a \u003cstrong\u003egolden nano-coated, hardened-steel\u003c\/strong\u003e claw gear and \u003cstrong\u003eCNC-machined aluminum\u003c\/strong\u003e support. Delivers stronger bite, smoother feeding, and long service life—great for day-to-day printing and tougher materials.\u003c\/p\u003e\n\u003ch3\u003eWhy you’ll like it\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHigh grip, low slip:\u003c\/strong\u003e Positive filament bite for clean starts and retractions\u003cbr\u003e• \u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Hardened steel with nano coat resists wear and corrosion\u003cbr\u003e• \u003cstrong\u003eRigid support:\u003c\/strong\u003e CNC aluminum bracket keeps gear alignment true under load\u003cbr\u003e• \u003cstrong\u003eCleaner surfaces:\u003c\/strong\u003e More consistent extrusion = fewer blobs\/zits\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003ePrinters:\u003c\/strong\u003e Bambu \u003cstrong\u003eA1 \/ A1 Mini \/ A1 Combo\u003c\/strong\u003e (extruder side)\u003cbr\u003e• \u003cstrong\u003eFilaments:\u003c\/strong\u003e PLA, PETG, ABS\/ASA, TPU; suitable for many filled filaments*\u003c\/p\u003e\n\u003cp\u003e*For abrasive CF\/GF blends, expect normal nozzle wear; keep filament dry for best results.\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cp\u003e• Power off and cool the toolhead\u003cbr\u003e• Swap parts, and re-tension the idler\u003cbr\u003e• Calibrate \u003cstrong\u003eE-steps\/flow\u003c\/strong\u003e if needed; run a short extrusion test\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eHardened steel claw gear (gold nano-coat)\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003eAluminum CNC support\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free Winnipeg courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eAccessories and consumables are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda_Claw_20240918_EN_1.jpg?v=1726653976\"\u003e\u003c\/div\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003072909375,"sku":"BQCLAW-A1","price":23.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/65df58df-1060000711-A1.webp?v=1757004427"},{"product_id":"panda-door-upgrade-p1-x1","title":"Panda Door Upgrade P1\/X1","description":"\u003ch2\u003eBIQU Panda Door – Dark Gray PC Upgrade Panel for Bambu Lab P1 \/ X1\u003c\/h2\u003e\n\u003cp\u003eDurable Polycarbonate • Factory Fit • Simple Upgrade\u003c\/p\u003e\n\u003cp\u003eReplace your original glass front with the \u003cstrong\u003eBIQU Panda Door\u003c\/strong\u003e, a \u003cstrong\u003edark gray polycarbonate (PC)\u003c\/strong\u003e panel designed for Bambu Lab \u003cstrong\u003eP1\u003c\/strong\u003e and \u003cstrong\u003eX1\u003c\/strong\u003e series printers. The tinted finish adds a clean, professional look while improving chamber heat retention and reducing drafts during printing.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMaterial:\u003c\/strong\u003e Dark gray PC (polycarbonate)\u003cbr\u003e• \u003cstrong\u003eFit:\u003c\/strong\u003e Direct replacement for the factory glass door\u003cbr\u003e• \u003cstrong\u003eHardware:\u003c\/strong\u003e Reuse your stock hinges, screws, and magnets\u003cbr\u003e• \u003cstrong\u003eInstall note:\u003c\/strong\u003e\u003cbr\u003e– Use a \u003cstrong\u003eheat gun\u003c\/strong\u003e to gently warm the glue behind the factory glass door\u003cbr\u003e– \u003cstrong\u003ePry each hinge off slowly\u003c\/strong\u003e, one at a time\u003cbr\u003e– Install the new PC door using your original hardware\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e• Bambu Lab P1 Series\u003cbr\u003e• Bambu Lab X1 Series\u003c\/p\u003e\n\u003ch3\u003eLocal advantages (Convoy-Westcan \/ Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• \u003cstrong\u003eFree local courier\u003c\/strong\u003e on eligible orders over $60\u003cbr\u003e• \u003cstrong\u003eIn-store pickup\u003c\/strong\u003e available — installation tips from active Bambu users\u003c\/p\u003e\n\u003ch3\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp\u003eAccessories and consumables are \u003cstrong\u003efinal sale\u003c\/strong\u003e. Approved returns on other items must be \u003cstrong\u003enew and unopened\u003c\/strong\u003e; restocking fees and non-refundable shipping may apply. See our Refund \u0026amp; Return Policy for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__01.gif?v=1724247028\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__02.jpg?v=1724247060\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__03.jpg?v=1724247059\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__04.jpg?v=1724247060\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__05.jpg?v=1724247060\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__06.jpg?v=1724247059\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__07.jpg?v=1724247059\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/Panda-Door__08.jpg?v=1724247060\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003073007679,"sku":"BQDOOR-DARK","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/5313b401-1060000720-_Panda_Door_1000X1000_15.webp?v=1757004427"},{"product_id":"3m-n95-8210-particulate-respirator-20-per-box","title":"3M N95 8210 Particulate Respirator (20 Per Box)","description":"\u003cp\u003e\u003cstrong data-end=\"208\" data-start=\"156\"\u003e3M™ 8000 Series N95 Respirator Masks – Box of 20\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStay protected on the job with the \u003cstrong data-end=\"296\" data-start=\"245\"\u003e3M™ 8000 Series N95 Disposable Respirator Masks\u003c\/strong\u003e. Trusted across industries, these respirators are built for comfort, breathability, and reliable protection against non-oil-based particles like dust and mist.\u003c\/p\u003e\n\u003cp\u003eEach box contains \u003cstrong data-end=\"507\" data-start=\"476\"\u003e20 NIOSH-approved N95 masks\u003c\/strong\u003e, designed to meet demanding safety standards while keeping users comfortable throughout the workday.\u003c\/p\u003e\n\u003ch3 data-end=\"623\" data-start=\"610\" class=\"\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul data-end=\"1208\" data-start=\"624\"\u003e\n\u003cli data-end=\"710\" data-start=\"624\" class=\"\"\u003e\n\u003cstrong data-end=\"660\" data-start=\"626\"\u003eNIOSH Certified N95 Protection\u003c\/strong\u003e – Filters out at least 95% of airborne particles.\u003c\/li\u003e\n\u003cli data-end=\"832\" data-start=\"711\" class=\"\"\u003e\n\u003cstrong data-end=\"737\" data-start=\"713\"\u003e3M™ Cool Flow™ Valve\u003c\/strong\u003e (on select models) – Helps release heat and moisture for easier breathing in hot environments.\u003c\/li\u003e\n\u003cli data-end=\"928\" data-start=\"833\" class=\"\"\u003e\n\u003cstrong data-end=\"857\" data-start=\"835\"\u003eCustom Fit Options\u003c\/strong\u003e – Adjustable nose clip and soft inner lining improve comfort and seal.\u003c\/li\u003e\n\u003cli data-end=\"1039\" data-start=\"929\" class=\"\"\u003e\n\u003cstrong data-end=\"951\" data-start=\"931\"\u003eComfortable Wear\u003c\/strong\u003e – Lightweight cup design with soft foam nose pad and dual elastic or adjustable straps.\u003c\/li\u003e\n\u003cli data-end=\"1116\" data-start=\"1040\" class=\"\"\u003e\n\u003cstrong data-end=\"1074\" data-start=\"1042\"\u003e3M™ Proprietary Filter Media\u003c\/strong\u003e – Engineered for easy, efficient airflow.\u003c\/li\u003e\n\u003cli data-end=\"1208\" data-start=\"1117\" class=\"\"\u003e\n\u003cstrong data-end=\"1141\" data-start=\"1119\"\u003eColor-coded straps\u003c\/strong\u003e for quick identification (FFP1 – Yellow, FFP2 – Blue, FFP3 – Red).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with most \u003cstrong data-end=\"1268\" data-start=\"1231\"\u003e3M eyewear and hearing protection\u003c\/strong\u003e, these respirators are ideal for construction sites, industrial settings, and general dust protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-end=\"1390\" data-start=\"1373\"\u003eBox includes:\u003c\/strong\u003e 20 disposable masks\u003cbr data-end=\"1413\" data-start=\"1410\"\u003e\u003cstrong data-end=\"1425\" data-start=\"1413\"\u003eUse for:\u003c\/strong\u003e Dust, mists, and certain airborne particles (non-oil)\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":42003073269823,"sku":"8210","price":19.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/2948548f-3m-particulate-respirator-8210-n95-160-ea-case.avif?v=1757004428"},{"product_id":"pla-translucent","title":"PLA Translucent","description":"\u003ch2 data-start=\"116\" data-end=\"177\"\u003eBambu Lab PLA Translucent — Frosted Look, Glows with Light\u003c\/h2\u003e\n\u003cp data-start=\"179\" data-end=\"397\"\u003ePLA Translucent produces a soft, frosted finish that diffuses light beautifully. It’s easy to print, bonds seamlessly with standard PLA, and is ideal for lampshades, décor, windowed logos, and illuminated accent parts.\u003c\/p\u003e\n\u003chr data-start=\"399\" data-end=\"402\"\u003e\n\u003ch3 data-start=\"404\" data-end=\"434\"\u003eWhy Choose PLA Translucent\u003c\/h3\u003e\n\u003cp data-start=\"435\" data-end=\"694\"\u003e• \u003cstrong data-start=\"437\" data-end=\"461\"\u003eSoft light diffusion\u003c\/strong\u003e for an even, glowing effect\u003cbr data-start=\"489\" data-end=\"492\"\u003e• \u003cstrong data-start=\"494\" data-end=\"512\"\u003ePLA-compatible\u003c\/strong\u003e — bonds cleanly with any standard PLA for accents or windows\u003cbr data-start=\"573\" data-end=\"576\"\u003e• \u003cstrong data-start=\"578\" data-end=\"594\"\u003eMore durable\u003c\/strong\u003e than typical translucent PLA blends\u003cbr data-start=\"630\" data-end=\"633\"\u003e• \u003cstrong data-start=\"635\" data-end=\"652\"\u003eEasy to print\u003c\/strong\u003e with low warp and reliable first layers\u003c\/p\u003e\n\u003chr data-start=\"696\" data-end=\"699\"\u003e\n\u003ch3 data-start=\"701\" data-end=\"718\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"719\" data-end=\"879\"\u003e• Printers: Open or enclosed systems\u003cbr data-start=\"755\" data-end=\"758\"\u003e• AMS compatible\u003cbr data-start=\"774\" data-end=\"777\"\u003e• Nozzles: 0.4 \/ 0.6 \/ 0.8 mm\u003cbr data-start=\"806\" data-end=\"809\"\u003e• Build plates: Smooth PEI, Textured PEI, SuperTack, 3D Effect Plate\u003c\/p\u003e\n\u003chr data-start=\"881\" data-end=\"884\"\u003e\n\u003ch3 data-start=\"886\" data-end=\"927\"\u003eRecommended Settings (Starting Point)\u003c\/h3\u003e\n\u003cp data-start=\"928\" data-end=\"1053\"\u003e• Nozzle: 205–225 °C\u003cbr data-start=\"948\" data-end=\"951\"\u003e• Bed: 50–60 °C\u003cbr data-start=\"966\" data-end=\"969\"\u003e• Speed: 60–120 mm\/s\u003cbr data-start=\"989\" data-end=\"992\"\u003e• Cooling: Moderate; avoid excessive fan for best diffusion\u003c\/p\u003e\n\u003chr data-start=\"1055\" data-end=\"1058\"\u003e\n\u003ch3 data-start=\"1060\" data-end=\"1082\"\u003eTips for Best Glow\u003c\/h3\u003e\n\u003cp data-start=\"1083\" data-end=\"1332\"\u003e• Use \u003cstrong data-start=\"1089\" data-end=\"1103\"\u003ethin walls\u003c\/strong\u003e for brighter glow, thicker walls for softer diffusion\u003cbr data-start=\"1157\" data-end=\"1160\"\u003e• Slightly higher nozzle temps improve light transmission\u003cbr data-start=\"1217\" data-end=\"1220\"\u003e• Slow outer walls for a cleaner frosted finish\u003cbr data-start=\"1267\" data-end=\"1270\"\u003e• Mix with opaque PLA mid-print for windows, bands, or logos\u003c\/p\u003e\n\u003chr data-start=\"1334\" data-end=\"1337\"\u003e\n\u003ch3 data-start=\"1339\" data-end=\"1360\"\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cp data-start=\"1361\" data-end=\"1443\"\u003e• PLA Translucent filament (1.75 mm ± 0.03 mm)\u003cbr data-start=\"1407\" data-end=\"1410\"\u003e• Reusable spool with desiccant\u003c\/p\u003e\n\u003chr data-start=\"1445\" data-end=\"1448\"\u003e\n\u003ch3 data-start=\"1450\" data-end=\"1459\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"1460\" data-end=\"1651\"\u003e• Transparency depends on wall thickness, temperature, and geometry\u003cbr data-start=\"1527\" data-end=\"1530\"\u003e• Frosted look by design — softer glow vs. crystal-clear materials\u003cbr data-start=\"1596\" data-end=\"1599\"\u003e• Store sealed with desiccant for best consistency\u003c\/p\u003e\n\u003chr data-start=\"1653\" data-end=\"1656\"\u003e\n\u003ch3 data-start=\"1658\" data-end=\"1677\"\u003ePolicy Snapshot\u003c\/h3\u003e\n\u003cp data-start=\"1678\" data-end=\"1814\"\u003eFilament is final sale. Approved returns on other items must be new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Teal (13612)","offer_id":42003073630271,"sku":"13612","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Blue (13611)","offer_id":42003073663039,"sku":"13611","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Purple (13710)","offer_id":42003073695807,"sku":"13710","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Orange (13301)","offer_id":42003073728575,"sku":"13301","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Red (13210)","offer_id":42003073761343,"sku":"13210","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Light Jade (13510)","offer_id":42003073794111,"sku":"13510","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Mellow Yellow (13410)","offer_id":42003073826879,"sku":"13410","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Cherry Pink (13211)","offer_id":42003073859647,"sku":"13211","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"Ice Blue (13610)","offer_id":42003073892415,"sku":"13610","price":22.99,"currency_code":"CAD","in_stock":false},{"title":"Lavender (13711)","offer_id":42003073925183,"sku":"13711","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/d303d3ef-light_blue-scaled.jpg?v=1793390019"},{"product_id":"bambu-lab-p1s-ams-2-pro-combo","title":"Bambu Lab P1S AMS 2 Pro Combo","description":"\u003ch2\u003eBambu Lab P1S Combo with AMS 2 Pro — Enclosed, Multicolor, Reliable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eP1S Combo\u003c\/strong\u003e pairs Bambu Lab’s enclosed P-series workhorse with the \u003cstrong\u003eAMS 2 Pro\u003c\/strong\u003e for dependable multi-color and multi-material printing out of the box. A rigid CoreXY motion system, full auto-calibration, and an enclosed, filtered chamber deliver consistent results with minimal tuning.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat’s Included (Combo)\u003c\/h3\u003e\n\u003cp\u003e• Bambu Lab P1S 3D Printer\u003cbr\u003e• AMS 2 Pro (Automatic Material System)\u003cbr\u003e• Required cables and adapters\u003cbr\u003e• Choice of \u003cstrong\u003eFilament Buffer\u003c\/strong\u003e (single AMS) or \u003cstrong\u003e4-Port AMS Hub\u003c\/strong\u003e (multi-AMS)\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy Choose the P1S Combo\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMulti-color ready\u003c\/strong\u003e: automatic filament switching; expandable to \u003cstrong\u003eup to 16 colors\/materials\u003c\/strong\u003e with multiple AMS units\u003cbr\u003e• \u003cstrong\u003eEnclosed \u0026amp; filtered\u003c\/strong\u003e: stabilizes prints and helps manage odors\u003cbr\u003e• \u003cstrong\u003eFast \u0026amp; consistent\u003c\/strong\u003e: CoreXY motion with vibration and flow compensation\u003cbr\u003e• \u003cstrong\u003eLow-touch workflow\u003c\/strong\u003e: auto leveling, Z-offset, and start-of-print checks\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAMS 2 Pro Highlights\u003c\/h3\u003e\n\u003cp\u003e• Holds \u003cstrong\u003e4 spools per unit\u003c\/strong\u003e with automated switching\u003cbr\u003e• \u003cstrong\u003eActive filament drying capability\u003c\/strong\u003e to improve reliability with moisture-sensitive materials\u003cbr\u003e• Smarter spool handling with reduced tangles and quieter operation\u003cbr\u003e• Expandable with hub for higher color\/material counts\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Specs (Summary)\u003c\/h3\u003e\n\u003cp\u003e• Build volume: 256 × 256 × 256 mm\u003cbr\u003e• Hotend: all-metal, up to 300 °C\u003cbr\u003e• Bed: heated, up to 100 °C\u003cbr\u003e• Cooling \u0026amp; filtration: multi-fan system with activated-carbon filter\u003cbr\u003e• Camera: basic chamber monitoring \u0026amp; timelapse\u003cbr\u003e• Control: LAN \u0026amp; cloud connectivity\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWho It’s For\u003c\/h3\u003e\n\u003cp\u003e• Makers who want enclosed reliability with multi-color capability\u003cbr\u003e• Schools and offices needing clean, contained operation\u003cbr\u003e• Print farms standardizing on a proven P-series platform\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eLocal Advantages (Convoy-Westcan, Winnipeg)\u003c\/h3\u003e\n\u003cp\u003e• Same-day or next-business-day dispatch when in stock\u003cbr\u003e• Free local courier on eligible orders over $60\u003cbr\u003e• In-store pickup available\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePolicy Snapshot\u003c\/h3\u003e\n\u003cp\u003e3D printers, AMS units, and filament are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Combo With Hub","offer_id":42003074154559,"sku":"PF001-U+SA007+SA002-N","price":849.0,"currency_code":"CAD","in_stock":false},{"title":"Combo With Buffer","offer_id":42003074187327,"sku":"PF001-U+SA007+SA003","price":799.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/bambu-lab-p1s-ams-2-pro-combo-3d-printer.jpg?v=1793950751"},{"product_id":"bambu-lab-smoke-purifier","title":"Bambu Lab Smoke Purifier","description":"\u003ch2 data-start=\"116\" data-end=\"141\"\u003eBambu Smoke Purifier\u003c\/h2\u003e\n\u003cp data-start=\"142\" data-end=\"210\"\u003e\u003cstrong data-start=\"142\" data-end=\"210\"\u003eMulti-Stage Filtration • VOC Reduction • Compact \u0026amp; High-Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"212\" data-end=\"480\"\u003eImprove air quality while laser cutting, engraving, or printing. The Bambu Smoke Purifier uses a multi-stage filtration system to capture fine particles and reduce odors and VOCs, all in a compact, high-capacity unit designed for long filter life and easy maintenance.\u003c\/p\u003e\n\u003ch3 data-start=\"482\" data-end=\"515\"\u003eWhy choose the Smoke Purifier\u003c\/h3\u003e\n\u003cp data-start=\"516\" data-end=\"857\"\u003e• \u003cstrong data-start=\"518\" data-end=\"559\"\u003e99% particle capture (down to 0.3 μm)\u003c\/strong\u003e with HEPA H13 filtration\u003cbr data-start=\"584\" data-end=\"587\"\u003e• \u003cstrong data-start=\"589\" data-end=\"613\"\u003eVOC \u0026amp; odor reduction\u003c\/strong\u003e via high-performance activated carbon\u003cbr data-start=\"651\" data-end=\"654\"\u003e• \u003cstrong data-start=\"656\" data-end=\"682\"\u003eMulti-stage filtration\u003c\/strong\u003e for broad particulate coverage\u003cbr data-start=\"713\" data-end=\"716\"\u003e• \u003cstrong data-start=\"718\" data-end=\"751\"\u003eCompact, high-capacity design\u003c\/strong\u003e for longer intervals between filter changes\u003cbr data-start=\"795\" data-end=\"798\"\u003e• \u003cstrong data-start=\"800\" data-end=\"819\"\u003eQuiet operation\u003c\/strong\u003e with simple, tool-light maintenance\u003c\/p\u003e\n\u003ch3 data-start=\"859\" data-end=\"880\"\u003eFiltration stages\u003c\/h3\u003e\n\u003cp data-start=\"881\" data-end=\"1079\"\u003e• G4 primary filter — coarse dust and debris\u003cbr data-start=\"925\" data-end=\"928\"\u003e• F8 medium filter — fine particulate pre-filtration\u003cbr data-start=\"980\" data-end=\"983\"\u003e• HEPA H13 filter — ultra-fine particles\u003cbr data-start=\"1023\" data-end=\"1026\"\u003e• Activated carbon filter — VOC and odor adsorption\u003c\/p\u003e\n\u003ch3 data-start=\"1081\" data-end=\"1098\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"1099\" data-end=\"1263\"\u003e• Designed for \u003cstrong data-start=\"1114\" data-end=\"1137\"\u003eBambu Lab H2D Laser\u003c\/strong\u003e and \u003cstrong data-start=\"1142\" data-end=\"1155\"\u003eH2S Laser\u003c\/strong\u003e systems\u003cbr data-start=\"1163\" data-end=\"1166\"\u003e• Also suitable for improving local air quality near enclosed printers or other maker equipment\u003c\/p\u003e\n\u003ch3 data-start=\"1265\" data-end=\"1286\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1287\" data-end=\"1477\"\u003e• Smoke Purifier unit\u003cbr data-start=\"1308\" data-end=\"1311\"\u003e• 2 m ventilation pipe\u003cbr data-start=\"1333\" data-end=\"1336\"\u003e• Ventilation pipe clamp\u003cbr data-start=\"1360\" data-end=\"1363\"\u003e• G4 primary filters ×3 (1 installed, 2 spares)\u003cbr data-start=\"1410\" data-end=\"1413\"\u003e• F8 medium filter (installed)\u003cbr data-start=\"1443\" data-end=\"1446\"\u003e• HEPA H13 filter (installed)\u003c\/p\u003e\n\u003ch3 data-start=\"1479\" data-end=\"1502\"\u003eUsage \u0026amp; maintenance\u003c\/h3\u003e\n\u003cp data-start=\"1503\" data-end=\"1670\"\u003e• Audible alert indicates when filters need replacement\u003cbr data-start=\"1558\" data-end=\"1561\"\u003e• Ensure ventilation pipe and clamp are fully secured\u003cbr data-start=\"1614\" data-end=\"1617\"\u003e• Replace filters if airflow drops or odors persist\u003c\/p\u003e\n\u003ch3 data-start=\"1672\" data-end=\"1691\"\u003eProduct details\u003c\/h3\u003e\n\u003cp data-start=\"1692\" data-end=\"1777\"\u003e• Color: Gray\u003cbr data-start=\"1705\" data-end=\"1708\"\u003e• Packaging size: 465 × 400 × 620 mm\u003cbr data-start=\"1744\" data-end=\"1747\"\u003e• Packaging weight: ~17.5 kg\u003c\/p\u003e\n\u003ch3 data-start=\"1779\" data-end=\"1788\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"1789\" data-end=\"1935\"\u003e• Improves local air quality but does \u003cstrong data-start=\"1827\" data-end=\"1834\"\u003enot\u003c\/strong\u003e replace proper room ventilation\u003cbr data-start=\"1866\" data-end=\"1869\"\u003e• Always follow material safety and machine operating guidelines\u003c\/p\u003e\n\u003ch3 data-start=\"1937\" data-end=\"1947\"\u003ePolicy\u003c\/h3\u003e\n\u003cp data-start=\"1948\" data-end=\"2095\"\u003eAccessories and consumables are final sale. Approved returns (if any) must be unused and unopened; restocking fees and shipping are non-refundable.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003074351167,"sku":"SP001-US","price":729.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/e76c8f38-SP001.jpg?v=1757004431"},{"product_id":"bambu-lab-h2d-pro","title":"Bambu Lab H2D Pro","description":"\u003ch2 data-start=\"114\" data-end=\"193\"\u003eBambu Lab H2D Pro — Dual-Nozzle, Enterprise-Ready, Multi-Material Production\u003c\/h2\u003e\n\u003cp data-start=\"195\" data-end=\"543\"\u003eThe H2D Pro is Bambu Lab’s enterprise-focused, large-format dual-nozzle 3D printer designed for fast, repeatable production and secure deployment. This Pro combo includes \u003cstrong data-start=\"366\" data-end=\"376\"\u003eAMS HT\u003c\/strong\u003e, \u003cstrong data-start=\"378\" data-end=\"391\"\u003eAMS 2 Pro\u003c\/strong\u003e, and the \u003cstrong data-start=\"401\" data-end=\"425\"\u003eVision Encoder Plate\u003c\/strong\u003e, delivering advanced material handling, high-temperature capability, and precision motion calibration out of the box.\u003c\/p\u003e\n\u003cp data-start=\"545\" data-end=\"734\"\u003eWith a rigid enclosed frame, 350 °C hotends, active chamber heating (~65 °C), and closed-loop servo extrusion, the H2D Pro is built for functional parts, fixtures, and long-run reliability.\u003c\/p\u003e\n\u003ch3 data-start=\"736\" data-end=\"775\"\u003eWhy choose the H2D Pro (this combo)\u003c\/h3\u003e\n\u003cp data-start=\"776\" data-end=\"1194\"\u003e• Dual-nozzle system for cleaner supports, reduced purging, and multi-material workflows\u003cbr data-start=\"864\" data-end=\"867\"\u003e• Enterprise networking: Ethernet and WPA2-Enterprise Wi-Fi with admin-friendly controls\u003cbr data-start=\"955\" data-end=\"958\"\u003e• High-temperature printing: 350 °C hotend, heated bed, and actively warmed chamber\u003cbr data-start=\"1041\" data-end=\"1044\"\u003e• Included automation: AMS HT, AMS 2 Pro, and Vision Encoder Plate\u003cbr data-start=\"1110\" data-end=\"1113\"\u003e• Designed for repeatability with start-of-print checks and motion compensation\u003c\/p\u003e\n\u003ch3 data-start=\"1196\" data-end=\"1212\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"1213\" data-end=\"1638\"\u003e• Dual independent nozzles with quick-swap hotend design\u003cbr data-start=\"1269\" data-end=\"1272\"\u003e• Closed-loop servo extrusion for stable flow and jam detection\u003cbr data-start=\"1335\" data-end=\"1338\"\u003e• Active chamber heating to ~65 °C for improved adhesion and warp control\u003cbr data-start=\"1411\" data-end=\"1414\"\u003e• Vision Encoder support for high-accuracy XY calibration on large and long prints\u003cbr data-start=\"1496\" data-end=\"1499\"\u003e• Integrated cameras with bright internal lighting for monitoring and timelapse\u003cbr data-start=\"1578\" data-end=\"1581\"\u003e• 5-inch touchscreen with LAN and cloud control options\u003c\/p\u003e\n\u003ch3 data-start=\"1640\" data-end=\"1673\"\u003eBuild volume \u0026amp; printable area\u003c\/h3\u003e\n\u003cp data-start=\"1674\" data-end=\"1866\"\u003e• Single-nozzle mode: approx. \u003cstrong data-start=\"1704\" data-end=\"1726\"\u003e325 × 320 × 325 mm\u003c\/strong\u003e\u003cbr data-start=\"1726\" data-end=\"1729\"\u003e• Dual-nozzle mode (per nozzle): approx. \u003cstrong data-start=\"1770\" data-end=\"1792\"\u003e300 × 320 × 325 mm\u003c\/strong\u003e\u003cbr data-start=\"1792\" data-end=\"1795\"\u003e• Total X-axis travel up to ~350 mm (single-nozzle jobs use full width)\u003c\/p\u003e\n\u003ch3 data-start=\"1868\" data-end=\"1888\"\u003eIncluded systems\u003c\/h3\u003e\n\u003cp data-start=\"1889\" data-end=\"2136\"\u003e• \u003cstrong data-start=\"1891\" data-end=\"1901\"\u003eAMS HT\u003c\/strong\u003e — High-temperature-ready automated material system\u003cbr data-start=\"1952\" data-end=\"1955\"\u003e• \u003cstrong data-start=\"1957\" data-end=\"1970\"\u003eAMS 2 Pro\u003c\/strong\u003e — Multi-color \/ multi-material spool switching (expandable with hubs)\u003cbr data-start=\"2040\" data-end=\"2043\"\u003e• \u003cstrong data-start=\"2045\" data-end=\"2069\"\u003eVision Encoder Plate\u003c\/strong\u003e — Motion calibration accessory for improved dimensional accuracy\u003c\/p\u003e\n\u003ch3 data-start=\"2138\" data-end=\"2162\"\u003eCore specs (summary)\u003c\/h3\u003e\n\u003cp data-start=\"2163\" data-end=\"2424\"\u003e• Hotend: all-metal, up to 350 °C\u003cbr data-start=\"2196\" data-end=\"2199\"\u003e• Bed: heated, up to ~120 °C\u003cbr data-start=\"2227\" data-end=\"2230\"\u003e• Chamber: active heating to ~65 °C\u003cbr data-start=\"2265\" data-end=\"2268\"\u003e• Nozzle: hardened 0.4 mm installed (other sizes supported)\u003cbr data-start=\"2327\" data-end=\"2330\"\u003e• Motion: rigid CoreXY with vibration and flow compensation\u003cbr data-start=\"2389\" data-end=\"2392\"\u003e• Power: 100–120 V (Canada\/US)\u003c\/p\u003e\n\u003ch3 data-start=\"2426\" data-end=\"2449\"\u003eMaterials (typical)\u003c\/h3\u003e\n\u003cp data-start=\"2450\" data-end=\"2601\"\u003e• PLA, PETG, TPU, PVA\u003cbr data-start=\"2471\" data-end=\"2474\"\u003e• ABS, ASA, PC, PA (Nylon), CF\/GF-reinforced materials\u003cbr data-start=\"2528\" data-end=\"2531\"\u003e• Use hardened nozzles and chamber heating for engineering filaments\u003c\/p\u003e\n\u003ch3 data-start=\"2603\" data-end=\"2624\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"2625\" data-end=\"2879\"\u003e• H2D Pro 3D printer with hardened 0.4 mm nozzle\u003cbr data-start=\"2673\" data-end=\"2676\"\u003e• PEI build plate, spool holder, PTFE tube, tools and accessory kit\u003cbr data-start=\"2743\" data-end=\"2746\"\u003e• AMS HT with cables and spool hardware\u003cbr data-start=\"2785\" data-end=\"2788\"\u003e• AMS 2 Pro with cables and spool hardware\u003cbr data-start=\"2830\" data-end=\"2833\"\u003e• Vision Encoder Plate calibration accessory\u003c\/p\u003e\n\u003ch3 data-start=\"2881\" data-end=\"2897\"\u003eWho it’s for\u003c\/h3\u003e\n\u003cp data-start=\"2898\" data-end=\"3048\"\u003e• Production shops and engineering teams\u003cbr data-start=\"2938\" data-end=\"2941\"\u003e• Education labs and secure IT environments\u003cbr data-start=\"2984\" data-end=\"2987\"\u003e• Print farms moving to automated, multi-material workflows\u003c\/p\u003e\n\u003ch3 data-start=\"3050\" data-end=\"3069\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"3070\" data-end=\"3244\"\u003e3D printers, AMS units, and filament are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003075334207,"sku":"PF003-E+SA007+SA008-US","price":3999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/d7373af1-6-1.jpg?v=1757004437"},{"product_id":"bambu-lab-h2s-combo","title":"Bambu Lab H2S AMS Combo","description":"\u003ch2 data-start=\"100\" data-end=\"178\"\u003eBambu Lab H2S (AMS Combo) — Large Format, Multi-Color, Built for Production\u003c\/h2\u003e\n\u003cp data-start=\"180\" data-end=\"509\"\u003eThe H2S AMS Combo combines Bambu Lab’s new large-format platform with automated multi-material printing in a fully enclosed system. With a 340 × 320 × 340 mm build volume, 350 °C hotend, active 65 °C chamber heating, and a closed-loop servo extruder, the H2S is designed for stable, repeatable results on big parts and long jobs.\u003c\/p\u003e\n\u003cp data-start=\"511\" data-end=\"667\"\u003eA large touchscreen, bright internal lighting, and automated checks make it easy to run day-to-day—whether you’re prototyping, teaching, or producing parts.\u003c\/p\u003e\n\u003ch3 data-start=\"669\" data-end=\"701\"\u003eWhy choose the H2S AMS Combo\u003c\/h3\u003e\n\u003cp data-start=\"702\" data-end=\"1127\"\u003e• Multi-color and multi-material printing out of the box with AMS\u003cbr data-start=\"767\" data-end=\"770\"\u003e• Large build volume for helmets, enclosures, fixtures, and production parts\u003cbr data-start=\"846\" data-end=\"849\"\u003e• Closed-loop servo extruder for consistent flow and clean surfaces\u003cbr data-start=\"916\" data-end=\"919\"\u003e• Actively heated chamber to reduce warping and improve layer adhesion\u003cbr data-start=\"989\" data-end=\"992\"\u003e• Enclosed design with airflow control for safer, more predictable printing\u003cbr data-start=\"1067\" data-end=\"1070\"\u003e• Expandable with hubs to add more AMS units and colors\u003c\/p\u003e\n\u003ch3 data-start=\"1129\" data-end=\"1145\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"1146\" data-end=\"1488\"\u003e• 340 × 320 × 340 mm build volume\u003cbr data-start=\"1179\" data-end=\"1182\"\u003e• All-metal quick-swap hotend up to 350 °C\u003cbr data-start=\"1224\" data-end=\"1227\"\u003e• Active chamber heating up to 65 °C\u003cbr data-start=\"1263\" data-end=\"1266\"\u003e• Closed-loop servo extrusion system\u003cbr data-start=\"1302\" data-end=\"1305\"\u003e• Automatic vibration and flow compensation\u003cbr data-start=\"1348\" data-end=\"1351\"\u003e• AI-assisted filament path monitoring and error detection\u003cbr data-start=\"1409\" data-end=\"1412\"\u003e• Large touchscreen interface with improved lighting and camera monitoring\u003c\/p\u003e\n\u003ch3 data-start=\"1490\" data-end=\"1517\"\u003ePrecision \u0026amp; calibration\u003c\/h3\u003e\n\u003cp data-start=\"1518\" data-end=\"1728\"\u003e• Supports Vision Encoder (sold separately) for high-accuracy XY calibration\u003cbr data-start=\"1594\" data-end=\"1597\"\u003e• Helps maintain dimensional accuracy on large or long-running prints\u003cbr data-start=\"1666\" data-end=\"1669\"\u003e• Automatic start-of-print checks and motion compensation\u003c\/p\u003e\n\u003ch3 data-start=\"1730\" data-end=\"1745\"\u003eAMS details\u003c\/h3\u003e\n\u003cp data-start=\"1746\" data-end=\"1951\"\u003e• One AMS included (4 spools per unit)\u003cbr data-start=\"1784\" data-end=\"1787\"\u003e• Automatic filament switching and buffered feeding\u003cbr data-start=\"1838\" data-end=\"1841\"\u003e• Designed to keep filament handling smooth and consistent\u003cbr data-start=\"1899\" data-end=\"1902\"\u003e• Expandable with hubs for additional AMS units\u003c\/p\u003e\n\u003ch3 data-start=\"1953\" data-end=\"1974\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1975\" data-end=\"2140\"\u003e• H2S 3D printer\u003cbr data-start=\"1991\" data-end=\"1994\"\u003e• Textured PEI build plate\u003cbr data-start=\"2020\" data-end=\"2023\"\u003e• AMS unit with required cables and spool hardware\u003cbr data-start=\"2073\" data-end=\"2076\"\u003e• Spool holder, accessory kit, safety key, and setup materials\u003c\/p\u003e\n\u003ch3 data-start=\"2142\" data-end=\"2158\"\u003eWho it’s for\u003c\/h3\u003e\n\u003cp data-start=\"2159\" data-end=\"2358\"\u003e• Shops and teams printing large parts with minimal tuning\u003cbr data-start=\"2217\" data-end=\"2220\"\u003e• Schools and makerspaces needing enclosed, multi-material capability\u003cbr data-start=\"2289\" data-end=\"2292\"\u003e• Print farms scaling up to larger formats and higher throughput\u003c\/p\u003e\n\u003ch3 data-start=\"2360\" data-end=\"2379\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2380\" data-end=\"2554\"\u003e3D printers, AMS units, and filament are final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":42003075301439,"sku":"PF003-S+SA007","price":1599.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/H2SC_1.jpg?v=1793391961"},{"product_id":"pla-silk-dual-color","title":"PLA Silk Multi Color","description":"\u003ch2 data-start=\"137\" data-end=\"198\"\u003ePLA Silk Multi-Color — Shiny Finish, Built-In Color Shifts\u003c\/h2\u003e\n\u003cp data-start=\"200\" data-end=\"481\"\u003ePLA Silk Multi-Color delivers a glossy “silk” surface with smooth, pre-blended color transitions along the spool. It prints much like standard PLA but produces eye-catching results that hide layer lines and reflect light beautifully—ideal for decorative and display-focused prints.\u003c\/p\u003e\n\u003ch3 data-start=\"483\" data-end=\"518\"\u003eWhy choose PLA Silk Multi-Color\u003c\/h3\u003e\n\u003cp data-start=\"519\" data-end=\"822\"\u003e• Glossy silk finish that reduces visible layer lines\u003cbr data-start=\"572\" data-end=\"575\"\u003e• Built-in multi-color transitions — no AMS required\u003cbr data-start=\"627\" data-end=\"630\"\u003e• Easy PLA-style printing: low warp, low odor, wide temperature window\u003cbr data-start=\"700\" data-end=\"703\"\u003e• Excellent surface coverage on curves, text, and logos\u003cbr data-start=\"758\" data-end=\"761\"\u003e• AMS \/ AMS 2 Pro \/ AMS HT compatible for automated feeding\u003c\/p\u003e\n\u003ch3 data-start=\"824\" data-end=\"853\"\u003eHow the color shift works\u003c\/h3\u003e\n\u003cp data-start=\"854\" data-end=\"1076\"\u003e• Longer continuous prints (vases, shells, statues) show smoother gradients\u003cbr data-start=\"929\" data-end=\"932\"\u003e• Vase \/ spiral mode produces seamless vertical transitions\u003cbr data-start=\"991\" data-end=\"994\"\u003e• Starting colors and transition length vary by spool — variation is intentional\u003c\/p\u003e\n\u003ch3 data-start=\"1078\" data-end=\"1126\"\u003eRecommended print settings (starting points)\u003c\/h3\u003e\n\u003cp data-start=\"1127\" data-end=\"1388\"\u003e• Nozzle: 200–215 °C (start ~205 °C)\u003cbr data-start=\"1163\" data-end=\"1166\"\u003e• Bed: 40–60 °C (or off on very grippy PEI)\u003cbr data-start=\"1209\" data-end=\"1212\"\u003e• Fan: 60–100% after first layers\u003cbr data-start=\"1245\" data-end=\"1248\"\u003e• Speed: 40–150 mm\/s (slower outer walls = higher shine)\u003cbr data-start=\"1304\" data-end=\"1307\"\u003e• Build plate: Textured or Smooth PEI (use liquid glue if adhesion is strong)\u003c\/p\u003e\n\u003ch3 data-start=\"1390\" data-end=\"1417\"\u003ePro tips for best shine\u003c\/h3\u003e\n\u003cp data-start=\"1418\" data-end=\"1632\"\u003e• Use slightly cooler nozzle temps and slower outer walls\u003cbr data-start=\"1475\" data-end=\"1478\"\u003e• Avoid over-extrusion — it dulls the surface\u003cbr data-start=\"1523\" data-end=\"1526\"\u003e• Lock seam placement to keep decorative faces clean\u003cbr data-start=\"1578\" data-end=\"1581\"\u003e• Skip heavy ironing; it can mute the silk effect\u003c\/p\u003e\n\u003ch3 data-start=\"1634\" data-end=\"1650\"\u003eTypical uses\u003c\/h3\u003e\n\u003cp data-start=\"1651\" data-end=\"1790\"\u003e• Vases, planters, lampshades, desk décor\u003cbr data-start=\"1692\" data-end=\"1695\"\u003e• Figurines, cosplay accents, display props\u003cbr data-start=\"1738\" data-end=\"1741\"\u003e• Signage, gifts, classroom and showcase prints\u003c\/p\u003e\n\u003ch3 data-start=\"1792\" data-end=\"1811\"\u003eSpecs (typical)\u003c\/h3\u003e\n\u003cp data-start=\"1812\" data-end=\"1983\"\u003e• Diameter: 1.75 mm\u003cbr data-start=\"1831\" data-end=\"1834\"\u003e• Net weight: varies by option (commonly 1 kg)\u003cbr data-start=\"1880\" data-end=\"1883\"\u003e• Material: PLA with silk-finish modifiers\u003cbr data-start=\"1925\" data-end=\"1928\"\u003e• Storage: keep sealed with desiccant when not in use\u003c\/p\u003e\n\u003ch3 data-start=\"1985\" data-end=\"2002\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-start=\"2003\" data-end=\"2166\"\u003e• Compatible with A1, A1 Mini, P1P, P1S, P2S, X1, X1 Carbon, X1E, and most 1.75 mm FDM printers\u003cbr data-start=\"2098\" data-end=\"2101\"\u003e• AMS compatible (active drying typically not required for PLA)\u003c\/p\u003e\n\u003ch3 data-start=\"2168\" data-end=\"2177\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-start=\"2178\" data-end=\"2347\"\u003e• PLA has lower heat resistance than PETG — avoid high-temperature environments\u003cbr data-start=\"2257\" data-end=\"2260\"\u003e• Optimized for appearance; choose PETG or engineering filaments for structural parts\u003c\/p\u003e\n\u003ch3 data-start=\"2349\" data-end=\"2368\"\u003ePolicy snapshot\u003c\/h3\u003e\n\u003cp data-start=\"2369\" data-end=\"2514\"\u003eFilament is final sale. Any approved return on other items must be brand new and unopened; restocking fees and non-refundable shipping may apply.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Neon City (Blue\/Magenta)","offer_id":42003321520191,"sku":"13903","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Midnight Blaze (Blue\/Red)","offer_id":42003424608319,"sku":"13902","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Gilded Rose (Pink\/Gold)","offer_id":42003424641087,"sku":"13901","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Blue Hawaii (Blue\/Green)","offer_id":42003424673855,"sku":"13904","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Velvet Eclipse (Black\/Red)","offer_id":42003424706623,"sku":"13905","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Dawn Radiance (Rainbow)","offer_id":42003424739391,"sku":"13912","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Aurora Purple (Purple-Blue)","offer_id":42003424772159,"sku":"13909","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"South Beach (Pink-Teal)","offer_id":42003424804927,"sku":"13906","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Phantom Blue (Blue\/Black)","offer_id":42789954125887,"sku":"13916","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Mystic Magenta (Magenta\/Green)","offer_id":42789956845631,"sku":"13913","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/Aurora_Purple_1-600x600.jpg?v=1793388833"},{"product_id":"panda-branch-v1-0","title":"Panda Branch V1.0","description":"\u003cdiv class=\"cw-intro\"\u003e\u003cp\u003eThe BIGTREETECH Panda Branch is a 4-port 5 V USB power expansion board for Bambu Lab P1, X1 and A1 series printers. It takes 24 V from the printer's AMS connection, passes the AMS or AMS Lite through on its MX3.0 2x2-pin port, and gives you four USB-A outputs, each set by DIP switch to 1 A, 2 A or 2.7 A peak, with over-current and reverse-connection protection and a red fault LED per port. That is enough to run a Panda Touch, a Panda Knomi, LED strips and a small fan at once; on X1 printers it is the usual way to power a Knomi. Main board 145 x 20 x 20 mm, so it tucks inside the chamber. In the box: Panda Branch, power cable, 4 M3x10 self-tapping screws, 2 M3x35 cap screws and a BTT duck. Winnipeg pickup or Canada-wide shipping from Convoy-Westcan.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch2\u003e4-port 5 V USB power expansion board for Bambu Lab P1 \/ X1 \/ A1\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"BIGTREETECH Panda Branch 4-port USB power board\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/1030000159-Panda_Branch_EN_1__20241010.jpg?v=1728549470\"\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":42003443286079,"sku":"BQBRANCH","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/2442\/4255\/files\/1030000159-Panda_Branch_1000_7.webp?v=1757026177"}],"url":"https:\/\/convoywestcan.ca\/collections\/deals.oembed?page=3","provider":"Convoy-Westcan 3D Printers, Industrial Supplies \u0026 Fasteners","version":"1.0","type":"link"}