PLA Aero

Bambu PLA Aero — Lightweight Foaming PLA for RC & Aerodynamic Prints

Low Density • Impact Resistant • Matte Finish

Overview

PLA Aero is a foaming PLA engineered for lightweight, aerodynamic prints like RC planes, wings, gliders, and UAV parts. At higher nozzle temperatures it expands internally, cutting part weight by up to ~50% while retaining toughness and flight-ready durability.

Why choose PLA Aero

• Ultra-lightweight prints — typically 50–80% the density of standard PLA
• Foaming control — tune weight and stiffness via temperature and flow
• Impact resistant — tougher than traditional balsa-style or foaming PLAs
• Matte, paint-ready finish — sands and finishes easily
• AMS & AMS Lite compatible

Recommended starting settings

• Drying: 55 °C × 8 h (before use)
• Nozzle: 220–260 °C (higher temp = more foaming)
• Bed: 35–45 °C
• Speed: ≤ 180 mm/s
• Storage: < 20% RH, sealed with desiccant

Material properties (typical)

• Filament density: 1.21 g/cm³
• Printed density: ~0.55–1.05 g/cm³ (settings dependent)
• Tensile strength: 24 ± 2 MPa
• Impact strength: 28.8 ± 1.3 kJ/m²
• Vicat softening: ~54 °C

Notes

• Dry thoroughly—moisture reduces foaming consistency
• Filament is softer than standard PLA; load/unload gently
• 0.4 mm hardened nozzle recommended for stable extrusion

What’s in the box

• PLA Aero filament spool
• Desiccant pack

Local advantages (Convoy-Westcan, Winnipeg)

• Same-day or next-business-day dispatch when in stock
• Free local courier on eligible orders over $50
• In-store pickup available